Sound Solutions Audio (SSA®)

Was having a box built by iamamp3pimp for my AA Chaos 15D2 to run off my AP15001D, but had some cash flow issues and had to sell the sub. Box is halfway built. Will be 2.8^3 tuned to 35Hz with a kerf port. It is a copy of the design that was used for my last Chaos 15" with the tunning bumped up from 30 to 35Hz. Here is a pick of the first box, only difference is port tunning and the new box will be raw birch that will be stained Cherrywood in the future. You guys think the Icon will be good in this box off 1500 rms? On a side note, Mark, would it cost xtra to get the full Xcon dustcover ike LoudGeo has on his Icons in the Punisher?

can you turn a 12 inch icon into a 18?

im thinking about adding another xcon 12 and another ed nine.1 im just worried about space if i did it i would want to go ported but i dont know how it would fit seeing as how my 1 12inch xcon takes up a good amount of space in its ported box. maybe seal them up? i just dont want to lose output. what do you guys think of 2 xcons sealed up on 2 ed nine.1's? if i do this they will be going in an 07 ford fusion not in the 02 chevy malibu i have my xcon in now. Thanks guys in advance p.s the xcon is by far the best sounding sub i have ever owned. its starting to break in and get lowder and clearer haha adding another is going to be insane hehehe

Any idea when the DCON 8" woofers will be available. Looking to sell my IDQ12 and pick up four 8's instead

Will the Audioque 1200D at 4 ohms be too much power for (1) Dcon 12

hi there, i'm getting a pair of 15inch xcon pretty soon and i'm working on my box design. They'll go in an 2004 elantra gt, so hatchback. subs up, port on one side (a 10inch sonotube) with enough clearance to breath. amp is an mtx te4001d, so around 4k watt to the pair. -what's the subs displacement? -cutout -is one 10inch sono enough (box is 7.2 before all displacement, so pretty on the small size) gives around 12f -how do you think they'll react in like like 3.2-3.5 feet each? (3.5 if single baffle, otherwise 3.2) -i had tc sound's tc-9 prior, anyone know how does compare? -anything i should know about these beside that? thanks for the help in advance

Hi- I'm trying to design my box for the Xcon's I am going to purchase soon. I have 13.58 cubic feet gross to work with in my trunk. Problem is, I want to do forward firing sealed off from the trunk and the opening behind the seats is not big enough to accommodate the port. The opening is 35" long and 20" tall. I can't fit a large enough port to be effective. I am considering porting through the rear deck with 6" aeros or something (maybe some huge slot port through the rear deck?), would this be effective? I'm assuming I could still seal all around the ports and have it sound good. My other options are, sealed 15's, sealed 18's (that'd be cool, but idk), or ported 12's. I…

Hello, I want to tell you my feeling after changing my sub enclosure. Some people are afraid of going sealed with the Xcons, and want advices. I had a 3.5 ft3 sub box, tuned to 32 Hz. Design was made by Fisher Customs (need the new ones JBL Camry, please). My car is a hatchback car, and I had the sub and port facing up. I loved it, but I could not put a bottle of water (or whatever) in the trunk, and the amps were not breathing right : no room at all. I made a friend (he has an Xcon 15" too) build a sealed box for me : dim are (70 x 40 x 40 cm), so 27.6" x 15.7" x 15.7 ". I think they fit in the ones provided by ssa. I have a lot more room in the trunk and I like that !…

15" Icon recone How much am i lookin at? Being reconed from the 2007ish version

Ok I have been beating my head against a wall trying to decide on which driver to run. My initial thought was to run a pair IDMAX 12's. However, I have some reservations on doing pretty much the same thing I have done time and again. So with that in mind I have been pursuing large displacement drivers. I need something that will work in a sealed enclosure, which the xcons seem to be fairly close with an EBP around the level that would work well in this setup. I will be powering this subwoofer with a mmats 2000.1 so it should see around its rms rating, granted box rise ect you won't see close to it, but that's ok. Alright so here are a couple of questions for you is this …

So I drove to Sumter today and met up with Master Yoda for the test and tune. This was my first try on any meter and I really had no idea what to expect. I was kinda worried I might get over there and embarrass myself being a virgin and all. Here are the results 148.55 @ 36hz sealed legal 146.10 @ 40hz Average on music 148.67 @ 36hz Peak music I am always pretty conservative with my gains and noticed zero clipping on the TL meter and also got some suggestions to help improve on this. Yoda is putting this on again in 2 weeks and I am curious to see what I can do with a little tweaking and maybe a little turn of the gain. Not too bad for a first time rookie running SQ sub…

better video than the first but still not that great. Put it up on youtube this time. Sub is wired to 1 ohm and gets dumb loud off of the ed nine.1 but you cant really tell in the video. When i get a good video camera ill take some quality shots but for now this will have to do. Still havent fixed the screws... ill do that today though. enjoy

wow just wow... i was told that i should wire it up to 4 ohms and let it run for a week to break it in so i did that and i thought it wouldnt sound too good until i wired tto the full 1 ohm but man was i wrong. im running an ed nine.1 and its wired to 4 ohm so the sub is probbly getting about 500-600 watts and it still sonds amazing. can only imagine how the whole 1300 will sound. Couldnt get any vids today but i will tomorrow. 1 question though. should i leave it wired to 4 ohms to brea in or will i be fine wiring it up to 1 ohm and letting it break in that way?

heres a short video of my new set up. The sub is still extremely stiff and needs to get broken in but it still wangs pretty good. Its wired to 1 ohm and playing hypnotize my young jeezy. video really does the set up no justice though. i took it with my camera phone so you cant really see all of the excursion or hear how loud and clear this thing really is but i promised a video today so here it is. im off to work now so enjoy. feel free to leave comments good or bad. oh yea and you can see the spare tire because i pushed the box farther back in the trunk an the thing that was covering it moved back a little but i covered it up again haha so my trunk doesnt always look lik…

where can i get stickers i can put on my car?

i got a type r 10 right now and i was thinking about getting a dcon 12 next. would the dcon be louder than my type r?

my xcon 12 is here

just keep getting treats in the mail ed nine.1 came today and look it already found a friend haha. install starts wednesday hopefully when box comes

I was just wondering what the difference is between the small enclosure size recommendation and the optimal size recommendation for the SSA subs? How is output affected by going with the optimal size vs the smaller size? Is is a noticable difference?

ok guys so heres a vid i made of my dcon 12 just got it like a month ago and i am happy with my "lil beast"!!!! i made this video cause when i was looking into buying the dcon i was looking for vids of them and only found like 2 videos so heres another one for yall to see if your interested in buying this speaker. oh yeah this is my first box i have ever built!!! let me know what yall think!!!

So I just had my xcon delivered. I know coils aren't always perfectly spot on and impedence changes , but both of my coils are reading 1.5 ohms. It's a dual 1. Is this normal?

well one of my older set ups was an alpha on a saz1500 ported tuned to 37 hz and it was one of the best sounding subs i had ever heard. my xcon should be here this weekend so should i expect better or around the same. the alpha was one of the original models afew years ago.

in nj or some one close enough to meet me in new jersey. have 100-150 to spend. who can help me out? email me or pm me. [email protected]. thanks guys

will an saz 1500 get this girl going? just ordered my xcon 12 today and im super excited

While i'm waiting on my triple XCON box from trevor for the Santa Fe, decided to kill two birds with one stone so to speak. Having a box built by Argent for these ICON's and going to be doing some abusing in the absence of the XCONs. Here's what we have so far.... 2 of these are mine, 2 are for Ernie's Civic.