August 19, 201015 yr There might be a future issue with the speakers clearence. You should take into mind the thickness of the fleece and fibers glass because it looks like it's a little too close.Actually that is the floor mat that looks so close. It actually clears the door frame with ease with a little room to spare. I see.
August 19, 201015 yr Author Thanks everybody!More pics tomorrow as I have the floor dampened and all the wiring routed and ran.
August 19, 201015 yr Is this an SQ setup......EDIT: I just saw your running an 18 DR damn now put some rims on that thing. Edited August 19, 201015 yr by cheese20323
August 19, 201015 yr Author Front stage will be all out SQ. DR 18 in the back for a little bass .... New rims and tires are in the budget but probably not till next year.
August 19, 201015 yr Little Bass........ some 24's look found you some........look good on any chevy vehicle.....Good Luck!
August 19, 201015 yr This a rims page from my local dealer......suit yourself lol.....:: Audio City SPECIAL ::
August 19, 201015 yr The doors are coming along nicely!! I am definetly tuned until the end of this build.Heres a link to my doors at the current moument. I plan on doing a build log on the doors when I'm done.The link, go to page 7 if its not already there.Help choosing a 10 inch midbass driver. - SSA Car Audio Forum - Page 7
August 20, 201015 yr Author Wiring is all done got some pics taken before the camera battery died.All new 15 gauge RF Twisted Gamma Technology Speaker Wire.New run of 1/0 Stinger HPM positive. Forgot the run of Negative ... All new Black RF Matrix Twisted RCA's. Went with an all black and silver theme to match my Sundown Amplifiers.BeginningDrivers sideCloseup of drivers sideand finally the backCarpet and interior all back in. Will work on the kicks and doors as family allows.
August 20, 201015 yr The wiring is lookin' clean, always fun once you get that much under the carpet. Thats some crazy looking speaker wire. Keep on truckin'!!AND Hopefully the family will allow you to finish the pods sooner than later..... I know the feeling.
August 21, 201015 yr Author The wiring is lookin' clean, always fun once you get that much under the carpet. Thats some crazy looking speaker wire. Keep on truckin'!!AND Hopefully the family will allow you to finish the pods sooner than later..... I know the feeling.Thanks man!
August 21, 201015 yr Author Back to work tomorrow but when I get home I plan on doing the second door. 90+ degree heat makes the curing process go much faster .... Have an idea of doing the kicks and pods in a gloss white to match the exterior of the truck.Any thoughts on that idea?
August 21, 201015 yr Author Very nice work on the wiring! I can see the time you spent by the pics. Thank You!
August 21, 201015 yr Back to work tomorrow but when I get home I plan on doing the second door. 90+ degree heat makes the curing process go much faster .... Have an idea of doing the kicks and pods in a gloss white to match the exterior of the truck.Any thoughts on that idea? You could paint eveything white and then clear coat it, that would look clean.This time around on my doors, I plan on first painting with a matching interior colored base coat, and then I am going to airbrush some artwork on the doors and clear coat them.
August 22, 201015 yr Author The wife's cousin air brushes and custom paints custom choppers. I have a lot of ideas for the doors!
August 23, 201015 yr The wife's cousin air brushes and custom paints custom choppers. I have a lot of ideas for the doors! Ideas for your doors or mine?I got an airbrush kit traded to me this year from a friend. I have never airbrushed before, but will be giving it a try. I have been a Custom Tattoo Artist for 17+ yrs so I should be good, just a different medium of art.I am planning on painting a city skyline along the bottom of the door and music notes flowing out of the speaker. I will do some ghost skulls or something in powder grey behind everything and then clear coat with Acyrlic or Lauquer. Should look EXTRA sweet!! or thats the idea anyways.
August 24, 201015 yr Author The wife's cousin air brushes and custom paints custom choppers. I have a lot of ideas for the doors! Ideas for your doors or mine?My doors! Going to be adding a flush ring to the doors so it looks flush with the grill attached.Nothing to out of the ordinary going to have him do something evil with the Sundown Logo along the map pocket area.Will see how my finish sanding is and whether the patience holds out for that nice shiny finish!
March 18, 201114 yr Author Finally got around to building the box for my new Sundown SA-15'sFirst the DesignThe Fiberglass Plate (JL Audio ISO-Plate)Test fit before primer and paintThe Port after primerPort primed and paintedBox assembled and ready for black paint (Herculiner Box Liner)First coat of blackCompleted box just needs some touch upI didn't take very many pictures during cutting and assembly as they are pretty straight forward. I tweaked the original design a bit to give it the full recessed look.This box will house two Sundown SA-15" D4 subwoofers.Thanks to Bromo for the design Eclectic Enclosure Design
March 18, 201114 yr That's Damn nice!!! I got 4 of the SA-15's, wanna build me 2 of those? JK, planning on getting with Bromo myself.
March 18, 201114 yr Author That's Damn nice!!! I got 4 of the SA-15's, wanna build me 2 of those? JK, planning on getting with Bromo myself.Badass box man, the mounting baffle and port Thanks guys! Appreciate the kind words!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.