Sundown Audio

Originally posted by Greg Kashin on my CACO Forum : http://www.caraudioclassifieds.org/forum/showthread.php?t=54443 ----- Sundown Audio z18 v.2 - the first and only z18 so far in the land that gave birth to the great Borat powered by a dd m3 @0.5

Is the amp available in the store? It's perfect for my application but it has no image and the description saying that it's essentially in a prototype stage.

It has come to our attention that 3 Kings Audio is selling Sundown Audio products. They are NOT authorized and products bought there will NOT carry our manufacturers warranty. All of our authorized online dealers are listed on our web-site. It is only possible for us to ensure the quality of products sold through authorized sources; do not trust an unauthorized source as you also cannot be sure of the authenticity / A-Stock quality of the product. Any dealer or distributor found to be supplying unauthorized online sources will be terminated. We would appreciate any information that anyone may have about the source of these unauthorized products.

I am replacing a 1000D with the SAZ-1500D. I already have 4 gauge power and ground run to the trunk. Will I experience significant loss by using 4 gauge? I will be running the amp at 1ohm. 4 gauge ground is about 24" long going into a ground distro block with 0 gauge grounded from the block to the chassis about 12" away. Existing 4 gauge power is about 3 feet from a distro block that has 0 gauge coming to it from the battery. I have done the big 3 with 0 gauge. Have a 200A alt as well. Lastly, will a 150A fuse be enough for the 1500D? Thanks all.

Ok, so I'm going complete Sundown in my setup. And I am excited to receive the order. However, being more business savy then with certain car audio things.... I need some community help! I had no problem actually constructing a sealed box, however these 12's need to go ported, and after trying to use a few different port calculators I am lost. We all have our areas . Can someone please design a box for me? I will post the dimensions it needs to be shortly! Thank you very much Kevin

http://gizmodo.com/gadgets/sound-system/gu...tion-315522.php Pretty cool I thought. Theres pages and pages of sites featuring it on Google. This was a pretty cool explanation though.

I'm new to Sundown equipment, and haven't owned any before. I've read so many wonderful reviews and posts by Jacob, I'm confident that the product will exceed my expectations. However, I have concerns that this will be *too big* (if that's possible). I'm considering the SAX-100.4 for my daily driver (with future uses in mind, of course). This would run my entire system, stereo for front component set (probably high-passed @ 80-100hz), and bridged rear to the sub (low-passed @ 80-100hz). The sub I have probably would hit max excursion before full output of this amp, so gain would probably be set low on the bridged channel, and low on the fronts to match. My prior exp…

I have a payment for $5 here with no notes on it. Need to know what it is for. It is from 1-28-09

Some new window candy today... Should have some vidz of my setup pretty soon.

I already tried searching the web and the forums, but I cannot seem to find a quality image of the Sundown Audio logo. Would be great if someone could supply me with the Sundown Audio logo. I prefer a vector image. Anyone care to help?

How much electrical back up do I need to run a pair strapped at 2 and 1 ohm?

Hey guys i was going to cut out some holes today and i was wondering if anyone knew the cutout diameter for a 12inch NS v1 I was thinking off hand it was something like 10.875 (7/8 = 0.875)

I got a pair of these and have a question about a box. I really want a ported box, but don't have the room. They are going in a 350Z and i still need trunk space. what do you think about a sealed box? What size would be ideal? Below is a link where i have some pics. http://www.caraudio.com/forums/enclosure-design-construction-help/574003-help-ported-box.html

Details on this please?

hi, i am going to be getting Polk Audio MM6501 speakers in a week. and i am wondering what roughly would an sax100.2 do at 3 ohms? i want to assume around 150rms since the rms doubles going from 4 ohms to 2 ohms. but wanted to ask just to be sure. thanks.

got my second amp today. woohoo! i took out he current amp pushing the XXX and will be running this one in the mean time in case if any problems come up while in warranty. since my next set-up will not take place till Feb-March it's better to test now then later.. anyways thanks much for the amp. it looks great and works just fine! now all i need is a new alt and tons of tons of sound deadener. off to watch ATHF movie and have some yellow rice and black beans.. woot!

i have a nightshade v1 15 dual 1 and a rd1750.1 that i will be running at .75 ohms i want deep clean low bass while listening to rap and rock please help me with box design specs

Hello SSA, I was pulling my woofers out to look at like I do every once in awhile since they aren't installed yet, and I noticed (not for the first time, but was reminded) that one has the cooling ring with "Sundown Audio" incribed and the other does not. (It has three holes which I assume are for the same purpose) I was wondering if that would cause problems later down the road or if it significantly affects power handling? I've been meaning to Email Jacob but haven't gotten to it, and I know that'll probably be everyone's answer but I just wanted to ask here. Thanks in advance. EDIT: A little background info. One was bought sometime in...October I think from Woofersetc.…

Okay I just put it in my new 5000 and I have two amps... Sundown SAE-1000D and SAX-100.4. Well I have two sets of RCA cables going to the 100.4, one set going from the front preouts on the 5000 to channels 1 and 2, and the other set is going from the rear preouts on the 5000 to channels 3 and 4. For some reason I'm not getting any music out of the rears. I can hear a very faint "tv snow-screen" type of sound coming out when I have my ear up to one of the speakers, but that's it. Anyone know what's going on?

Just wondering if anyone has this info I need. The 125.2 What does it put out at 8Ohms per channel. thanks

http://www.caraudioclassifieds.org/forum/sundown-audio/129896-e8-v-3-prototypes-7-26-12-a.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $75.00 Regular Price : $95.00 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU …

Okay i am running very low on space now and i have a question could i put a 1500d then bolt a board ontop of it then put another one on top the board would it cause heat issues with the bottom amp would i need to add fans or think it would be alright?

what is the cut out diameter or a sundown z 15?

When you are gonna put out the pre-order for it, is there any way you could pm me about it, i am very interested, or even pm me a price on a prototype one, im sure i could test it for you, even get you some bench test numbers.

Do you think I will need to upgrade my alternator? I have an 2006 Scion xB with a stock battery up front. I have a Kinetik 600 in back and a 3 farad cap. That feeds one sundown 1500. Also have big 3 done. I am probably going to upgrade wiring again and do two runs of 0 gauge from front to back battery and just do 0 to cap and amp. I am also looking into uprading stock battery to a kinetik also. Should I just do all of this and alternator at same time and say screw it. That way I know I have enough juice if I wanna ever upgrade to a second 1500 and second sub.