Sound Solutions Audio (SSA®)

anyone? Making a compilation right now...

I made up my mind!!! and it's the Xcon.Since the xcon been on parole I can't stop drooling, 31 mm Xmax damn!!!! I will like to know the min. and optimal cu. ft 12''s and 15'' ported????

i have pair of dcon 10's. I want to make an enclosure for them and its recommended 1-1.25 cubes 28-33 hurts. what does the smaller size do? Would that mean more power handling? More punchyness? I have a us amps merlin md1 for power and plenty of juice for supply. also what does the tuning frequency effect. i listen to a broad array of music slipknot and mudvayne lamb of god to eletronic and rap. i know there is no perfict setup for all but what would you recommend? I have a 2005 civic sedan if that helps. thanks

What series SSA sub would suit me best? I was looking @ FI BLs or Qs but lost instress because the guys on the Fi forum are to Baised. All i asked for is a sub that could get loud and sound good. They say you can't have Both. WTF! the reply is BLs get loud but lack lowend and SQ the Qs sound great has lowend but lack output. Please! Please help me decide , i don't want to Compromise SQ over Output. For the record i have power to spare and space to work with and i'm lookin @ 18s btw. All i hear is Get BLs NO get the Qs what type of music, what amp, what vehicle, ported or sealed. yada yada yada.

Updated the website to match the crisp new look of our subs. Check it out. http://www.soundsolutionsaudio.com

Well this summer I am planning on walling off my 2000 accord coupe. Im already sponsored by Diablo Audio Technologies so I will be running their amplifiers. (most likely the 2500.1s) I have been doing a lot of searching for woofers and came across these and something about them is just screaming my name. I was originally going to go with 4 15" Havocs since they get piss loud and sound good doing it, but didnt really have the power handling I was looking for. The XCONs seem to be the one. I was originally going to tune the Havocs to 30hz because they love the lows, and apparently the XCONs love the same tuning as well. I want a loud daily driver that will deliver on the lo…

just wondering if anyone has run a xcon in a sealed box ? i know this woofer is a all out high power sq sub and would like to know its best application. sealed or ported in a low tune box. im thinking of doing a single 12 in the back of a suv with a 1500d or aq2200. any imfo about this sub or opinions welcomed. I know it just hit the market and there are limited amount of users

So yesterday i installed my new 10" Icon with a 125.2 Sundown. And install went fine, little trouble with the Line Out Convertor, but we worked through it. After it was all installed and setup good we started messing with tuning, and man this setup was POUNDING away on my BMW!! I mean for a 10 and the 125 to be hitting this hard was amazing. Cutting the story short i was driving home and had the music going nothing outrageous just listing to the radio. I get up this morning to do some final touches and noticed that my license plate had rattled off on my way home!!! I thought it was hilarious!!! Well that is my little plug/review of my new SSA/Sundown system!! Thanks.

I dont know if i'm askin this too early but since they are available now, what is the box requirements for all XCONs? Also, what is recommended tuning?

I just put my dcon 12s in a sealed box in 1.25 cubes each and they are being powered by a Rockford Fosgate T500-1bd. I understand that they are not broken in yet. What's the difference in sound when they are broken in? So far they sound awesome and DO get loud sealed and let me tell you, these subs hit LOOOW. I don't regret sealing them at all. Another thing I immediately noticed about them is they have crazzy excursion. Way more than the JL Audio W3D4 12s and Orion P12s I used to have. Are you sure their Xmax is only 16mm lol?

can't find a 12" D2 icon for sale on the forums. must be a reason.

anyone wanna see some pics of the finished product?? I just got them in, and they are the best looking speaker i've ever layed eyes on...

Heres mine, just got them in today. no pics of the dustcaps for you all, that's private until the larger one's come in. But the one's on now look very sexy Made sure you couldnt see the cap

I am waiting for my Icon 15, but when I try to track my item nothing move ! Here is whe answer : "The U.S. Postal Service was electronically notified by the shipper on March 25, 2009 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later. " When I emailed them : "Thank you for contacting us about your international item number,CV007046789US. I apologize, we are unable to provide any specific information regarding your item. For further information and assistance regarding your …

Because we did a running change again to the dust caps which i'm sure everyone will be very pleased with i'm not going to show the front of this woofer. But this is the production 18" that just arrived. I'll get full product photos next week of the rest for all to gaze apon

i was thinking about getting 2 icon 12s and i was wondering what would be a good amp to run them? i would like to stay cheap but i want a good quality amp. it probably be in the loaded enclosure from fisher customs. so the specs of that box

XCONs should be shipping out tomorrow! For all those who have tracking allready, please keep an eye on it (like you're not allready) Cross your fingers, the time has arrived! I have a bunch coming to me as well for a photo session then it's time for the brochures to be made. Exciting times around SSA

Whats the difference between these three subs and how do they compare against each other? Which one gets the loudest, best sq, & can handle the most power? Lets say there's 2 15s in the max recommended ported box on a Sundown 1500 for comparison.

Hello everybody, I made up my mind : I really want to buy the 15" SSA Icon sub. I receive a few messages of AAron, but I am still waiting with my money burning my pockets :bigclap: I cannot order from the website because of the shipping info needed. What a pitty I know it will take a long time to be shipped over here in the Carribeans, but I want it, and that's it !!! I already know what kinf of enclosure I will build : a simple 3 cu feet sealed enclosure. I would like to try it ported, but it needs more room, and I don't want to go over 3 cu ft. If you have somme advices, I take everything! Don't worry!

This review is a result of the SSA Dcon Give Away here on DIYMA. So, first I would like to thank Aaron & Mark of SSA for participating in the give-away and providing 2 free drivers to members of the community. Specifications for the driver can be found HERE. The cost for the driver once added to the cart in the shopping section of the SSA website is $165 plus shipping. As you can see from the below picture, the driver is single boxed with 4 foam pads glued to the sides of the box at the mounting ring and (not visible) foam padding underneath the motor structure with an inner cardboard "box" that surrounds the motor structure. The driver did shift slightly during s…

when will more xcon's be available?

Well, the DCON 12 that i won in the giveaway arrived today. I immediately removed it from the package and examined it. Aside from the motor it is a spitting image of the Icon. Glue joints are flawless and just looking over it and holding it you can tell the build quality is top notch. I have pics i will post up when i do the build log I actually spent yesterday rewiring the car and prepping things, so i was eager to put it in a temporary prefab box to start breaking it in. I finally got it in around 8 this evening and started to play around with it. New box build will be coming over the next week, it is currently in 1.25 cubes gross, sealed I can already tell that this t…

Ok here are pics of my 10" DCON that I won... :bigclap: . Also I will be posting my build log and review as I go. So here are the pics. Arrival: Open: Angle view due to glare Side view Another side shot Another And the @$$ shot And finally with the SSA Stickers... :clap: This speaker is built like a tank. Build quality is top notch and the attention to detail is flawless. I am hoping I can get started on the box's this weekend. I am going with 2 boxes. 1 sealed and the other ported to see what this thing can do and compare. The wife as expressed an interest in this sub, she would like it for her vehicle.

Here's a video from this build. http://www.soundsolutionsaudio.com/forum/i...showtopic=26020 Enjoy

We have an update. The news is that the Carbon Fiber dust caps that were originally planned for the Xcon have been delayed. But we are going to offer dust cap options. The logo will be the same regardless of option choice. By doing this we are able to keep the standard cost of the Xcon down just under the $400 mark. The XCON will have option of three dust caps: 1.) Inverted Cap (concave mica reinforced polypropylene) 2.) SSA Convex Cap (Same as Dcon and Icon) 3.) Carbon Fiber Cap (Offered at a later date) + $17 The standard Xcon dust cap offered is the inverted option which we feel with give a very clean look.