Sundown Audio

I have done a lot of searching and can't find anything in general to the problem I am having. I am ready to pull the trigger on the pre-order of the SA-8v2, but I cannot get the enclosure figured out. I am not looking for a pure SPL, or a pure SQ enclosure. I want to be able to listen to it at normal volumes for most music, and then dial in the remote knob when the bass is pumping on certain songs. I want a small vented enclosure with 1 D4 SA-8v2. (I want a vented enclosure because I haven't heard any success stories with a sealed enclosure) I will be powering this sub with a SAX-1200D (I know it is overkill, but I want the option to add a second or a larger pair of subs…

Testing coming later... change a tad from the initial layout. We ended up with 8x IRFP360LC output FETs -- 66% of what the SAZ-3000D / 2500D have. This output section is WAY stronger than the 1500D v.1 what features IRF640 / 9640 units. Power supply features the same number of FETs as the original 1500D but a new more powerful part like the SAZ-2500D has. Power supply transformers and output inductors not changed from the v.1 1500D -- overall size down about 1.6" * Old 1500D on top and new 1500D v.2 on bottom * Internal fuses removed for SPL competition purposes - customers will need an external ANL unit * New driver board * Old driver board

Ok. I ordered a Sundown Audio SA-10 Sub. Had it hooked up to a Alpine Pdx-1.600 mono amp. Was getting this rattling/slapping noise from the sub at all volumes and all gain but of course it was less severe the lower the volume/gain but was still present. I thought maybe i could have received a bad sub so i got it exchanged. I originally ordered a dual 4 ohm and got a dual 2 ohm which was not too bad since i could still use it but the replacement i received is a dual 4ohm and does not fit in my box. The dual 2 ohm did but the dual 4ohm does not. No idea why the impedance would make a difference on depth. Got the new sub in today and it still makes this noise. I am starting …

A vote to have Jacob arrange his lines as such. Top end: Nightshade NS-4000D High end: SAZ-1000D, SAZ-2000D, SAZ-3000D "Entry" line: SAE-800D, SAE-1200D Vote yes if you like the idea, no if you don't

Original discussion topics here : Sundown SD-2 Line Photos - Car Audio Classifieds Working on 500-watt Line w/ Reduced Depth - Car Audio Classifieds ---------- ETA for these to arrive is end of September to beginning of October. As always this is subject to production and transit delays so please be certain you are willing to wait before placing a pre-order; if you have ANY doubts please wait until they are in stock and shipping to order. Pre-order policy is no refunds due to delays. To order please PAYPAL to [email protected] and specify size / quantity / coil configuration or contact your favorite online or local dealer; they can contact us for details if neces…

I decided to go through our fabled "sea of woofers" and try to get some of this stuff sold... we hired a new guy, Pedro (my cousin), and he organized it a bit to make even thinking about selling it manageable. First... the fabled sea in a somewhat organized form... I cannot get it all in one photo but you get the idea : It goes farther left and right. On the the yard sale! I am not interested in re-building ANY of these items before shipping them out due to time contstraints -- refer to a service like FixMySpeakeror your favorite custom builder for that -- I can ship directly to either if you like. * TRF Motor and Basket - $350 shipped in continental 48 states * MIN…

We did 148.6 on the first run but we didn't take a picture... got hot after a couple of burps so it went down a hair We have four 1500Ds @ 2 ohms each on it, no clue on actual power after rise - but I think it would actually sustain more on a burp. Not bad for my upcoming 1000-watt rated woofer, huh ?

You read that right guys... $750 for SAZ-3000Ds, brand new with warranty. There are no quantity discounts - that is the price each. Get them while inventory lasts!!! We decided to bring in 2009 with a bang of specials and sales Paypal me at [email protected] or talk to your favorite online or local dealer - all dealers are authorized to price match! Price in continental USA -- add $25 for Alaska or Hawaii. USA ONLY.

how would this box work with 2 SA 12s in my tacoma on a blow through... i listen to rap and rock tuned to 31. 2 cubes per sub net... roughly... gonna be running a hifonics 2000d to them.

ANY AMPLIFIER SOLD AFTER MARCH 31st 2007 NO LONGER CARRIES 0.5 OHM WARRANTY COVERAGE. Full explanation is available in this thread: http://www.soundsolutionsaudio.com/forum/i...?showtopic=7556 ---------- If you intend to run your SAZ-1500D at a 0.5 ohm nominal load please read this entire thread, especially the sections in bold near the bottom. To put it simply at the top... this is a warranty against damage NOT a guarantee that your setup will run without a hitch at 0.5 ohms all the time. I suggest that most consumers run a DCR not under 0.7 ohms for daily applications, and to reserve extremely low impedance use for competition. Read the full text for all details. ------…

A guy sent me his car to work on for a few months. I received it today and I've still got to figure out what I CAN do in it. By the time it's done, I'll be doing what I can in the trunk and redoing the door panels. The goal (if I can make it fit) is two SAZ-3500d's, a SAX-200.4, four Neo-Pro 10's and four Neo-Pro 8's.

Pre-Sale price is $350 on these until they arrive in around 4 weeks. Pre-Sale is direct from Sundown only - once they arrive the pre-sale will be over and they will be regular priced at $499 MSRP. Price is shipped in the continental 48 states, e-mail for otherwise. PAYPAL to [email protected] to order - no quantity limits! Or mail a money order / cashiers check to: Sundown Audio 151 Rebel Hill Dr Mooresville, NC 28115 If you mail a money order be sure to include a note with your name, shipping address, e-mail, and phone number. This is estimated time for delivery (4 weeks), could be more or less - but this is a great deal on these amps to those with patience! Full…

We just finished out our 4th year in business here at Sundown -- we began selling the SAZ-1500D and SAX-100.2 back in August of 2006! Thanks to all of our customers for taking us this far and we look forward to the next four years! I am pleased to announce several sale items as well as several pre-orders opening up. To order any of the below items please PAYPAL us at [email protected] along with an order list (be specific) -- be SURE to have your address on the payment! You can also order from your favorite local or online dealer -- all dealers have the option to provide these sale and pre-order prices as well. This sale is for the USA ONLY!!! Prices below are sh…

Hi, how would someone go about becoming sponsored by Sundown Audio? I have a 2002 Nissan Sentra XE and would love to run a Sundown SAZ-3000D with my Fi Audio 15" BTL. If you would like to see my setup please check out my page on CarStereo.com. http://www.carstereo.com/rwussow Any help with this matter would be awesome. Thank you for your time and I look forward to hearing back from you.

SAX-1200D : Sold out - more due in 3-4 weeks. SAZ-1500D v.2 : Sold out - ETA pending. SAZ-4500D : Sold out and discontinued. We have opted to cease production on the 4500D now that stock is depleted. ANNOUNCEMENT : The 4500D is stepping down as our flag-ship amplifier to be replaced by a new, more powerful unit... the "NS-1" -- more details to follow.

Now you can do just about anything with it! A little SAX-100.4 history: SAX-100.4 -- Original model SAX-100.4B -- Updated crossover ranges SAX-100.4C -- Upgraded from 50-amp to 70-amp power supply transistors SAX-100.4D -- This is the newest model ----- The following functionality will be had with the crossovers: ALL CHANNELS: Subsonic @ 10 Hz - 500 Hz (always on, can be used as the HPF for a band-pass setup in conjunction with the LPF) HPF @ 50 Hz - 500 Hz w/ x10 button (selectable 12dB / 24dB slope) LPF @ 50 Hz - 500 Hz w/ x10 button (selectable 12dB / 24dB slope) ----- So, what will you be able to do with the new model that you couldn't do before ? 1) You can bridge th…

I came in yesterday and built this bad boy... a customer had ONE unit on order for a bit and I got a pair of the Aluminum sleeves as samples so I am building this one and one other one this week (both with fat 8-layer coils and are single sub orders). These also don't call for any Gap ID sleeves as they use the fat coil -- so I have enough parts to make them :thumbsup: ----- * Collecting the parts up. * You can see the black coated aluminum pole sleeve in place on the pole but not Gap ID sleeve -- so the overall gap is still pretty massive. The "fat" coil fills it up nicely, though. * Starting the rear glue joint * Rear glue joint completed * Prototype "XL…

Updates : 1) Double sided PCB board (v.1 was single sided) 2) More primary input caps 3) Large brass bars for power supply current 4) Revised layout 5) Superior Soldering and assembly quality Same power as the existing 1200D but overall higher quality throughout based on what we learned from the v.1 model. Who would be interested in a pre-sale at, say, around $250 These amps are capable of 1500+ watts.

http://www.sundownaudio.com/rides.html Jacob has decided to give me the go ahead to take over the rides section on the sundown website. What this means is basically the page will be updated in a very short turn around from the time pics and stats are submitted. IF you want your spot on the sundown web page just submit the following. Stats ------------------------------ Name: Sponsors: Processing: Front Stage: Rear Stage: Amplifiers: Subwoofer(s): Enclosure: Other Equipment: Vehicle Mod's: ------------------------------ Pics. As many as you got! Video: Link to your video as well. send all requests to [email protected]

Alright.. There is a huge hype on the sa-8's.. badass speakers ive heard.. is the other SA speakers comparable? .. hope that makes sense.. what im asking is would the sa-8 sound better than the 10 or 12? they are all reasonably priced, but if the 8 sounds so damn good can i expect the same from the 12? I know the nightshade is a beast.. thats not in question.

I've talked to him alot about this setup... putting the rear deck back in, metal and all (it bolts in an out), has only a few tenths effect on the score so this is a REAL trunk build. It has done as much as 153.1 dB to date -- on the dash. And 152s at the head-rest... in the 40-44 Hz region. Scores done with seats locked in the upright position. SAZ-4500D is wired to 1 ohm. I'll get him to send me some pictures of the scores when his internet is back up -- and videos too. They are stock SA-12s straight out of the factory box. No modifications to them.

Well, I hurried home from school today due to UPS predicting there was going to be an 18 pound package on my doorstep addressed to me, and there was! I present to you the Sundown Audio SAX-100.4: And the beautiful Crossovers: The Input/output: Everyone loves amp guts!

I've had my dealers asking me for years for a shallow component set so I started on one... here are some sneak peeks of the first sample set. We are testing them in Nick's car since he is a big SQ guy They are VERY shallow and will fit in any application I can imagine. For a driver this shallow excursion is not bad; obviously not a super high throw driver but crossover over steeply at 80 Hz will do nicely. So far we've tested the mid and we are very pleased for the depth and cost... Overall set price would be under $200 from an authorized dealer.

So... who would do it ? Lets say if this amp was a full 1 dB louder than even the SAZ-3500D on 12v @ 1 ohm... and the 3500D was already 1 dB louder than the 3000D. Maybe it's already been in testing for a while So we are talking ~2dB gain from the SAZ-3000D on this bad boy. Pre-Order price would be around $1200 or so shipped. Lets see a show of hands.

We got the first prototype in here to test and I LOVE IT !!! Cannot wait to get rolling with this project They should cost $130 MAP from an authorized dealer. * With Blackberry Z-10