Posted November 24, 201014 yr Popular Post So here is my 2006 RT and started off with this bad boy lolI was not impressedand looked for a REC Nav.Found it!And also the Nav Bezel for $130 at the dealership ( 1CB331ZB-AA NAV Bezel )GPS Antenna ( 56038630-AA )Cant forget the TVandNav2GoAll Done~I never got the TVandNav2Go to work because it was wired wrong and it just didnt work with my REC. So I got fed up with everything and sold it all haha.The New Fun Begins!Sundown Audio SAE 1200 RMS and thats rated at 13.1v2 12 inch fully loaded SSD's from Fi Car Audio. Custom Switches - One to turn on a inverter, the other to power on the modded xbox with 1000's of games, movies, and music.Box being Built!All done for now!!! I still really need a trunk lid liner and a little bit more deadening but its good for now !!!Custom Bass Knob!
November 27, 201014 yr Author Holy chit that looks sweet! (My old xbox has the xecuter chip too )thanks bro!!!
November 27, 201014 yr It looks good, but aren't you concerned with how the air will get back into the cabin?
November 27, 201014 yr It looks good, but aren't you concerned with how the air will get back into the cabin?maybe the seats dont fold down??clean build bud!
November 27, 201014 yr It looks good, but aren't you concerned with how the air will get back into the cabin?maybe the seats dont fold down??clean build bud!nevermind, looks like they do in picture 2
November 27, 201014 yr See pic of the old school XBOX!!! Edited November 27, 201014 yr by Dictator1992
November 28, 201014 yr Classic reverse trunk wall. x2, nice build but I would turn it around if your gonna seal the trunk from the cabin.
November 28, 201014 yr Looks super clean, but i would think to turn it around as well. Nice install What's the box tuned to?
November 29, 201014 yr Author Looks super clean, but i would think to turn it around as well. Nice install What's the box tuned to?33HzMy seats are always down so its really not sealed in the trunk. The falls wall is FG.
November 29, 201014 yr Looks super clean, but i would think to turn it around as well. Nice install What's the box tuned to?33HzMy seats are always down so its really not sealed in the trunk. The falls wall is FG.Your seats have nothing to do with what we are saying, but since you have them down your allowing some pressure to reach the cabin. Your losing output into the cabin very badly by blocking the sound waves from getting into the cabin with the panel on the front of the enclosure, Im pretty sure you have horrible trunk rattle/noise or worse than it would be if you remove the panel or turn the enclosure around.
November 30, 201014 yr Author Your seats have nothing to do with what we are saying, but since you have them down your allowing some pressure to reach the cabin. Your losing output into the cabin very badly by blocking the sound waves from getting into the cabin with the panel on the front of the enclosure, Im pretty sure you have horrible trunk rattle/noise or worse than it would be if you remove the panel or turn the enclosure around.Ya it rattles a bit but nothing horrible after I deadened it. Im good with how loud it is, its not like I am trying to set any records so I will leave it as is.
November 30, 201014 yr If that works for you, that's what it should be. looks damn good doing it too!
December 6, 201014 yr How do you convert the xbox's signal into the head unit? Is there a set of inputs or does it take some special work? Would it work with a 360?
December 6, 201014 yr How do you convert the xbox's signal into the head unit? Is there a set of inputs or does it take some special work? Would it work with a 360?The head unit takes standard composite video (yellow connector) as one of its imputs. It would work with a 360. You'll need an inverter for the xbox to go from 12v DC to 120v AC.Oh and OP, nice job! Very clean, love the xbox!
December 6, 201014 yr How do you convert the xbox's signal into the head unit? Is there a set of inputs or does it take some special work? Would it work with a 360?The head unit takes standard composite video (yellow connector) as one of its imputs. It would work with a 360. You'll need an inverter for the xbox to go from 12v DC to 120v AC.Oh and OP, nice job! Very clean, love the xbox!Thank you. I'm desperate to do something like this now. Very very cool OP I like the whole set up a lot. Whats in the front stage?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.