Sound Solutions Audio (SSA®)

We slapped my old crx/suv (shop box) style box in Sound=Vibrations car to see what it would meter. With under powered subs @ 34 hz it did a 142.7. Congrats Ernie!

UPS dropped off a little somethin' somethin': First impressions. I didn't have much time to play around with it (gotta go to work soon), so I was pretty careful with the settings. Still, this thing is amazing. Gets loud and LOW. Hopefully I'll get some more work done this weekend (moving bass knob and replacing the crappy cable) and get it tuned a little better, but so far I'm extremely happy with my purchase. SSA's got a customer for life.

I've got a 91 crx dx and I've been withoutbass for a while taxes are in and I'm ready to purchase some subs. I'm not set on what I want yet I have 2 15 icons. I've had many ideas and my spending limit on a sub, or subs but I need help deciding. I don't have a amp yet I want to get a 1 ohm stable amp for the subs or sub but what coils would i g3t? Any other sub ideas throw them at me and if you can answer my questions please do! I'd like to get sponsered but dont know what it takes

can they be used in a sealed box? if so do they have good sound quality? would one 10 beable to handle the power from a kicker zx1000.1 with a birthsheet of 1156w?

Hello everybody, I made up my mind : I really want to buy the 15" SSA Icon sub. I receive a few messages of AAron, but I am still waiting with my money burning my pockets :bigclap: I cannot order from the website because of the shipping info needed. What a pitty I know it will take a long time to be shipped over here in the Carribeans, but I want it, and that's it !!! I already know what kinf of enclosure I will build : a simple 3 cu feet sealed enclosure. I would like to try it ported, but it needs more room, and I don't want to go over 3 cu ft. If you have somme advices, I take everything! Don't worry!

Vote fools!

Test tone at 38hz on music, peaked at 44hz. Scores on the left are sealed on the dash and scores on the right are meca (meter was on a stand on the passenger seat) I was pretty happy with no tuning at all really. Wasn't really looking to max out the db's, just wanted a base to test the sp4's against when they come in.

A new side project we have had going for a few months now on the side. At this time, they will only come in our SSA Testarossa red and come fully loaded options wise, as these are meant to be premium units. They have Japanese Koyo bearings for super long life, as well as 6 phase hairpin stators. Some will have billet cases, all will have a machined pulley cover. As of now, the SSA Testarossa's have been selling via word of mouth and at a killer intro period pricing. The first SSA Testarossa is in our family RX330 and has been going really strong since day one. 370 amps. Here are two of the first 25 models:

I was wondering why the Xcon is able to have such a high BL despite only having a single magnet slug?

Ok, gettin a little worried about all the warnings I have recieved that the HDC3s don't get low and have a funny hollow sound to them. Just sayin, if more then 3 people tell you that you look like a jackass, you might want to take a look in the mirror, lol. So, I am really liking the Xcon 12 D2. Plays low, sounds great, and is a sexy driver to boot. Question is, do you think a Xcon 12 D2 and a Audiopipe AP18001D would be a good match. I know what alot of people will say about AP, but I know they are solid amps that do rated power. Lookin at a box 2.2^3 net tuned at 32Hz. I listen to mostly rap, but also do some oldies like Al Green and a little rock. I want a low and loud…

I compete in MECA and went to my first comp. today with the xcon's. Did my personal best of a 151.1@40hz Also did a 127.6 in park and pound....mic outside the vehicle 6 feet away. These subs not only sound awesome but can get pretty loud too. Did 3 p&p runs back to back (30seconds full tilt) and the subs handled it fine, didn't get warm or smelly setup is 2 15" xcons's on a crescendo 3500

I bought an SSA Icon 10 from my son a while back. My son is SQJEEP here. We got around to building the box for it. We used the box design in the tech section. Fantastic box design....We built it exactly to the design and holy shit this thing pounds. We did the 1.35 cubes. It's not finished yet but here are some pics.It's running off a Zed built Usacoustics USA 2150 bridged and rated at 500 watts. Please note....The panel sticking up in the back is the amp rack and it is going to be replaced. It's the old one and it's just in there temporarily. Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01

a dcon or gcon for a small sealed enclosure? I was extremely happy wit my dcon10 and want to go small again. Since I dotn have a sub amp yet Im also flexible on how much power I need to run although I have liek a 300 watts amp that might be a nice fit for a dcon.

so ive gotten into the competition side of thing theres a comp coming up in my area on the 27th and im trying to improve my score a little bit from the last comp i went to when i still had my 18" Q in a 7.4^3ft box tuned to 30hz with sub up and port driver side(slot port) i was doing 136-137's on music. so this is where im at now i sold the Q cause i was in a bad spot, and i have two custom icons that i purchased from trevor(p.t.s) a coulpe of months ago. i have them in a obcon gz series box ....link:http://www.rtboxes.com/gz-series-gz328-10/..... 1.42^3ft per chamber tuned to god knows what(i know its prefab but its a nice box) it sounds good but i know the icons can do …

just a couple of SSA's from my personal collection icon 15 next to a Zcon 15

I'm planning on ordering two 15" Icons in the next few days and I was just wondering what you guys think I should power them with? Would one SAZ-1500D be underpowering them? It'll be a ported box... Thanks!

I have had my eyes on ssa's woofers for quite a while and think i'm finally about to purchase my next sub(s). I have always wanted to try out the Icon but have recently seen a video on youtube of a single dcon 10" that was very impressive. I've been looking at the new combo deals with the sundown amps on ssa's store and like the prices. I have never heard an ssa woofer in person and would like some opinions from those with experience and knowledge of their products. Heck, I might even try the 15" icon (sealed); the 12"icon or 10"dcons would be p…

the car the box design from sound=vibration thanks but it was too big trimmed down about 2inches and added it to the back making bigger cutouts to fit lanzar optidrive mids w/ tweets box couldnt fit with my altima mat! amp mounted w/ battery holder all knukonceptz 0ga wires, terminals, krystal kable RCAs, except a little 4ga monster cables

i have a 2005 civic 4 door. 1kw to play with and enough space for 4 cubes in the trunk. i just bought a icon 12 and want to make up an enclosure for it. i want it to be loud to the ears and still sound good and flat. what would you guys recommend?

Newb here. Looking for some input from the more knowledgeable. So i can conclude on amplifier choice. Desiring to put a Gcon 15 sealed in the trunk of my Jetta. I have approximately 2.88cuft to work with. So now my question is; what rms power would be better for daily use 820 or 930? I listen to mainly hip hop and electronic types of music. Occasional rock and jazz. Please let me know if any other info needed and thanks for your help. Mark

Im upgrading from 2 12's on 1300wts tuned to 32hz to 2 15's xcons on 3500wts tuned to 30hz. Of course the xcons will be loader and sound great,but i've never ran subs in a box tuned that low.am I going to notice a diff in the upper range? My front comps play pretty well down low have them crossed hfp at 63hz.Just want to know what to expect.I play a lot of rap,and r/b some rock.

Check out the all new Demon 550W Subwoofers by SSA®!! Some slow motion excursion to show off the super effecient Demon suspension, while providing some amazing sound quality for your budget friendly projects. Featuring a 2.5" copper coil, Aluminum former, Aluminum Shorting ring, Solid pole, non-vented bumped back plate, Large single slug motor, Pressed pulp cone, Tall roll surround, Push terminals, Dual Nomex progressive spiders, Stitched tinsel leads, Large dome dustcap & more. #ArriveLoud https://store.soundsolutionsaudio.com/subwoofers/soundsolutionsaudio/demon/

here's a shoot of one of my doors I just finished!! First ever Customization. Might fiberglass in near future if I buy another set of the Cadence Mids

I made up my mind!!! and it's the Xcon.Since the xcon been on parole I can't stop drooling, 31 mm Xmax damn!!!! I will like to know the min. and optimal cu. ft 12''s and 15'' ported????