Sound Solutions Audio (SSA®)

just keep getting treats in the mail ed nine.1 came today and look it already found a friend haha. install starts wednesday hopefully when box comes

Thought we would take it to the next level and have product introductions for each subwoofer. Still awaiting the GCON video. Thanks to Bryan from Modified for the great editing. Enjoy. DCON ICON XCON ZCON Added them to the store for their respective category also.

An I missing something here? The Hellions turned back into Gcons?? Did the coding get messed up on the store?

I'm finally getting to add the rides section back to the main site http://www.soundsolutionsaudio.com , if you or someone you know own's a SSA product and would like to added to this section please either email [email protected] with your system info, pics and video, or submit them via this thread. Thanks for your participation!

I have a DCON 10 currently in a ported enclosure, but just don't really care much for the sound. My car seems to have a nasty 40-45hz boost and almost no bass around 60hz with the sub rear facing in the trunk. I've tried moving the box around and have been able to get better sound with it corner loaded firing basically across the trunk. However, the box I have is really too big to fit like that, so I am wanting to construct a new one. The question that I have is how much space do I need behind the woofer for the vented pole? I'm trying to make the box as shallow as possible. The sub has 6" mounting depth and I'm assuming I would need another 2 inches or so to be saf…

I am thinking about getting an Icon 15 but I have some questions. I currently have a Diamond D3 15 and an AQ1200D. I will be using this amp which I know should be fine but I would like to use my existing box. The box I have is from audio enhancers and its 4cubes tuned to around 32hz I believe. It is the model designed for Diamonds though and would like to know if it will work. This will be going in my 03 Blazer.

Can they perform in 1.75CF3 after displacement? What is the displacement? Can a box that is .75" MDF hold 7000W? Would it be wise to put a .75" piece between 4 of these? How much port area is needed? I can do 10, 11, 12" aeroports, or two (if theres a .75 bracing between 4) 8", etc. How much port area is needed for 1.75cf3 after displacements? I was going to use 4 sealed Eclipse SW8200's with a 3000.1, E Tech says NO ported, but I could put 1 huge aeroport through the back seat @ 47hz for SPL and insert a piece of cylindrical styrofoam for 30hz again, subs up, port into the cabin hitting the front seat divider. It would be badass if I did that but not if I could get Xcon…

I just received the newsletter from SSA, it mentions a few updates and what not.. One of the links which got me all excited and happy says 12" Icon sale pricing! Of course I clicked the link and it is dead.. This is what I see, anybody else have the same issue? I wanna buy a new woofer!!!

I've been curious about the Xcons for a while now. How much louder are they than the Icons? Would an Xcon 12 in a 2 -3 cube ported tuned to 33hz powered by a Sundown 1500D be louder than an Icon 15 ported in about 4.5 cubes tuned to 33hz powered by a Sundown 1000 watt amp?

The highly anticipated pre-order of the APM-1 SPL Meter is now open. Quantities are limited, so act fast. $449 shipped in the US48 states. Estimated ship date as of now is March 1st. http://store.soundsolutionsaudio.com/products/apm-1-spl-meter.html

I was wondering why the Xcon is able to have such a high BL despite only having a single magnet slug?

so i have an extra enclosure laying around and had thoughts of 1 each Icon 12" dvc 4 ohm for it enclosure is 31" wide 14" high 19" deep 1 " MDF 100% all the way around 4 each aeroports , 4", and they are 7" long anyone have thoughts on this match up Thanks Travis

Due to a very high need to keep track of everyone's recones, and to cut down on shipping quote time on our end we decided to get a bit more efficient and post these recone kits with various options per sub woofer series in our store. This is a much better way for us and for you as the customer to keep track of your recone status with SSA. ***We apologize in advance for some of the shipping quotes you may receive via UPS, in this day and age, there is nothing we can do about the raising cost of shipping rates. Enjoy. http://www.soundsolu...gories/Recones/

i want to make a ported box for my xcon 10 and i was thinking about modifying the predesigned enclosure to make it fit for my car. I'm just curious why the boxes are the same for the xcon and icon 10's. the recommended specs are different for the 2 woofers but i can't find a difference between the pre designed enclosures. should i be using the recommended specs as a guide or the predesigned enclosures as a guide. just a bit confusing.

Hello, could anyone tell me the diameter and height of the Icon's (12'') magnets, please? THX from Germany

Do you guys think the icons sound better in sealed or ported box? Being that the sq, and power are neutral.

would 900wts at 2ohm be ok to match up with a 15"icon in a fisher ported box

10" ICON Sub Woofer

Hi is there a difference in the icons that had the blue dustcap writing, or are they the same specs? Also how does 2 12" icons vs 2 12" Fi ssds flatwind bp, match up? 4cf 33hz box with 2500rms. Any input would be appreciated.

So, a friend of mine is looking for some good bass in his car. He has tried many things, and I don't think he is looking in the right place. He currently has 2 12 Kenwood KFCs in a sealed box, but has also had pioneer 10s, (the gray ones from wal-mart), and visonik 10s and 12s. The problem with the Kenwoods is that they don't hit the lows he is looking for. I was hoping to help him sell the Kenwoods and was thinking of steering him towards the DCONS, (budgeted install... budget is probably what he can get for the kenwoods and 1 10inch pioneer and his amp, a sony 220 gtx). I think that he wants to be plenty loud, but still sound good on a low budget. The vehicle is a…

Just wanted to say that I was thrilled to finally meet you guys at Slam. Thanks for my new Evil mids and tweeters. And again thanks for all you guys do. Love the forum.

I'm looking at getting an AQ2200, now I don't think it is too much for the sub when it's broken in, but what about breaking it in? Just keep it low for a while? Thanks

Is there a specific length or width of the port inside the box for the max quality of the speaker paired with with Sundown 1500D. Any advice would be great, building it for a 2010 Camaro. Cant wait to post pics.

Looking for a little help on deciding which sub setup to run. First off the vehicle is a 2005 explorer. Already have a Sundown SAZ-3500d to power them. Electrical upgrades will be DC 270 amp alt., big three in 1/0, two runs to back of vehicle in 1/0 and 2 D3100 batteries. Purpose of the system is daily ground pounder. Want loud and clean. Listen to a little bit of everything except country. The original plan was 2 XCON 15's in a ported enclosure. I've been reading the forum a lot and watched some videos and have seen some really nice systems using 12" XCONS and ICONS. My uncle suggested I run four 12" ICONS sealed. He has always run sealed enclosures. My dads b…