Posted October 11, 20195 yr Admin Popular Post We have finally released our new amp. It is a tiny tiny production run to see how people like them. Meant for the high end, SQ market, without the European price tag. If this model moves as well as I hope, it will help spawn another model in the line up soon. https://store.soundsolutionsaudio.com/ssa-dm150-2-2-channel-amplifier-150w-x-2-ch-or-500w-x-1-ch/ Introducing the all new SSA DM150.2 amplifier. An old school approach, with updated components, for the most discerning of ears. If your front stage is lacking warmth and clarity, its time to upgrade. Our first amplifier in our high-end, sound quality, Class- A/B - Demon amplifier line. The SSA DM150.2 is the elite choice for that high end active front stage, premium passive components, and especially a sound quality sub (SSA Demon). We've incorporated direct inputs for those competition installs that use an external DSP and want their amp to be a pure gain block. Stellar looks to match the design and components. Don't let your speakers or your ears down, #levelup to the all new SSA DM150.2 amplifier. 150 Watts RMS X 2 @ 4 Ohm 500 Watts RMS X 1 @ 4 Ohm Angled Terminals for show quality installations Full Complimentary low distortion Class AB design Tiffany Style RCA connectorsFull Complimentary low distortion Class AB design Butterworth Crossover Filters for premium level performance An extra pair of input connectors for a direct input that will bypass the crossover so the amp can act as a gain block The op amps featured are TI chips w/BB technology high performance audio grade IC's Docking Pads® to reduce vibration & extend the life the amplifier DC, Short Circuit, Thermal & Overload Protection, on board fusing Diagnostic LEDs Specifications OUTPUT POWER @ 14.4V input RMS per channel at 4 Ohms 150 W x 2 CH RMS per channel at 2 Ohms 250 W x 2 CH RMS Bridged Mono at 4 Ohms 500 W x 1 CH RMS Mono at 1 Ohm N/A INPUT SENSITIVITY 200mV - 6.0V FREQUENCY RESPONSE 10Hz - 30KHz +/- 0.5dB THD LESS THAN 0.01% S/N RATIO > 103 dB CHANNEL SEPARATION > 91 dB DAMPING FACTOR @100Hz 4 ohm > 200 CROSSOVER RANGE High Pass, 12dB/Octave 80-1.2K Hz Low Pass, 24dB/Octave 10Hz - 250Hz Subsonic N/A Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) Yes Phase Shift (0 - 180 degrees) No Fusing 3 x 40A Size (L x W x H) in 16.4 x 8.9 x 2.2
October 11, 20195 yr Author Admin 1 hour ago, Randal Johnson said: Very nice Amplifier Thanks, this is right up your alley. But you're never going to switch. Hahaha.
October 14, 20195 yr Author Admin On 10/11/2019 at 4:06 PM, Godsmack said: Looks sharp. Not a bad price point either. J Thanks, let's hope they start moving.
October 14, 20195 yr 3 hours ago, Aaron Clinton said: Thanks, let's hope they start moving. I'm sure they will. J
October 15, 20195 yr Author Admin 8 hours ago, ///M5 said: Wish I had a car that needed some tunes! Love the heatsink!!
October 19, 20195 yr On 10/11/2019 at 2:55 PM, Aaron Clinton said: Thanks, this is right up your alley. But you're never going to switch. Hahaha. Thank You for understanding Sir. Just a thought, this would be a great amplifier to run as a pair active on your component set. But not as you would normally think, use one amplifier to run the left side and another amplifier to run the right. From the specs, there should be enough amplifier channel separation to make it work and have excellent system left and right channel separation. Edited October 19, 20195 yr by Randal Johnson
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.