Posted January 1, 201114 yr I've been slowly changing things on my truck inside and out.... well here is the product after 2 years. Next I'm starting on the interior, after that will be forced induction. I'm uploading pics that were taken off of my phone just because it is easier to do.
January 1, 201114 yr Author Forgot to add that I currently have the following audio components inside;Dual alt kit from DC power, soon to be triple alt kitKnu 0 Gauge4 Optima Yellow Tops2 Sundown Audio 3000D's (only using 1 at .5 ohm currently)2 FI BTL N2 18'SSundown 50.4Q Logic Kick Panel Enclosures2 Polk Audio Component Sets4 Eminence APT horns4 Selenium 6.5'sAVH P4100DVDIt sounds pretty good, I'm just ready for
January 1, 201114 yr looks very nice. you can tell that you have put alot of thoughtful work into it. What size wheels are you running?
January 1, 201114 yr Author looks very nice. you can tell that you have put alot of thoughtful work into it. What size wheels are you running? 24
January 2, 201114 yr Forgot to add that I currently have the following audio components inside;Dual alt kit from DC power, soon to be triple alt kitKnu 0 Gauge4 Optima Yellow Tops2 Sundown Audio 3000D's (only using 1 at .5 ohm currently)2 FI BTL N2 18'SSundown 50.4Q Logic Kick Panel Enclosures2 Polk Audio Component Sets4 Eminence APT horns4 Selenium 6.5'sAVH P4100DVDIt sounds pretty good, I'm just ready for Nice ride!!! Lot of equipment in it as well!!
January 2, 201114 yr yup, it looks really nice! But I also agree to do a drop on it. Don't know if a 2 inch would be enough or not.
January 2, 201114 yr Author 2/3 drop would get the top of the front and rear tires about .5 inches from the fender well... I was really wanting to do it, but the amount of cutting I would have to do makes me think twice.....I appreciate all the compliments everyone. And whoever said something about not adding the chrome mirrors and trim and all that.... that's not my style.. I try to keep a good balance and not overdo any particular part. Edited January 2, 201114 yr by holley2346
January 2, 201114 yr Sweet Hoe. I like it high personally, it's a truck.Debadge it and tint the tails. What are you going to boost it with? Have you looked into anything?I have been giving this a lot of thought lately too vs a 6l cammed. I have been looking at the Squires set up for the 5.3.
January 2, 201114 yr Yeah Im not a fan of the chrome accents, that over does it and no dropping the truck (I dont like doing cutting to make a rim fit and perform properly).
January 2, 201114 yr Author Sweet Hoe. I like it high personally, it's a truck.Debadge it and tint the tails. What are you going to boost it with? Have you looked into anything?I have been giving this a lot of thought lately too vs a 6l cammed. I have been looking at the Squires set up for the 5.3.Im really leaning towards trick performance for my piping and turbo. Then nelson performance for the tune. Ill only run about 7 lbs until I build a forged motor.
January 2, 201114 yr Pics of the audio, but a very nice 'hoe indeed. I like those LED taillights. Oh and dont put those fake chrome air vents on the side either. LOL
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.