Sundown Audio

I'm currently doing up my electrical system to support my SAZ-3000D. I currently have a "200" amp alternator (E-bay special) and I'm looking into doing a 6 battery bank but I have never gone to this extreme, so I was wanting any advice as to wire or to run this type of set up. just to ensure proper charging and what not. Any advice in this field would be very very appericated. To those who are wondering why 6 batts for 1 amp, I'm planning on getting another 3000 as soon as budget allows.

ive got a optima yellow top up front a nd two n the back by my box.im fixn to order a 200 amp alternator but was wondering if i need to get a battery isolator.will that help or what.i need some feedback on this.thanks everybody

alrgiht guys need some help i had 4 hc2400 battery going in the car. well a customer came in a bought all 4 for $350 a piece will two yellow tops support both the 2 sundown 3000ds until i can get 4 hc2400s again. i get them now but there out of stock.

just thought people might want to fallow this one? http://audioforum.termpro.com/topic/28/1200.html

Here is a link to the beast in a bass race

Through them in a box I had laying around the shop yesterday. They are being powered by a pair of saz-3500s @ 0.5ohm each. Vid. Got my new box built today. It works MUCH better. Because I had to move the amps to the back of the truck my rcas weren't long enough. Using some y-splitters as a ghetto extension I was able to get one amp going. With only one saz-3500d @ 1ohm on both subs it hit a 149.1 on the TL. Did the same exact # playing some music too. More vids tomorrow.

just wondering if i could beef up a paper cone with some resin on my ten's? can someone tell me how they did it? front or back?

Question #1: I will be purchasing a Sax-125.2 within the next week, the speakers that will be playing on them are (8) Eminence Alpha-6A, four on each channel. The frequency is 85-6,000 Hz, so how would i go about setting the crossoverson the amp (confusing to me)? Do I set it at Full Pass, then change the HPF to a setting and then the LPF to a setting? Question #2: I will be purchasing a Sax-100.4 within the next week, the speakers playing on them will be (4) Eminence Alpha-6C, four on two channels(2 on each one); (4) Kicker KS20 tweeters, four on two channels(2 on each one). The frequency on Mids are 81-5,500 Hz, and the frequency on the tweeters are 4,500-21,000 Hz. So…

Anyone waiting on e-mail replies I am a bit behind Be patient! Thanks,

How do you become part of team sundown? Always wonder'd.... Of course you have to have something of sundowns to be apart, but is it jus simply that or is it more?

What power supply 12v do i need to power up Sundown 1000.1 monoblock amp

BJ from Fisher Customs contacted me about a benefit Raffle for Kyle Hicks and I decided to put in an SAE-1200D along with the enclosure and woofer that BJ put in. http://cotaforkyleh.com/ He has a rare disease known as "Epidermolysis Bullosa" otherwise known as Butterfly Syndrome. The raffle is to help pay for a bone marrow transplant for Kyle. You can visit the above site to find out more and also to make a donation.

Shannon Lee(Twisted Mayhem) Amp(s) - 4 Sundown 1500d's Sub(s) - 2 T3 TNSF 18's Modified 5 - 149.7 dB - 1st Place Jason Drinkard(Twisted Mayhem Amp(s) - 1 Sundown 3000d Sub(s) - 4 T3 TSS10's Street 2 - 149.8 dB - 1st place SPL Best of Show SPL Phat Truck SPL Phat Install Todd Mayton(Twisted Mayhem) Amp(s) 2 Sundown 1500d's Sub(s) - 4 T3 TS12's Amatuer Street 2 - 145.9 dB - 1st Place Drive-by SPL 3 - 121.9 dB - 1st Place Christy Gambrell(Twisted Mayhem) Amp(s) - 1 Sundown 1500d Sub(s) - 1 RE MT 18 Modified 1 - 143.3 dB - 1st Place TEAM HBIC Female Best of Show SPL Phat 18 Also Team Twisted Mayhem took home Team Participation Award.

Robert Wyatt Sub(s) - 12 T3 TSS 10's Amp(s) - 3 Sundown 3000's Drive-by SPL 5 - 128.5 dB - 2nd Place Todd Mayton Sub(s) - 4 T3 TS 12's Amp(s) - 2 Sundown 1500's Amateur Street 2 - 145.7 dB - 1st Place Drive-by SPL 3 - 122.9 dB - 1st Place Christy Gambrell Sub(s) - 2 True Bass Ultra 10's Amp(s) - 1 Sundown 1500 Modified 1 - 142.4 dB - 1st Place TEAM HBIC Female Loudest of the Day Shannon Lee Sub(s) - 2 T3 TNSF 18's Amp(s) - 4 Sundown 1500's Modified 5 - 149.6 dB - 1st Place SPL Loudest of the Day SPL PHAT Car Brian Meyer Sub(s) - 12 True Bass Ultra 8's Amp(s) - 2 Sundown 3000's Street 4 - 148.1 dB - 1st Place SPL Phat Truck Pictures from the event are on MECA MySpace page …

i just got my first 1500 and 100.4 today. got off the phone with an old freind and he is selling me is 2 mic tl setup for $300, might have found another d motor to turn in to another 9510. the best thing of the day drumroll please got the go ahead from the boss to get another crx. my birthday was sweet today best friday the 13th ever and i've had a few bad one's

Hey guys, Got a huge tear on my SA-8 :'( Is this repairable? if so, what glue would be the best to fix with? thanks in advance

hello i have a couple of sundown 3500's strapped @ half ohm and i was wondering what are the best rca cables i can use ?... i was sure i saw a thread about it but i cant find it .... help ?...

I just picked up some scrap 13' pvc. how can i make sure i get a good square cut?

Sorry if this is in wrong section, I'm helping someone who's getting screwed over. http://tinyurl.com/BewareOfChrislun Just trying to help this get settled.

Just wondering... Has anything more happened w/ this sub? Testing, specs, I'm not even gonna say that three letter acronym Jacob hates so much! I will be upgrading my system in about 1.5 years, and I am trying to get a head start on researching subs! Do you think you will offer the copper coil on these beasts to lower the Fs to under 30? Thanks man!

here are some pics of the event i couldnt take part since i killed the solo x while testing, because one amp gone in protection while burping a 148, maybe 2 optimas arent enough to run strapped 3ks at 0,5ohm each? waiting for the spair and gonna try it again with better batteries. it was one of the biggest car audio events in germany over 200 competitors in db drag, db cup, bass race, spl classics and AYA many broken world records in cup and drag

So a good portion of the new raw parts arrived today -- nearly a full 40' HQ truckload of soft parts and frames. Plus, of course, additional E, SA, and Z v.3 style parts! Still have more that will be arriving on our next two containers as well to complete all of the parts we need for X, Z v.4, and NS v.3 drop-ins / re-cones... will be partial containers of parts on those as many of the out-of-stock woofers will be coming in on those trucks as well (SA and SD-2 lines). I don't think very many people realize just how many raw parts we keep in stock here but this is a nice peek into that The fully built X and Z v.4 are still moving along according to the ETA in the pre-s…

Yes... that is 8 MORE amps you see behind the glass -- 16 total amps More pics after finals!

I just wanted to post a thread saying thank you to Jacob over at Sundown for some excellent customer service. It could not have gone any better. Story: A few weeks ago I started to have problems with my SAE-1200Dv1. It was mysteriously jumping in and out of protect. I tried to troubleshoot myself but could not get it working, so I sent Jacob an e-mail for some assistance. He asked me to verify my voltages with a DMM and everything checked out alright. However, the amp was still going into protect. After about a week of troubleshooting, trying to avoid an RMA, he decided it was best to just send the amp in. All I had to do was give him the invoice from where it was origina…

Who would be interested in a bigger sub than the Nightshade ? Think Shocker Sig sized motor. Triple stack 10" diameter slugs