Home Audio

so i was bored today and went to guitar center to play with some eq's and some of the rack amps and tower speakers i could never afford. well i remembered i want to look at the behringer ep2500 to power what i want for subs in my ht. i talked with a pretty cool actually knowledgable guy. asked about the amp. said he didn't have any in stock and went and look at em online. http://www.guitarcenter.com/Behringer-Euro...544-i1145402.gc , so we talked alittle bit and he pulled them up on the computer to see if any other stores stocked them locally, there wasn't but he found this. if i was willing to wait a week behringer would mail one to the store for $199, $150 off no questi…

I am planning on finally stepping up the entertainment system in my room like i've planned for a while, this is going to be strictly for Gaming and Movies. Luckily for me, the foot print of the room isn't huge.. so a lot of big equipment won't be needed, I can get measurements of the room if necessary. Before I get ahead of myself with listing equipment, right now I need suggestions on the following: *Home Theater in a Box 7.1 or 5.1 surround system w/ a receiver to power them that's compatible with a gaming console such as an Xbox360 and PS3 (The budget is roughly 700.00) *Projector with a really high resolution. (The budget is roughly 1000.00) *Projection Screen 50"…

Just wanted to know what all you Home Audio guru's think about Paradigm. My roommate has a pair of mini-monitors that are hooked up to an Onkyo receiver. Personally, I think they sound amazing. Yet again, they are the only real home audio speakers I've heard. Aside from Walmart specials.

I'd like to build a media PC to use as both my source of music and television. Any recommendations on where I can start looking? If it works better with satellite tv or cable I can do either. I have no idea on the functionality of the slingbox, but sort of looking for something similar for in house use only. My needs are: -Channel changing capability -Remote control -DVR -PC monitor only or TV out is fine as I will buy a TV and build a PC specifically for this purpose

I'm in the process of building a home theater sub using one of the Mach 5 Audio MJ-18s, I'm going with the recommended 8.8 cubic foot enclosure and was using Win ISD to plot the slot port. I have 2 questions, 1.) What type of vent should I use with this? Should I go with the slot vent or use the conventional round vents? 2.) How much power should I feed this sub? Does anyone have a recommendation for an amplifier for this sub? I don't care if it's conventional or a plate amp. Thanks again everyone.

Just wanted to say that I recived my pair yesterday after school, and I am VERY happy with them. The bass response is phenomenal, highs play crisp and clear, mids are smooth and not over powering. I am very happy with them. Price direct from DD isn't to bad either, worth the money I think. Go DD :bigclap:

I am not tooo interesting in using a home theater receiver and all of that. I moreso like the concept of putting a car system in home. Not for the outstanding theater surround sound just for the deep loud bass and all that. I was wondering what places like Best Buy and other places use to run their display system. I am looking moreso for like a brand and model. I am assuming they use power supplies but the only ones i have found are small ones for computers. And if possible I would like to avoid getting a battery charger and battery(s). I intend on at least 1 rf power 1000 5 channel amp. Maybe a large four channel and a 1000-1500 rms sub amp. Im looking for total sy…

If no one remembers, I'd previously tried finding adequate speakers for apartment/dorm parties. I'm back at it again. Most parties consist of two at least 12" PA systems. I have 2 of these: http://powerwerks.com/page/PW50-20.aspx They're adequate, but have little midbass and no low-frequency ability. Something like this: http://www.pitbullaudio.com/live-sound/speakers/powerwerks-pw15ps-100-watt-active-powered-15-pa-speaker-monitor-cabinet.html is more like what you see when you go out. I've also seen double stacked 15" cabinets, but I'm not looking for something so huge. Questions: Should I simply get a sub for the setup I currently have? Should I only add the 1…

I know this is a pretty dumb question but I just can't find the answer with my ongoing research. I plan to build a pretty nice home system for my poolroom so we can listen to some good music while we're in the pool. I've researched for bass I need a plate amp so I'll go with either a Dayton or a Bash. But for mids and highs I'll grab a 4 channel amp like this http://www.amazon.com/gp/aw/d/B0013CH7UK/ref=mp_s_a_1?qid=1310571806&sr=8-1 But this is the part where I'm noobish, how do I make both amps work as one? As in play the same music? Im thinking just connect RCA's but not too sure. Any help is appreciated. Thank you for your time! And for a in depth view of my pla…

I've got plans to build something dirt cheap for my apartment. I don't know if the difference in 5.1 and 7.1 is necessary or not. I am 100% honest with this subject, I know jack dick about Home Audio. Our company does ultra high dollar installations and sells equipment so getting a receiver shouldn't be too much. I'm interested in how to go about building inexpensive driver setups. I think Arrays are pretty damn cool, is this an option?

Hello everyone, I will be getting a new car come this winter and won't be putting my current sound system into the new car. Instead, I decided I would take the subs and box out and put them in my room. I didn't want to use my car amp and have to find a power supply or any of that mess so I've been doing some research and I think I need something like the amp in the link below. First, a little background on my equipment. I'm running (4) 10" SSA Dcons off of a Sundown 1000D. Something funky was going on with the SSA subs when I was ordering them and instead of getting a 2-ohm DVC they had to give me 4-ohm SVC (I may be wrong with that but if aI recall correctly that is what…

So I am tired of my crappy computer speakers and i want to build an MT set myself, passive crossovers and all if I can figure out how, the soldering doesn't scare me cause I've built a headphone amp before. I want some decent cheaper components that I could use in my room maybe on my desk. I was looking at a tweet and woofer that I could use in a cabinet and then maybe in a year or two when I need to move into a new place (and need bigger home speakers) I could throw the speakers from the MT setup into my car and run active. I was looking at the mids and tweet on this page http://www.timbre-audio.com/SeasStandard.html I like those prices hahah and I know more of the cost…

Ok so I should have my mli65's tomorrow and I was thinking about using them in some book shelf style speakers I could use with a reciever off of my computer. I plan on matching them up with some sort of tweeter (any ideas?) And doing the top in some thiner laminate with some rod supporting it. Let me say I suck at sketchup and this drawing is not to scale. If I did the math right though it should end up at 4.5' and 28'^2 the whole way 7"x4". Any thoughts comments concerns? Oh and I will be using 1/2" Baltic only because I think anything more will be overkill. I may end up doing a kerf kut or two too in the port area. We'll see. I play things by ear

Hello. I am currently wanting to redo my setup to a nice bookshelf, center channel, and sub setup. I already have a nice sub so I'll keep that and use what I have now for something else. My budget is about $600 for the the bookshelfs and the center channel. I currently have these speaker stands http://www.partsexpress.com/pe/pshowdetl.c...FTOKEN=79969804 and wish to keep them. However, I think this may restrict the height of my bookshelfs. The center channel will be placed under the TV. Any suggestions?

hiya people i am looking for an 8" woofer that will go into the box of the woofer that came with the samsung HT-Q80 surround system. something that hits, that makes people say 'Damn!! it's only an 8"!!' lookin at a JL because i am not really aquainted with home audio, leaning towards car audio as a career in fact....but if you know bttr, higher excursion, lower ohm-ed 8" woofers that will really put out, gimme a heads up....thanks here is the woofer w/ system. btw, at least 200w rms please and thank you!! http://shopper.cnet.com/home-theater-syste...ml?tag=srch_1_1 7"W x 16"H x 13-3/8"D

I am using Dayton Audio BR-1 kit Dayton Audio BR-1 kit and Dayton Audio DTA-100a amplifier. I will be using these as "computer" speakers. This is not what they are designed for but I am sure that I will be very happy with them. I feel that Dayton Audio is a value leader with all of it's products and is often overlooked. The kit comes with : Two Dayton Audio DC160-8 6-1/2" woofers Two Dayton Audio DC28F-8 1-1/8" silk dome tweeters Two crossover boards Two 47 µF non-polarized capacitors Two Dayton Audio 0.1 µF by-pass capacitors Two 8 ohm 10W resistors Two 1.8 mH 18 AWG air core inductors Four Dayton Audio 6.2 µF polypropylene capacitors …

Right now I have an MJ18-M in 11 cubes net tuned to 20hz with about 650 watts. I was wondering if I would get more output with an 18" Nightshade at the low end in the same enclosure? I listen to music about 15% and watch movies and play games 85%. I have a behringer EP1500 watt amp. Is it worth switching or not? I can get a trade for the nightshade is why I am asking. WinSD shows about the same spl.

Talk to me about the theory behind them. Designs etc... Would the mach 5 mli's be a good driver to use for a line array project. I'm curious and my room is rather short but lets say I have 6 feet to work with unless I built them for my living room. Which because of the layout would have to be a 2.1 system.

Hey guys, Im looking to get a crown xti2002 or a xti4002 Im planning to tune to around 20HZ, now I do believe the amp has a build in LPF, but I do not think it has a infrasonic filter(idk I may be wrong). Any way do I still need to set the filter if I tune that low and the amp freq response if I remember correctly is something like 20-20000 Thanks

Well I just finished my Heathkit AA-151. My first tube project. I had a thread going over at ForceAudio with all the progress and pictures but the site is currently down. I'll get some pictures up in a bit. I finished mounting the RCA Jacks today, which was all that was left of this project. Prior to today I have replaced the PS caps, coupling caps, and any electrolytic capacitor. I also changed any out of tolerance resistors, and I eliminated the Xtal Phono input and replaced to according input resistors to make an additional auxiliary input. All the input Rs were also replaced. I was planning to go through and replace all the components in the RIAA Eq with 1-5% …

alright here's the deal...i have a set of older scott speaker....i want a little better low end so i was thinking about just doing a sub...more specifically and IB.....i was leaning towards and IB15 from AE speakers...but my question is that in another thread someone mentioned using mulitples of 2 drivers opposing each other...why? and i kind of wanted a more general idea of what advantages IB has sound wise

Hey hows everybody doin? well I moved out and next year once im out of residence my parents decided they would give me the 7 year old 56" projection tv plus all the lazy boys in the house. I thought it would be genius to have a decent (awesome sounding first setup) setup. So what i have planned is mostly coming from partsexpress. The towers will be a MTM setup with 2 8" Dayton references (4ohm) and a Vifa D27TG-05 1" silk dome tweeter (8ohm). The crossovers are going to be the dayton 2 ways crossed over at 2kHz. The problems im having since im new to this is what should i set the crossover point to, i dont know how to build one so i have an option of 2 - 4.5kHz in 500Hz i…

I am looking to get one of these projectors in the next week... getting the basement dry walled in the next few days here So far I am lookin at these 4. Mitsubishi HL5000BL $2300 http://www.projectorcentral.com/Mitsubishi-HC5000BL.htm Optoma HD80 $2700 http://projectorpeople.com/projectors/projspec.asp?itemid=22991&itmname=Optoma%20HD80 Sony VPL-VW40 $3000 http://www.sonystyle.com/webapp/wcs/stores...552921665307855 and the Optoma HD65 $1000 that comes with a screen http://www.costco.com/Browse/Product.aspx?...314&topnav= any help would be great

i posted about this on another forum, but didnt get much help..however i have more ideas about it now... i got a set of computer speakers (edifier s5.1) i find the speakers themselves to be more than adequate, and the sub is very musical, however the subwoofer is very lacking in volume and spl, and i believe due to its tuning sounds horrible on certain notes, so i want to improve on it in the most inexpensive way i can... i was thinking i could build a sub in a box with a plate amp, and hook it right up to the sub input on the sound card, then just have the edifiers go to the rest of the inputs..which i know is very ghetto but i think it would do what i want it to do... m…