Sound Solutions Audio (SSA®)

Due to a very high need to keep track of everyone's recones, and to cut down on shipping quote time on our end we decided to get a bit more efficient and post these recone kits with various options per sub woofer series in our store. This is a much better way for us and for you as the customer to keep track of your recone status with SSA. ***We apologize in advance for some of the shipping quotes you may receive via UPS, in this day and age, there is nothing we can do about the raising cost of shipping rates. Enjoy. http://www.soundsolu...gories/Recones/

heres a short video of my new set up. The sub is still extremely stiff and needs to get broken in but it still wangs pretty good. Its wired to 1 ohm and playing hypnotize my young jeezy. video really does the set up no justice though. i took it with my camera phone so you cant really see all of the excursion or hear how loud and clear this thing really is but i promised a video today so here it is. im off to work now so enjoy. feel free to leave comments good or bad. oh yea and you can see the spare tire because i pushed the box farther back in the trunk an the thing that was covering it moved back a little but i covered it up again haha so my trunk doesnt always look lik…

I am thinking about getting an Icon 15 but I have some questions. I currently have a Diamond D3 15 and an AQ1200D. I will be using this amp which I know should be fine but I would like to use my existing box. The box I have is from audio enhancers and its 4cubes tuned to around 32hz I believe. It is the model designed for Diamonds though and would like to know if it will work. This will be going in my 03 Blazer.

I have heard here and there about the real world power handling of the XCONS. I have already gotten one of my XCON 18s, just waiting to order the other one. The amp i have is a Hifonics XXV Colossus. Was planning on selling the amp and getting the SAZ-3500, but didnt happen. So now I already have the dual 1 ohm subs, how do you think they will handle the Colossus rated 3200X1 @ 2 ohms, 1 amp on each sub? The box is 5.5 cu.ft. each sub, tuned to 31hz. They look so damn good, dont wanna see em go up in smoke!!!

I finally installed my icon 15 in my truck. I had tried it in a friends box but today i put it in the console box I built. It bis 3.75 cubes tuned to 32 hz. I LOVE IT!!! It flexes my roof and all four windows and still sounds very clean. Just wanted to thank everyone for talking me into getting it instead of the kicker L7. Also thanks to SSA for making an incredible sub.

Hi guys, I'm installing an a new sound system in my BMW X1 F48. I want to buy 2 Gcon 10s. I will run them on 1500 to 2000 watts, and I need a serious box design for them. I want a ported box, tuned between 32-34 Hz. I think subs up and port back, in the middle should work. I don't want both subs to share airspace, one would near the port and not the other. I don't know what is the optimal size to use. I can pay for a good design, I know nothing is free !

Any updates on the "khaotic" enclosure brand

First impressions: MASSIVE.

SSA Dcon line up price drop! Since we know these are excellent drivers that are very capable of surprising people and are one of the best offerings in the 300 watt ratted "SQ" minded sub woofers on the market. There are not that many are out there, (even after extremely positive reviews, and a give-away), so we are officially lowering the price to make them a little more affordable. SSA Dcon 10D4/S4 now $115 !! SSA Dcon 12D4/S4 now $125 !!

Our long running FB page is getting more traffic, so for those who have not found it yet, check it out here: http://www.facebook.com/pages/Sound-Solutions-Audio/170860939855 We might post up a special and news on there too.

How low can two 10" Dcons go?? I wanna make a ported box tune to 30hz but I listen to a lot of hip hop, dnb and dubstep. So, I want them to hit low, to vibrate my car pretty good(94 Corolla sedan). The power is 500w rms.

Hey, wants to know that whats the cost of re-cone my Xcon 12 d2, sub give up on my after 9 months. Top of the voice coil burnt a little and Can't turn on again. =( price of recone and ship from New Orleans LA, THHXXX

Whats the difference between the old and new versions?

this thread is just to gauge the interest you guys would have in this. I got permission from, in fact, welcomed open arms from MTX on a SSA tour. I would really love to see this as it is a very fun place to visit. IT is the Phoenix campus where they make and distribute alot of their high end amps and much much more. If you are in the AZ or surrounding area's, and would like to be a part of this, please post up a general date range when this would be possible and lets see if we can all come to an agreement on a date. Would be a fun time for sure! Me: I'm set for when ever is good for the masses!

I have had my Dcon's for a while now and I must say I am very impressed with how loud these little 10's can get while sounding great at the same time. At the time of thier arrival I did'nt really have the money to get a custom enclosure made so a friend of mine sold me an dual 10" audioenhancers enclosure he had laying around in his garage. He showed me the specs of the enclosure on the internet (3.18 cu. ft. at 33hz) and I figured that would be fine for them. Since i've had them I've always noticed that they hit the lower low notes but did not produce as much volume from them as I was expecting without me cranking the gains on my head unit. Today I finally checked the sp…

Who can I talk/pay for some help with my enclosure/ deciding which sub would be best for my enclosure size. using SSA subs.

Anybody know what the mounting depth is on a 12" XCON? Can't seem to find it anywhere.

Ive been patiently waiting on some specs for the xcon 15". Just wish you guys would hurry up and post them on the website. Thanks.

I finally put in my Icon 15. It's in 3.5 cubes tuned to 34 hz and it is loud as fvck and sounds clean to boot! The funny part is it isn't even broken in.

When the new icons come out will I be able to get mine reconed and matched to a newer model so I can buy a new one to match? I will also need mine changed from d2 to d1.

Title says it all everyone be prepared!

got it a couple days ago but my camera batteries died off

I thought this was pretty cool. Of all the different pictures and manufacturers they had to choose from they picked SSA XCON's for the picture in their ad.

Hello, could anyone tell me the diameter and height of the Icon's (12'') magnets, please? THX from Germany

would 900wts at 2ohm be ok to match up with a 15"icon in a fisher ported box