Sound Solutions Audio (SSA®)

im wanting to try a new sub to get a little better sound quality. the box is right at 1.0 after port and sub displacement. i think 1.35 or 1.4 before. the problem is i only have 7 inches of mounting depth. i noticed the subs are built a little differently but each have the same mounting depth for the 10". mainly what im wanting to know is which sub would be better with the mounting depth i have.

After a long wait, they are back and good to go. The pre-ordered drivers will go out first. Thank you to all those who waited it out with us. Also, I will have the Sundown 1000D + Icon combo back up on the shop shortly.

Has anyone tried a xcon in a 4th order? I have 1 10 right now on a saz1500@ .5 in a 1.75^3ft tuned to 31hz with 31" port area. It's in a 18 wheeler and am having trouble getting it as loud as I'm sure it's capable of. I previously tried a 1.25 sealed and enclosures didn't make much of a difference. This vehicle previously had a difficult time due to cancellation. The space I have to work with is 13.5h, 37w, 23d. I was gonna try using a smaller enclosure and less port, maybe down to 13" per cube. I'm about to order a second 10 and another 1500 to get the cone area and power up. But I wanted to eliminate the canceling of the cone/port and try a 4th order with the port firin…

After our monthly crew meeting at work one of my coworkers was driving in front on me. We both ended up at the same bank and he came up laughing at me. I asked him what was up and he said he could feel my bass on his back in his truck while driving in front of me. Thought that was pretty funny with 2 15" xcons sealed.

Here's a video from this build. http://www.soundsolutionsaudio.com/forum/i...showtopic=26020 Enjoy

Back in Oct. 2010 I had a box designed for an 10" Icon at that time which I became pretty busy and never got a chance to buld it or buy the sub. Since then I've noticed the Icons been revised, I'm wondering if I should get a new box designed or if the new icons are pretty much the same as the old icon specs that the design I have will be fine??

Thursday night before work... bored... picture time! Today I finished the sub box, replaced my two 4ga runs with a 0ga run, and built the amp rack (just need to get the amps out the car so I can drill the appropriate holes for the connectors) 1.8cu ft w/ 1lb polyfill (test) Two - 10" icon Dual 1's Sundown SAZ-1500D Front Hertz HSK165 with rainbow cal25 tweeters (one of my hertz tweets blew) Hertz HCX165 Sundown SAX 100.4 All kicker hyperflex wiring Optima Yellow top Big 2 of 3 Dynamat/Raamat/SS all doors, trunk lid, trunk floor (Middle pieces just extra bracing, i did take those pieces into account for air space yes) andd the car

We need some updates on some scores using these bad ass SSA Subs. What kind of numbers are being put up using the Xcons now that they have been out awhile? How are they holding up? Numbers on 12s, 15s, 18s would be nice. Lets go SSA guys!

So I purchased an Xcon through Amazon from SSA and it already says my shipping label has been created. Does that mean it's already completed? I just ordered it 2 days ago.

where can i get stickers i can put on my car?

my xcon 12 is here

4 12" XCON's or 2 15" XCON's? Box is going to be LxWxH = 21x41x24 and shoot for a 32hz tuning. Curretly running an AQ2200d, if i run the 4 12's i will get another. Have yellow top up front xp3000 at rear 230a alt. and big3 done.

hey there guys, so finally i decided going with my sub, ssa zcon 15'.. i just had question.. which one shuld i go with ?? the D1 or D2??? i will be running the sub with a sundown SAZ-2500d and i want the sub to powered what it requires?? so before i go ahead and order the Zcon, i just wanted to make sure which one. thanks!!

Aaron and I ordered 1000 stickers a while ago and finally got them in! colors available are: white, blue, and yellow they measure out at : 6" x 2.5" these will be given away with every sub ordered. Also we're working on getting larger production stickers for the shop. But we're not locked down on pricing as of yet. We will keep you all posted

I compete in MECA and went to my first comp. today with the xcon's. Did my personal best of a 151.1@40hz Also did a 127.6 in park and pound....mic outside the vehicle 6 feet away. These subs not only sound awesome but can get pretty loud too. Did 3 p&p runs back to back (30seconds full tilt) and the subs handled it fine, didn't get warm or smelly setup is 2 15" xcons's on a crescendo 3500

So I have been thinking, If I wall off behind the second row I should be able to get about 14 and a half cubes. Subs on the outer sides and 200sqin of port in the middle. I would be uprading the electrical, with h/o alt, big 3, and atleast 5 batts(1 up front 4 in the back). Another saz 1500, and a shit ton of deadner. I will be upgrading my fronstage as well. I am hoping to do atleast around 146 or so. That would be double the cone area and double the power, aswell as aupgraded electrical. What do you guys think????

are Dumax and/or Klippel measurement reports available for the Zcon series? Particularly interested in the 12".

Because we did a running change again to the dust caps which i'm sure everyone will be very pleased with i'm not going to show the front of this woofer. But this is the production 18" that just arrived. I'll get full product photos next week of the rest for all to gaze apon

I am waiting on my sundown saz-2000d and i want new subs, i currently have 3 kicker cvx 12"s in a 6.4ft^3 @ 30 Hz. I wanted to keep my box cause its perfect and the best i built and thought about getting 3 12" Icons but dont want to underpower them. So lately i been wanting one 18" xcon or two 15" icon in a 6.15ft^3 @ 30Hz, 31Hz or 32Hz(havent made my mind up). what would be the best route, appreciate all the info.

so I just got my xcon 10 in in the mail yesterday .. its A MOTHER$%&KEN BEAST . never have I owned a sub of this quality .. I need advice on what kind of amp to use. I would preffer not getting hifonics. the xcon will be sealed. any input is appreciated

This review is a result of the SSA Dcon Give Away here on DIYMA. So, first I would like to thank Aaron & Mark of SSA for participating in the give-away and providing 2 free drivers to members of the community. Specifications for the driver can be found HERE. The cost for the driver once added to the cart in the shopping section of the SSA website is $165 plus shipping. As you can see from the below picture, the driver is single boxed with 4 foam pads glued to the sides of the box at the mounting ring and (not visible) foam padding underneath the motor structure with an inner cardboard "box" that surrounds the motor structure. The driver did shift slightly during s…

I know the icon is not a spl sub, but I was wondering if anyone has had a ssa icon 12 (or other size) in a ported box metered? Just kind of curious as to what kind of decibels my icon can put out.

Hey i just got my 12" icon D1 in last week and i must say i like it! It's in a 2.2cuft box tuned to 32hz powered by a jbl gto1201.1(1100rms rated) with 0 gauge knu wiring. It slams the lows like crazy. My last setup was a pioneer 3004spl in a 1.75cube box tuned to 32hz. Now the icon is classified as a sq woofer but it blows the pioneer out of the water in both sq and spl. I love how i can turn down the gains and lpf if i want some smooth clean bass and then set my gains to 40hz @ -6db and have bass that literally rattles my rearview mirror right off. I am very impressed in my purchase and for 263 dollars shipped to my door with a sticker lol you can't go wrong. Al…

I just put my dcon 12 in a 1.3cf sealed box it is air tite have 300 wats going to it and it sounds nice but I thaught with all the hype it would be better I know the sealed box is part of it but I have onely about 15 minents of play time on the sub so with more play time will the sub sound better I will have pic of my old setup and my new one up tomarow

Just curious if you guys are having another sale this black friday!