Sound Solutions Audio (SSA®)

hey guys, i got a 98 Honda CRV and i was wanting to use the design for the 12" Xcon. wondering if anybody has had any positive or negitive experience with the boxes. any difference between optimal or small boxes? also i hear sub up, port back is best for hatchbacks..will there realy be a big difference if their on the same face? i was gunna have them both face to the back. any suggestions?

Hi all, I'm considering a false floor, but depth will be a factor. I can't seem to find the depth for the 12 and 15" xcons on the site (store or the SSA site). Anyone got info to share? thanks

Hey every one i orderd a dcon 12 on november 20th and i dont want to sound like im in a hurry but... i wanted to ask people that orderd the dcon in the past about how long it took to get it and thanks in advance for all that respond

...the side of the vehicle looks like a water fall as it flexes ....you swear to god there is enough body flex to cause metal fatigue and you think your dash is going to fall off ....the rear veiw mirror busts off and shatteres when it bounced on the emergency brake lever ....the electric automatic latches on the rear windows brake trying to hold the windows shut and have to be replaced with manual ones .....the over head center console falls off and hits you in the head ...the Mayor of Salmon Arm BC politley asked you to turn it the fawwwk down when you drive by his house ...the local audio shop is getting complaints about the " white van" ...LMAO ....your system can be …

can't find a 12" D2 icon for sale on the forums. must be a reason.

LIKE THE TITLE SAYS

Hi everyone. I need to build a new enclosure for my pair of 15" XCONS. My ported box is coming apart and replacement is unavoidable. I want to build a sealed box and try them out that way for a little while to see if I like it better. If not, I will build a larger ported box later. The recommended optimal volume as listed on the SSA storefront is 2.75 - 3.0. I believe, and correct me if I am wrong, the smaller box will yield a tighter bass, but I am open to all suggestions and opinions. Space is not an issue. Box is going in a Yukon XL and the subs will be powered by a GP3000D, so 1500w to each. My listening preference is rock/metal , but I do listen to R&B/Hip Hop a…

Whats a good amp to power two xcon 15's i can get two saz-1500 used for $350 or one saz-3500. Should i get the d1 or d2's?

1920*1080 wallpaper one 1920*1080 wallpaper two Pictures a bit grungy / grainy, I don't have space at the moment to take proper photos.

I was looking through ssa products and none of them mention a shorting ring in the description. Do any of the ssa subwoofers use a shorting ring?

So i just purchased a 1st generation 15" icon from Big E! (great guy) And i've decided to take some pictures and post 'em up here! I had to take the pictures anyways since i have to send them to the real owner of the sub. I decided that there might be a few guys up here who would appreciate seeing them as well! It's also kind of a part 2 for my review on Big E as a seller. I tried to capture the very minimal inperfections.

haha, despite the NYS state of emergency, I love snow. Hope it keeps coming down. Here is a view outside of the SSA NY location.

I know the DCON's are rated at 300 RMS, what is the maximum RMS that I can run to them daily?

well i have had my Xcon for awhile now and just love it ( it sounds really good right now )... i have it hooked to my Hifoincs BXi 1208d... 1200 X 1 @ i ohm... i had this amp when i bought the Xcon, it is a couple years old.. so anyway what i am wanting to know is.... will i notice any changes in sound or output if i buy like a SAZ 1500d or another quality amp that does 1500 watts ? ( is it worth the money ) it is ia a 4 cube box ported to 32hz.... i read the post on the guy who built a sealed box for his Xcon... i mite build a sealed box and see how i like it... i listen to alot of rock... nickleback... metallica type music... once in awhile some rap just…

Hey guys figured I'd go ahead and show you my setup, check it out here: http://www.caraudio.com/forum/showthread.php?t=314357

Here are the results to the SSA xCon 15" sub woofer in WinISD the enclosure is 4.0 cubic feet tuned to 28hz, I hope this helps. I noticed no one else has one out yet and these always help me greatly.

Been working with Thumper on building a box for my 2001 s-10 xcab. After many measurements and alot of emails, it looks like I'm going with 3 12" xcons in my truck. My questions are on the xcons should I get the 1ohm or 2ohm subs. And my plan is to use Sundown amps so which would be better the saz3500d or the saz4500d. I work in law enforcement and do alot of police /saftey fair shows plus other shows and comps. This will be a daily driver but I will compete with it so thats why I ask the question about what ohm I should buy.

This weeked I competed in my first two seriosu competitions, everyone was super impressed with the whole setup. I was browsing the MWSPL site and found this written by Steve the guy who runs things at MWSPL. Oh Yeah Team Sound Solutions Audio!

got my shirt in today. thanks! great quality as usual Uploaded with ImageShack.us back: Uploaded with ImageShack.us

Here's some 12" Xcon pictures as requested

I was leaning towards a eD 13ov.3 but with the power I have on tap DLS A3 1200 watts at 1 ohm I am going for the big boy. So if you have a used one in good mechincal and cosmetic shape please let me know. I may have a TREO SSX 750.1 (does 1500watts at 1 ohm) for trade if you want to add a few bucks to the swap. I realized that I do have enough post to post the the forsale section so if there is a need mods please delete this.

Is this like a Bass eq or a gain knob? It has a clipping indicator which I've never seen on a Bass EQ knob. Oh and my install is nearly finished. I ran short on power wire (6" short uggh!) so I ordered some more. I would pick it up locally but it's hard to do with 'rona around

The 12" Dcon prototype just came in. Here are a handful of pictures. Testing on the 12" will start right away. Icon Prototype 12" on the left, next to the Dcon Prototype 12". Dcon 12 on the left, Icon prototype 12 on the right.