Sundown Audio

i got this sundown audio E8 with coil rub and i was wanting to know if sundown made a recone and if they do how much?

Wondering what the power outputs are for these? Looked in the store but didnt see them there

Had a good time at the USACI show today in Tyler had some really nice rides and set ups here are some pictures. And My Truck SB4 - 151.4 1st run and 153.6 2nd run with port plug in tuned to 36 hz

Well since I always see so much talk about new sundown products, figured I might as well throw out the possibility of full-range coax and or component speakers. I would def. be more interested in the component speakers, especially if individual drivers designed for active or custom built passive x-overs.

New Warranty policy stipulations effective as of 10-2-2008 within the USA: 1) If your amplifier has a blown power supply or damage from excessive vibration there will be a charge for a warranty replacement within the 2-year policy: * SAZ-1500D and smaller amplifiers (or any future model under 2000 watts) - $30 in the continental USA (AK and HI add $15) * SAZ-2000D and SAZ-3000D (or any future model 2000 - 3000 watts) - $50 in the continental USA (AK and HI add $20) 2) If there is no obvious sign of either of the above the warranty replacement within the 2-year policy will remain a free replacement. 3) For either free replacement or flat-rate charge replacement the amplifi…

Hey everyone...im getting 3 saz 3000 d's and it says that the 300 amp inline fuse is not included....where do i buy it at? ThNks, Freddy

I'm working my way through building my system and I'm starting to think I might not want to go with the 2 Kinetik HC2400's I was originally going to put in the trunk due to space restrictions. I have a Kinetik HC1800 under the hood, DCPowerinc 250a alt with 14.6/15.6 switchable MLA installed. I need enough juice to power 3 SAX-100.4D amps at 4ohms and 1 SAZ-3000D at 1ohm. So, keeping the power under the hood the same, would it be ok instead of 2 HC2400's in the trunk to go with the smaller HC600's (maybe 4 or 6 of them)? I could easily fit those anywhere and still have some cargo area left over.

port is 8" with a 3" flare. the bottom peice is going to be the back of my box.I still need to do some rounding and bondo but you see the picture's

I need me a couple

I am just checking if you got my PM, I have seen you on, but not sure if you just missed it or are ignoring me. BTW, I dont think you are ignoring me!

so, my luck follows through. This small tear not even all the way through on my surround foam got worse. This is by the way a 12 in sundown nightshade. The surround foam is positivly going to need replaced. My question is..Am I going to need a complete recone or can I just get the foam replaced. thanks Jordan

the ssa store says 1lbs, but that seems a bit heavy... Just kidding but seriously how much they weigh?

Hey guys I have some fast questions to ask!! 1. Lets say I used 8 gauge from amp to sub box terminals, then 2-12gauge runs from terminals to subs(yes 2 subs)? What I want to do is run 8awg from the amp to the terminals then from there 2 runs of 12gauge, 1 run per sub. I think this will work b/c 8awg can support 75amps and 12gauge can support 40amps (since 2 runs40x2=80amps) since there is 2 runs which will be hooked in parellel and in parellel we know current divides up I should be okay? but wait in parrel each run will see the same voltage of... o well input is needed here lol! the currnet which the 8gauge will see will be a peak of 50amps. I ask b/c i have a ton of 1…

SA-8s are back in stock. * This run has the new surround tooling. * New spider not implemented yet -- will be available on the November-December run. SA-10 D2 are back in stock. * This run has the magnet boots. * New spacer ring / pole cap will be available on the November-December run.

Hey guys, We are back-logged for a bit on woofer building here. The Z v.2 shipment landed last week and we have been SLAMMED ever since. We also sold the last stack of BM 10s to a customer and have been working to get those out to him. So... expect a bit longer lead time to get a sub if you order one we have to build. I plan to work late this week to catch up as fast as possible.

Originally posted on SMD by Drugban : Mitsubishi Pajero TeamSundown Russia - SMD Forum ----- 1 option box 260 liter two ports 160 mm frequency 30 hz 2x Saz 3500d bridge 1.33 omh X 26 hz....... 30 hz....... 35 hz........ 38 hz...... 41 hz.... 43 hz..... 45 hz.... workout video music 2 option box 220 liters two ports 160 mm one saz 3500d 1.33 omh frequency 34 hz

The remote gain control for the SAZ 1500D. The cable that connects to the amp. Is it special or can I use any cable with RJ11 ends?

Corey Mitchell 1 Sundown 1500D and one 12" Nightshade @ 34Hz 1st place Drive-By 1 with a 118.6 (40 amps of fusing) 1st place in Street 1 with a 142.9 (40 amps of fusing) Jeremy McCord 2 Sundown 3000Ds and three 15" Nightshades @ 43Hz 1st place in Drive-By 4 with a 129.7 (320 amps of fusing) 1st place in MOD 3 with a 151.4 (145 amps of fusing) Drive-By Best of Show Josh Newton 4 Sundown 1500Ds and 8 15" MA Audio XLs @ 31Hz 1st place in MOD 4 with a 155.1 (240 amps of fusing) 1st place in Drive-By 5 with a 127.0 (no fusing) SPL Best of Show Derek Jackson 2 Sundown 1500Ds and two 12" Nightshades @ 50Hz 1st place in Street 2 with a 149.8 (60 amps of fusing) 2nd place in Drive…

ok, so i've got a saz1500d, i'm going to get a chevy impala 00-04, i gave the gf the type r 12"s i originally had in my lincoln towncar, i'm thinking single 15" for the next set-up so i can give it the box space it needs. would a single nightshade 15" w/1500 rms in an optimal vented and tuned enclosure put me in the mid to high 140's?

I have a saz3500 that i bought with my z v2 15's and i was wondering whats the difference in the models

1 9510 + 1 1500= 145 on the tl my ( wife's) car is the eclipse with the 1 10 in it. took third for the day out of 26. sorry for the bad pic's but the 1500 was on the other side of the box. oh and I'm the guy with the red goat. i was hoping to have a rex by next weekend but might not happen. but will have my 6" aero's and part's for my 2 9510's (recone's and basket) and monday i get my second 1500 back. so if i run the wife's car agian it might do a 148-149 hopfully. anyways here are the pics http://www.termpro.com/asp/members2.asp?Wh...9249&Page=3

so im buying two e8s from a friend for 50 dollars but the tinsel leads are messed up. how much to get them fixed? they guy im buying them from talked to jacob and he said he would do for free just to pay for shipping but i was wondering if i could get a quote. idk if you guys are still going to cover them after so long of them not being fixed.

i have one of my 100.4 bridged on my mid-bass my question is if i hook up the remote gain will it only change 1 side {ch 3/4} or will it change both sides {ch 1/2 and ch3/4} ? i think only ch 3/4 will be changed.

Anyone have the sundown logo in vector format, such as .eps or .ai? Would really like to cut my own decals in the color I use for my car and I could retrace it but that would take a bit of time

I received my 100.4 and i must say amazing customer service and extremely fast shipping. I am going to run active with Supremo Tweeters and SEA mids. From people's experience should i use the filters from my pioneer 9800 head unit or from the amp?