punkmutt1231 0 Posted July 27, 2008 Need a box designed for a Cerwin Vega Vmax 12.2500W RMS1000W Max. Cutout is 11.4" I am looking for a 30hz tune. Had one designed, and almost fully built, come to finish and subwoofer would not fit the front plate. 0 Share this post Link to post Share on other sites
KU40 173 Posted July 27, 2008 was the sub too tall for the front baffle or what? 0 Share this post Link to post Share on other sites
Thumpper 266 Posted July 27, 2008 Need a box designed for a Cerwin Vega Vmax 12.2500W RMS1000W Max. Cutout is 11.4" I am looking for a 30hz tune. Had one designed, and almost fully built, come to finish and subwoofer would not fit the front plate. ouch......that sucks contact me direct thru my link 0 Share this post Link to post Share on other sites
punkmutt1231 0 Posted July 27, 2008 yah it was too tall, i used the Flash tool on here. Just looking for a new design, should i just make everything 2 inches taller or more and go with that? 0 Share this post Link to post Share on other sites
KU40 173 Posted July 28, 2008 what about adding another baffle on the front of the box to bring the sub out a little more? I assume the basket it hitting the MDF for the top/bottom? It may not look the best but you could build a bigger baffle to go on the front and that should give you the clearance for the basket to clear the second (original) baffle. if you don't want to build another box, that is. Or else put the sub on a different face. 0 Share this post Link to post Share on other sites
punkmutt1231 0 Posted July 31, 2008 bumpthumper....ever come up with anything? 0 Share this post Link to post Share on other sites
Thumpper 266 Posted July 31, 2008 I sent you an e mail 0 Share this post Link to post Share on other sites