Sound Solutions Audio (SSA®)

bought this sub back in january and finally installed it in my truck about a month ago was in a sealed box about .7cubes and heard some air leaks first thought it was coming from a gap when i mounted the sub to the box. turns out a small spot on the dust cap was glued so i had to buy some goop and fix that works great after. recently started building a ported box and was going to mount the sub in the new box and was just doing a look over on all the parts before i mounted it and noticed a bit of glue missing where the cone meets the spider, it isnt seperated just missing glue it looks like. cant say if it was user error or just a mfg defect, sub hasnt been pushed hard i…

Just woundering if a 12" Dcon would work well in a home theater system. It would be in a seald box powered by a 250 watt Dayton plate amp. Andanother question, can you get the Dcon without the logo on the dustcap? Caus I want to go with a real clean look.

I'm trying to see if I can fit a 12" XCON in my trunk. Are these small, medium, or large enclosure subs? I know the Icon's are meant for relatively small enclosures. Power would be 1200rms if that helps any. Would like ported if it can fit. Have 2-3 cubes to work with.

When will they b back in stock?

I'm buying either 2 12" xcons or 2 15" xcons depends on what thumper comes up with and recommends for my truck x-cab s-10. I see in the ssa store that I can buy a combo of each sub with a sun down 1500 but I would like to only run one amp for the subs. Would the 3500 be ok or should I go bigger or should I go ahead and buy 2 1500. P.S. I'm comming to the dark side from running 2 JL 12W6 and 2 Phoenix Gold Ti 600.2 amps. IT'S LOUD BUT I WANT MORE

I have 270 alt. Big3. 4gauge wires. Kicker 750.1 I plan on running 1 this month an how much clean juice can she take? Hthinking about picking up hi phonics brz2100.

well i have had my Xcon for awhile now and just love it ( it sounds really good right now )... i have it hooked to my Hifoincs BXi 1208d... 1200 X 1 @ i ohm... i had this amp when i bought the Xcon, it is a couple years old.. so anyway what i am wanting to know is.... will i notice any changes in sound or output if i buy like a SAZ 1500d or another quality amp that does 1500 watts ? ( is it worth the money ) it is ia a 4 cube box ported to 32hz.... i read the post on the guy who built a sealed box for his Xcon... i mite build a sealed box and see how i like it... i listen to alot of rock... nickleback... metallica type music... once in awhile some rap just…

The 12" Dcon prototype just came in. Here are a handful of pictures. Testing on the 12" will start right away. Icon Prototype 12" on the left, next to the Dcon Prototype 12". Dcon 12 on the left, Icon prototype 12 on the right.

Hi everyone. I need to build a new enclosure for my pair of 15" XCONS. My ported box is coming apart and replacement is unavoidable. I want to build a sealed box and try them out that way for a little while to see if I like it better. If not, I will build a larger ported box later. The recommended optimal volume as listed on the SSA storefront is 2.75 - 3.0. I believe, and correct me if I am wrong, the smaller box will yield a tighter bass, but I am open to all suggestions and opinions. Space is not an issue. Box is going in a Yukon XL and the subs will be powered by a GP3000D, so 1500w to each. My listening preference is rock/metal , but I do listen to R&B/Hip Hop a…

Or should I just go with two xcons or maybe even a zcon if they ever decide to release it.

Lindsey and I attended the Ruckus & Chill 2016 show. We donated a pair of SSA Evil6.5 4ohms, an SSA Fatal Bass shirt, and a few Bass Drop stickers to the charity raffle for the http://www.falconchildrenshome.com Falcon Children's Home. Here are a few pictures from the weekend. We have loads more pictures and a ton of SSA APM-2 videos too.

This is going to be for a 12" dCON and I want to put it in its recommended sealed enclosure which is 1.2 cu ft. Just want you guys to double check on my specs for the box build, making sure the volume is right and all. Also do I need to use some of that box fill? If so how much Thanks guys, -Mike

An I missing something here? The Hellions turned back into Gcons?? Did the coding get messed up on the store?

This weeked I competed in my first two seriosu competitions, everyone was super impressed with the whole setup. I was browsing the MWSPL site and found this written by Steve the guy who runs things at MWSPL. Oh Yeah Team Sound Solutions Audio!

So i have 2 icon 10s sitting around at home. Not using them. But my car won't support an amp for two. So i am going to build a box for just 1. I was talking with a friend who builds boxes all the time. And we were talking about a box for one of them. I was thinking sealed since i listen to all types of music but i like to get loud too. But he seems to think that a 7th order box would be best. What do u guys think? Has anyone but an icon in a 7th order box? J/W thanks guys

What are the sealed and ported enclosure specs on the xcon 18's?

I was looking through ssa products and none of them mention a shorting ring in the description. Do any of the ssa subwoofers use a shorting ring?

I am going to change it from: "The pinnacle of sound & output" to: "We don't warranty stupid" I would like to thank Nick Morgan, as it was his slogan, we are just borrowing it. From something simple and professional, to something that hammers home our warranty policy.

anybody know the best amp to run 3 10"inch icons in a ported box?The budget is 350$ dollars,i would like new.Electrical will be big 3 and 1 kinetic battery in the back.

Got my new shirts in!!! They look amazing!!! Thanks guys!!!

Great sub...I do have a question though. I bought the sub from my son.....he bought it here. We built a 1.35 cube box tuned to 32 hz according to the reccommended box designs. I have been running it off a Usacoustics USA 2150 bridged rated for 500 watts. Probobly a little more than that......It has sounded incredible. I had the pleasure of recently aquiring an ESX Q275.2. Bridged rating is 800 watts. Am I getting close to the power handling of this sub? I have tried to find specs on the original run of Icons but have had no success.

Could someone please confirm the exact cut-out diameter for a new Icon 12"? The Sketch-Up seems to indicate just over 11", but I would like to confirm before touching saw to MDF. Thanks!

Can they perform in 1.75CF3 after displacement? What is the displacement? Can a box that is .75" MDF hold 7000W? Would it be wise to put a .75" piece between 4 of these? How much port area is needed? I can do 10, 11, 12" aeroports, or two (if theres a .75 bracing between 4) 8", etc. How much port area is needed for 1.75cf3 after displacements? I was going to use 4 sealed Eclipse SW8200's with a 3000.1, E Tech says NO ported, but I could put 1 huge aeroport through the back seat @ 47hz for SPL and insert a piece of cylindrical styrofoam for 30hz again, subs up, port into the cabin hitting the front seat divider. It would be badass if I did that but not if I could get Xcon…