Sound Solutions Audio (SSA®)

Just saw this banner... Is the Icon another new driver?

got my SSA icon 12 in the mail today, it suposidly only has 3 hours of play on it so if so it's a plus for me!!! but here are some pics

I ordered my Icon 15 within the first 10 minutes of them being for sale, or something like that. box is going to be 3.08 cu ft after displacement. pretty much 3 cu ft tuned to 35 hz. Just got my 2 brand new soundstream amps this past week, PCA 2000d for sub, and PCA 2.260 for my JL Audio XR 5.25 components, also a brand new strand of KnuKonceptz Colosseus 1/0 power cable. =)) Building box, running power wire, and hooking up sub on saturday=) might start box sooner. BTW::: The ups tracking number still doesn't tell me when the sub will be arriving!!! I wanna be home when it arrives!!!! I talked to denim on caraudio.com, and please respond back to me. P.S. I really…

The 12" Dcon prototype just came in. Here are a handful of pictures. Testing on the 12" will start right away. Icon Prototype 12" on the left, next to the Dcon Prototype 12". Dcon 12 on the left, Icon prototype 12 on the right.

Hey guys figured I'd go ahead and show you my setup, check it out here: http://www.caraudio.com/forum/showthread.php?t=314357

has anyone heard the ssa xcon in a sealed enclosure?i would love to do 2 15"s xcon in my dodge charger but i think i can only do 15s if i do a sealed enclosur..

Will be running it off a DLS A7 Sub channel at 2 ohm getting 440-500 watts. Can the 10 handle this in a 1.2cube ported box?

What's the optimal box volume and port area for Xcon 18". I plan on going for 6cft net cause space in kinda tight.

What are the sealed and ported enclosure specs on the xcon 18's?

i got a type r 10 right now and i was thinking about getting a dcon 12 next. would the dcon be louder than my type r?

Title says it all everyone be prepared!

I have heard here and there about the real world power handling of the XCONS. I have already gotten one of my XCON 18s, just waiting to order the other one. The amp i have is a Hifonics XXV Colossus. Was planning on selling the amp and getting the SAZ-3500, but didnt happen. So now I already have the dual 1 ohm subs, how do you think they will handle the Colossus rated 3200X1 @ 2 ohms, 1 amp on each sub? The box is 5.5 cu.ft. each sub, tuned to 31hz. They look so damn good, dont wanna see em go up in smoke!!!

Our very own Dr. Lindsey's YouTube channel kickoff video! Show her some support, and go to her YouTube channel and hit the subscribe button. #ArriveLoud http://www.SSAudio.com Dr.Lindsey_SSA YouTube Channel: https://www.youtube.com/channel/UCWMBKrOufGKcvPeJLFaHG3A

Whats the difference between these three subs and how do they compare against each other? Which one gets the loudest, best sq, & can handle the most power? Lets say there's 2 15s in the max recommended ported box on a Sundown 1500 for comparison.

Was having a box built by iamamp3pimp for my AA Chaos 15D2 to run off my AP15001D, but had some cash flow issues and had to sell the sub. Box is halfway built. Will be 2.8^3 tuned to 35Hz with a kerf port. It is a copy of the design that was used for my last Chaos 15" with the tunning bumped up from 30 to 35Hz. Here is a pick of the first box, only difference is port tunning and the new box will be raw birch that will be stained Cherrywood in the future. You guys think the Icon will be good in this box off 1500 rms? On a side note, Mark, would it cost xtra to get the full Xcon dustcover ike LoudGeo has on his Icons in the Punisher?

I just obtained an SSA DCON12 single 4ohm. It will be run off a JBL MS-A5001. So 500 watts. I am looking for SQ. My last setup was a CDT QES1220 in .62cu.ft sealed. It sounded phenomenal. But I made the mistake after selling my Explorer of telling the wife that the CDT is hers..lol So now I have a chance at the DCON. Couple questions: 1: How will the DCON respond in an Infinite Baffle? 2: If I run sealed, have you guys plotted the 12's to see where it gets the flattest response? .75, 1, 1.2 cu.ft???

first of many shipments from the build house. Aaron and I have decided to keep an inventory of D2's on hand for faster shipping.

Hi All, I purchased a 1.48 cubic foot box for a 12 inch Icon that I was purchasing, since it was the optimal size box after the sub displacement. However, through some serious luck and acts of nature, I was sent a 12 inch Xcon instead of the Icon. The sub is being powered by a SAE-1200D at 1 ohm in the back of my 2004 Impala. While the Xcon sounds great and is finally breaking in, it seems to want a bigger box. The sub is crossed at 80hz, and hits really hard in the 40 to 50 hz range, but below that it seems to run out of steam fast. I am guessing that this is due to the small box. I don't have the funds to have a new box built right at the moment, so I was wondering…

thinking about a zcon 12" and strapping 2 cadence a7hc rated@1200 but have been benched @ over 1500-1700 rms. also thinking a slot loaded box. will be going in a durango. what you guys think will the xcon handal the power daily? going for ""SQL"" cdt comps in all for doors powered bt a zed us acoustics 6300 and a lanzar zed made 30 band eq

I ordered 2 12" Xcon's on September 30th, hoping they ship soon, anybody know how long it takes? It's been 27 business days and they haven't answered my calls or called me back Also, will 12 gauge speaker wire work? I will power both 12's off a Rockford fosgate T2500-1bdCP. And do they need to be broken in when I hook them up originally? Or can I play them full tilt right away as long as there's no clipping?

how much does an xcon 12" weigh? and 15"?

Here are the results to the SSA xCon 15" sub woofer in WinISD the enclosure is 4.0 cubic feet tuned to 28hz, I hope this helps. I noticed no one else has one out yet and these always help me greatly.

I am trying to get my 15" xcon reconed, whats the best email to get a hold of SSA? Thanks for any input!