Sound Solutions Audio (SSA®)

Here is just a teaser pic, testing will begin soon. Specs and info will follow soon after. Just wanted to get a pic up asap due to being very excited about it because I have been waiting for it 6 months.

Hows it going fellas. Let me preface; I've been running my 2) 12" GCONS in the DC-Creations 1.35 ft^3 Sealed Enclosure @600W RMS Each (Kicker ZX1000.1) for quite some time now with absolutely no issues. I love these speakers and the DC enclosure is dynamite; not a single problem whatsoever. Like my previous review stated, they're loud, clear and rugged as hell. I had previously ran a couple of sets of 10" and 12" Type-Rs with this same amp and they just couldn't hang; ended up burning up multiple subs over the years. The GCONS have always stayed cool even after countless 5-10+ hour road trips. Anyway, I've always wondered how they would sound and how loud they'd b…

I was just wondering I have 4 gcon 12s in a blow thru in my Nissan hardbody reg cab I love then I had them on a earthquake 5k and did a 148.9 at 30 hz I was thinking about cutting out the rest of the cab and getting 4 more gcons 12s or should I step up in model I realy like the gcons

Dose anyone know if I'll run into any problems .I have a D1 zcon and ordered a D2 not knowing that i might have gap issues .

SSA needs thier own team sub

I have a 98 s10 ext I plan to get a ported box, which would have deeper bass, and be louder. 1 12 icon or 2 SSA 12s?Also not sure of a good amp to buy but want to keep the price under 350$ any suggestions?

I have a 98 s10 ext cab, have not chosen box specifications, or an amp yet. For the amp I'm thinking about getting a 1500 watt audiopipe. For the box I plan to go ported. Which would be louder and with deeper bass 2 12" gcons which are 750 rms or 1 12" icon which is 1250 rms?

We are proud to finally offer a SSA License Plate, by ToolMaker Metal Workz. $19.99 Shipped in the US48. http://store.soundsolutionsaudio.com/products/license-plate-ssa.html

So I found on another forum an Xcon 12 that is the 2011 model for 200. Pretty good deal!!He bought it november of 2011. Turns out he's local too. Just wondering if there is any difference in that model than the newest one? He's actually a member on here also under the name dwnrodeo but he's not so active he said.

does anyone know where I can recone my xcon? I was going to send it to fixmyspeaker but heard a lot of crap about psi

I was wondering if anyone has any experience with a 10 inch ICON in the single ported enclosure sold in the ssa store? It seems to be a little small for the ICON

I know I should have gotten an ICON 12 but I got the ICON 15 from W140 on here. Great seller and smooth transaction! He's going to get me in trouble with the wife since he's sold me my amp as well. Anyways, I'm a bit restricted on space since I need to fit a stroller in my trunk. I've measured my max dimensions for a sealed box and it comes to a net volume of 2 ft^3 after driver displacement. If I use 2 lbs of polyfill, will I still receive decent output and freq range? Sub is being powered by a Soundqubed 1200.1 running at 1 ohm.

Getting my new ICON here soon and was just wondering which route I should go for hooking it up. I have an Audioque 1200d amp, so its 1200w @ 1ohm and 870w @ 2ohm. I was planning on giving the sub the 1200w, but I'm wondering if I should go the 870w route. More or less, I'll be unpacking the sub, installing it, and then hitting the road for a long road trip... so its going to see a lot of use right out of the box. Would it still be ok to go with the 1200w, or is the 870w a safer route? Thanks!

I have 270 alt. Big3. 4gauge wires. Kicker 750.1 I plan on running 1 this month an how much clean juice can she take? Hthinking about picking up hi phonics brz2100.

Can someone help me out an give me some measurments for my sub. Pefer a slot port box. Truck is a 08 supercrew f150 an amp is kicker 750. Thanks!

so I just hooked up my xcon today to a Rockford fosgate punch 1000x1bd doing 1400 watts rms (stock electrical for now, so I know I'm not seeing all that power) .. wow this thing sounds awesome I am only giving it .5 of airspace sealed it being a 10 inch sub. before I had a kicker cvr and even when I play the same songs I hear frequencies in songs that the cvr didn't even play. my xcon does get warm but don't blame it cause the box is small..... whoever builds these subs , please keep up the good work.

Going on now, on Facebook. https://www.facebook.com/SoundSolutionsAudio

which should be louder and better for one sub running with autotek mm1-1500d gcon 10 or sundown e10

I love the look of the SSA subwoofers but I wonder.... Why are they priced the way they are? I don't doubt the pricing but I want to know what it is about them that makes them worth it? Please try to be specific/technical in your answer. Thanks!

When does he get back? keep hearing hes out of town, but I'm just curious so I know around the time he will get back to me.

Hey everyone like my title says been gone from the forum since i picked up my 2 10" dcons... and its because. WOOOOWWWW!!! These things in the right box can really get low and loud im driving and have to lower the volume so i can drive straight because all the pounding they make my god does my head vibrate soo much i get dizzy never had that feeling before. I love driving by others with 12" or 15" subs trying to show off i just turn up my volume game over its ridiculous people think i have 4 12's and when they see 2 10s their jaws just drop and its funny lol i stil need to deaden my car but i get lazy to do it anyways im super happy i bought these from a fellow forum memb…

I was looking through ssa products and none of them mention a shorting ring in the description. Do any of the ssa subwoofers use a shorting ring?

Hi I have someone who has heard of SSA and is interested in 15" ZCON He has a SoundStream DTR 3400.1 tower amp Before I tell him to order the sub.... I'm wondering if that sub and amp match well together? and which ohm to run the sub at? and the perfect box size assuming the car has unlimited space? the only reason i told him about the ZCON is because its the best of the best

so I just got my xcon 10 in in the mail yesterday .. its A MOTHER$%&KEN BEAST . never have I owned a sub of this quality .. I need advice on what kind of amp to use. I would preffer not getting hifonics. the xcon will be sealed. any input is appreciated

Is it really 3 weeks right now?