Sundown Audio

Can a SAX100.4 handle an 8v input. The deck I plan on using is an Eclipse CD5000. I just want to make sure so I don't burn the inputs on the amp.

What kind of power does the 100.4 make per channel at 8 ohms?

Hello I was wanting to use the 100.4 for my front stage. I was going to run 6.5 in the kicks and maybe a 3 or 4 inch in my front pillars. I was wondering can you bandpass, for example channel's 3&4 with the subsonic filter set at 150 hz then setting the Low pass frequency crossover at 4,500Hz for the 6.5. Then channels 1&2 would be set on High Pass and the High Pass Crossover set at 750Hz for my pillars. I will also be running tweeters I will be running those on channels 1&2 also. How could I Passively crossover these. I was thinking around around 7,000-8,000Hz any info would be helpful. Thanks

So today i noticed something interesting regarding my SAX100.4. I am currently running no subs (waiting for my saz2500(2) to come in) so my setup is the big 3, h/o, 2-nsb90, 2-zapco RB13.2 comps and the 100.4 so let me see if i can explain this issue correctly... here is my door panels for starters so i currently have all 4 channels in use and the crossover point is 80hz channel 1/2 - is 1 set of gains and filters (hpf) channel 3/4 - is another set of gains and filters (hpf) i am at the 1x range and hpf on channel 1/2 i have the gain set to 1/4 of the way up (just positioning i am not a noob it is for reference sakes) to match the output of 1/2 i have to set 3/4 gain…

can someone explain this to me in simple terms of how it works? I'm trying to understand how it works but am giving myself a headache. I want this amp to power 2 fronts, 2 rears and 2 "show off" external speakers. Now, by doing a standard wiring job, all 4 in car speakers @4ohm would be receiving as advertised 100w per speaker. I set all the x-overs on the amp the way i want them to be. I then decide to hookup these 2 extra speakers in tri mode by bridging each of the 2 speakers on ch1+2 and ch3+4. This is where i get lost... If the original speakers were receiving 100w before, what are they getting now including the add-on speakers? The amp is rated for 320x2 @4ohm... …

so after playing it for 15 mins it makes a high pitch noise and then shuts off noise is not coming from subs you can turn volume down to zero and still hear it . have good eletrical to it 13.8 volts big three done with second batery ohm level is 1.3 checked grounds and removed subs from box all connections good only had it in car for a month now, i put my old amp in and works fine

Will both these amps work on 15+ Volts right out of the box? Thanks,

Just wondering... How come this amplifier isn't listed on the Sundown website? At least I cannot find it... Maybe I'm too drunk to notice but it seems like it is missing...

Anyway to go around clipping feat on sundown sax 200.4 Volume 25 then cuts off

When can we be expecting the SAX 250.2 and what type of power would it do? .......rms X 2 @ 4ohm and rms X 2 @ 2ohm? and at what fuse rating?

like the title says im interested in the SAX 50.2 i believe u working on some protos at one point. just wondering how these are coming along.

I'm wanting to run my tweets active with this amp but can't find it anywhere. I know it was discontinued but I'm hoping I might be able to find it somewhere. Anyone know if they still have any of these available anywhere?

I want to run 4 infinity kappa 6.5 2 way. What is the best starting point on the crossover? Set both crossovers at full? I am new to all this and have searched and searched but it seems most people are using this amp for componets. It will be ran off a Alpine cda 9886 which they advertise has a high pass crossover bilt into it for the front and rear preamp outputs. Will this amp do what I need it to do? The moer I read the more nervous I get that i made the wrong choice. Thankyou.

Would running the SAX amps at 2 Ohms potentially hurt the amps in the long run like other amps? Im looking to run a sundown to a set of Infinity 680.7cs speakers. Anyone every use these amps as well?

For the month of March our SAX multi-channel amps are on special ! SAX-125.2 : Regular - $250 MAP SALE - $205 SAX-100.4 : Regular - $385 MAP SALE - $345 SAX-200.4 : Regular - $815 MAP SALE - $650 You can order from your favorite local or online dealer OR you can Paypal me at [email protected] to order. This is for the month of March only and in the USA only. For Alaska and Hawaii SH quotes e-mail me -- otherwise the above are shipped in the continental 48 states.

Hello Does the SAX100.4D is 12.5V tested or 14.4V tested ? Does It have different power and THD voltage test ? I'd like to have a sure answer. Thank you

Just wondering about some power testing results for the SAX series amplifiers. Anyone ever test these to see what they really pushin? Also, I wouldn't mind picking up some equipment to do my own power testing, what would I need to do this?

Does the new heatsink on the sax-100.2 look the same as the SAE-1200D? Just curious because I thought it would be all black but the one I got today from db-r wasn't.

I've had this amp for about a month now and yesterday as I was driving around I lost power to the front speakers. I thought nothing of it just thinking that the power wire may have slipped out. So when I got home I checked and the power wire is in, all the fuses are fine and there is power flowing through the power wire. The remote wire is also in and has power flowing through it. The amp does not turn on or go into protect. Not sure what else this could be.

As the title says, do the new SAX-100.2's have the new heatsink on them yet? I'm wondering because I already have a SAZ-1500D and a SAX-100.4 with the new heatsink and would like a matching SAX-100.2 to go with them.

I checked all wires, rca's, all speakers work on all 3 other channels but channel 4 just has his sound in it. Changed rca's, same thing, how much to send in and get it fixed? thanks

how many Amps (electrically speaking) do i need to play a sax100.4 at a decent level? and how about at 100.2? thanks.

If i was to be running re audio components all around would the SAX-100.4 be able to power up those speakers pretty good?

So I saw that SSA is out of stock of the 100.4's I'm looking to grab up a pair of 3000d's and a 100.4 from them Just wondering if/when they are expected thanks

I've been kinda rethinking the whole larger setup that I had planned. Would a SAX-100.4 be suited to two AQ SD2.5-15s in a horn? AudioQue SD2.5 series The subs are D4. I'm still waiting on a shipping quote from AQ..