Sound Solutions Audio (SSA®)

Going for a new mid highs setup!! Taking out the ken woods. I have two SSA Icon 15s for my lows. Looking for 2 6.5s and 4 6x9s... And I'll maybe keep my crescendo super tweeters. Any suggestions?? What would yall put in y'alls ride if you had a price limit of 250 for each. (I want to hear about y'alls goals) saying you had two 15 icons!!

I was looking at DCON box plans on the SSA technical section. They list the optimal single DCON 12 ported at 2.25 cu ft with 32.5 sq in of port. Then the dual DCON optimal is listed at 3.28 cu ft with 45 sq in of port. I was looking at running three DCON 12's sealed in the trunk of my Eldorado with the optimal 1.25 net per sub to save space. Well after looking at the optimal ported box for 2 12's I'm wondering what the optimal for 3 12's ported would be. My max box width is 38", max height 15" and depth up to 24". I'm thinking I'll run the 12's side by side with a slot port on the top of the box 2" tall and 36.5" wide firing towards the back of the car. With a net box siz…

Heard on facebook there was a delay on some subwoofer parts, I think this has affected the xcon availability? If so, when will the D1s come back in stock? I will be ordering 2 very soon. Thanks

Or should I just go with two xcons or maybe even a zcon if they ever decide to release it.

Forgive me if this is a redundant question but I am curious what is the minimum mounting depth I can get away with for an ICON 12" sub? I know the optimal sealed is 1.35 cu ft and the minimum depth is 6.5". Provided I can get my cu in length what is the minimum depth I can have for my enclosure? Can it be 6.5" in depth? Cheers K

After our monthly crew meeting at work one of my coworkers was driving in front on me. We both ended up at the same bank and he came up laughing at me. I asked him what was up and he said he could feel my bass on his back in his truck while driving in front of me. Thought that was pretty funny with 2 15" xcons sealed.

What's up guys. Looking to do this install in my 2000 Dodge Intrepid. Having figured out the exact box demensions but looking at somewhere around 2.2 cubes @ 32hz. What are you guys opinions and suggestions? Anything is appreciated! Thanks.

Hey what's up SSA family, I'm new to the Ssa subs, but wanted to try them out!! Heard a lot of good things about them. I know you guys are thinking it will be a tight fit, and I'm ready for the challenge. Just wanting to get some input on what amp I should go with? All opinions accepted!! Will do build log!!

First of all I want to apologize because this post is LONG overdue, but finally it is here. I have been enjoying this setup since the summer, but thought I was going to be going to get something else installed and so I was waiting to make this thread until I did, but I have not found anytime and its not really a priority in my life right now to finish this... I'm satisfied for now and probably over christmas break will finish.... So I purchased (4) SoundSolution Audio Dcons in the 10" size and a Sundown 1000D. I had a custom box built but due to having to put it in my trunk, I had to decrease the size... the box was designed by Shizzon (thank you immensely) and built by F…

Whats a good amp to power two xcon 15's i can get two saz-1500 used for $350 or one saz-3500. Should i get the d1 or d2's?

I've got a 91 crx dx and I've been withoutbass for a while taxes are in and I'm ready to purchase some subs. I'm not set on what I want yet I have 2 15 icons. I've had many ideas and my spending limit on a sub, or subs but I need help deciding. I don't have a amp yet I want to get a 1 ohm stable amp for the subs or sub but what coils would i g3t? Any other sub ideas throw them at me and if you can answer my questions please do! I'd like to get sponsered but dont know what it takes

Hey everyone, I have changed my mind many times about my build that I will be doing in the future. I think I have finally decided for sure on what sub and amp I am going to run. My choice being a single 12" Xcon in a enclosure that seals off the trunk with the sub firing into the cabin. It will be powered by the new Megalith Zed Monoblock. My question is... Should I worry about much reinforcement in my enclosure with only a single 12" thats a lot of power compared to most retail subs that I have worked with in the past. Also, I want to run a ported enclosure, what would the optimal tuning be for electronica music? 32hz? 34hz maybe? Also if I'm running this Should…

Can someone give the number to ssa so I can place my order for my subs..the number on the site is not working and pay pal is acting up

I have room for either one. Amp is an ED Nine.1 (1200 @ 1 ohm). My music preference is rap and I like deep bass and SPL. I'm sure either setup will satisfy my SQ requirements. Car is a 2005 Mustang. Very small trunk. Thank you

Wondering when the Icon 10's will be back in stock and possibly with the new dust cap??

I just purchased some SSA ICON 15s (2) for $90!! Their not the 2010 version, but still, that's a steal!! Right?

Which one would you guys go with? The pioneer flip out or kenwood flipout? I've used the kenwood, and may buy today. Need opinions on how fast compared they are. Features don't matter, only backup cam and variation of eq setting.

Last night i got my xcon installed by ernie from ssa and dam thats gotta be the best woofer i have ever heard....

Has anyone heard anything about their amps? Their pretty huge!! http://www.massiveaudio.com/store/product.php?productid=16164&cat=277&page=1

We have been keeping it pretty active with some of the day to day type of things. It is also a great way to find out any little news. Link: SSA Facebook

Do you guys think the icons sound better in sealed or ported box? Being that the sq, and power are neutral.

Currently I'm running a 10" Icon in a 1.5 cube box at 32hz with 1000-1200rms. Is there much of a difference if I used a smaller box such as 1-1.35 cubes with the same tuning?

SSA Punisher? Whats up with these?

I am planning on purchasing 2 dcon 10's to replace my current fi bl 15" but i am not sure what to get. ill be running them on my saz-1000d and im not sure if they could take the power at 1 ohm or should i play it safe at 2 ohms?

ANYONE, want to see this video?