Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
Hi guys new to this site, and I seem to be having a problem, I have 3 SA-8's been running them for a few months, love em, but the other day, I noticed one of them wasnt playing, and one of the other was moving very little compared to the other, so I figure a terminal connection had come loose, so I pull it out of the box to find that the tinsel leads are burned right through, on both subs near the center, , now when I depress the center I get no scratching whatsoever, and looking through the vents the coil looks prestine, and im very much wondering why this has happened, as I have an alpine pdx m-12 so the subs aee getting rated power, as well they are in a 2.1 ^3ft tuned…
-
1
Reputation Points
- 30 replies
- 8.5k views
- 1 follower
-
-
what would you get? I want something that can scare my friends, will be mounted in w holecab early ford bronco. I'm going for dual 12's just gotto find out which ones for amps I figured i would get dual hifonic brutus 1500, one for each so I can run 1 ohm I'm not going to compete, but I hate the damn sound of my single 12" lanzar (yeah ) hitting the max. I want it loud, but I like the bass to be tight. as much if both as possible I like what I read on the forums about the magnum, but I have a friend competeing here, which says W7 for live
-
0
Reputation Points
- 30 replies
- 3.6k views
-
-
whats up everybody im thinking about buying a 1990 impala to play around with and i was told that i would only have room for four 12' or two 15's. i really dont have a set budget yet but i dont want to pay a fortune for the subs and amp(s) any suggestions? heres a picture of what i will have to work with
-
0
Reputation Points
- 30 replies
- 2.4k views
-
-
I have an 07 ram quad cab. Second time owning this truck. It has hertz energy 6.5"comps in doors and hertz dieci 5.25" in rear doors. I have a jl XD500/3 on comps and the sub channel puts out 300 at 2ohms. I will not change amps. I will be buying that under seat box for 1 10" .65-.8ft^3 depending on which box I decide to get. So I want SQ. Loud is subjective loud to me wont be loud to you all I know. I really want to fill in the bottom octaves is ideally what I want. So what sub for the small sealed box and 300 watts? Pricing the cheaper the better $125 is probably the max cause thats $200 for sub and box and im broke for car audio. …
-
3
Reputation Points
- 30 replies
- 5.6k views
- 1 follower
-
-
http://cgi.ebay.com/Image-Dynamics-OEM-Ove...1QQcmdZViewItem Anyone else get this funny stuff? Oh Ben. . . . .
-
0
Reputation Points
- 30 replies
- 3.3k views
- 1 follower
-
-
Looking at going active for the first time. Will be using a 9887 as my source Probably a kx/sx 800.4, or orion 8004, etc. I'll be mounting the woofers in my doors, not quite sure where i'll be putting the tweets. This will be in a 99 Tahoe. I would like something that i can crank fairly loud when i'm in the mood. But i dont want anything harsh. I'm not completely sure what i want yet... I'm really hoping you guys can point me in the right direction. I'm not opposed to buying used either. The main things that are set in stone are the HU, and the higher volume requirement. EDIT: I will run whatever mids will fit without cutting.
-
0
Reputation Points
- 30 replies
- 3.6k views
-
-
Well im just starting to learn about the car audio scene...i have a 1999 Jeep Cherokee stock and trying to find the best setup i can get for under a grand for just the sub and amp...hopefully without having to upgrade the electrical alot... i think it would be best to go wit a single sub instead of spending more on 2 subs and cheaper amp...figured better amp would be worth it in the long run..so either looking for one 12" or a 15" sub, space ain't a issue...i mainly listen to rap and r&b...basicly im looking to get a nice clear sub that has plenty of bass wen i want it, not looking for SPL just a good quality daily driver...probally going to go with a ported box also.…
-
0
Reputation Points
- 30 replies
- 2.6k views
-
-
Ok I am planning on getting 2 Fi BTLs Dual 1Ohm, and running them to a Sundown 3500D, but I seen the Mayhems and started thinking, I know you cant really hear the difference, but Im looking for the most, should I get two Dual 1 and run them to a 4500D? the box will be 2.5^3, 32-34hz IDEALLY. Electrical will be big 3, not sure if I 1 or 2 XS3100s, should run around 13+V(you get the point), 220A HO alt. Budget : $7500, gotta love the army bonuses.
-
1
Reputation Points
- 30 replies
- 2.7k views
-
-
What are some of the 18" drivers with the lowest Le? Does it even matter?
-
1
Reputation Points
- 30 replies
- 3.8k views
-
-
My choices are a Fi ufo BTL 18D2 for 250 shipped, or a dc level 6 18 with enclosure, for 800. Is the dc a good value? I simply want loud as fuck. Which would you choose, and why? I don't know which is better for what i'm looking for; obscene low end. I am focusing on these two, because they are both purchases from friends, trying to help them out, as well as help my sound situation
-
2
Reputation Points
- 30 replies
- 2.5k views
-
-
A number of folks have been asking when the SPL-15 would be available. Given the existing sales of the current SPL-12, I am finding it difficult to justify the added expense for another driver in the line. I am however, open to doing a small run of SPL-15's provided there is commitment from those folks who are interested in acquiring one (or two or three...). To picture of what the SPL-15 would look like, imagine the beefiness of the SPL-12, only in a bigger version. There, simple wasn't it? So, those of you who spoke of, or asked about an SPL-15, belly up to the bar and let's talk about it. Best, Mark
-
0
Reputation Points
- 30 replies
- 5.9k views
-
-
someone told me to drill ~1" hole in the back of my kick to "vent" it into the floor...would it be better to do this or to actually port in to a certain freq? and if ported is better, what should i tune it to?
-
0
Reputation Points
- 30 replies
- 3.6k views
- 1 follower
-
-
would the single 18 btl be louder then the 2 se 15"s ?? or will the 15's cone area make up for the lower rms ?? sorry im still kinda new and not sure how i would figure something like this out
-
1
Reputation Points
- 30 replies
- 3.7k views
-
-
I'm thinking about getting a set of the XXX components. Anyone have any experience with them? Positives, negatives?
-
2
Reputation Points
- 30 replies
- 3.2k views
-
-
I have a 2 door Honda civic. Bass would be in trunk. I currently have 1 sa10 in a ported box tuned 30-31 hz powered by kicker zx 400.1 I love this setup but I want more bass My thoughts are 2 sa10s ported tuned 32-34hz powered by kicker 1000.1 Or 1 sa15 ported tuned 32-34hz powered by kicker 750.1 Which would be louder in my trunk? I guess this is kind of a cone area vs power thing .. Either way would work for me .. I've been researching stuff but haven't really found an answer so I'm hoping you guys can help me out lol. And sorry if I left out any information. Thanks for reading!
-
1
Reputation Points
- 30 replies
- 2.6k views
-
-
A sneak peek of my new box . It is being built by Dave Marin of High Output Enclosures. It will be bed lined with a red port perhaps. It will have 5.0 cu ft net ,and is tuned @33 hz . I have two options for power . I can continue using two p1000x1's both have birth sheets of 1500 watt's , or I can use a synergy wfo 3500; but it'll have to be run at .5 ohm since I have dual 2ohm xcon 12's . Should sound great either way .
-
2
Reputation Points
- 30 replies
- 4.7k views
-
-
Here are a few vids of my lv4xl10 in 1.7@36 on a saz1500. My camera doesn't pick up hardly any of the flex but I've had a few people on the other forums ask me to make some vids so here they are. Don't pay any attention to that RCA wire running across my seat. The one that was in there broke and I had this one lying around so I threw it in there temporarily.
-
0
Reputation Points
- 30 replies
- 3.4k views
-
-
I realize that SSA are built at the FI buildhouse, but what are the differences between these two subwoofers? The only differences I notice in a SP4 and Evil are the magnets which one is ufo style and one is the traditional stack style, then the SP4 has sandwhiched leads in the spiders. The specs are almost identical, a small change in the T/S parameters. Is the Evil basically the fully loaded SP4 with an extra 200 dollars added on top? Nothing agianst SSA or Fi either way, I just am interested in what makes the evil better to which that 200$ comes from.
-
2
Reputation Points
- 30 replies
- 12.2k views
-
-
Hi all , so I've been looking around for component sets , My goals are , more than decent sounding , and get reasonably loud for those moments I want to sing along and not wanting being able to hear myself (cause my singing isnt all that) . want my EQ'ing to as straight forward as possible so a 2-way will be for me , no intention entering comps but I've got high standards for my own . kicks will find their place high in in the doors and the tweets in a-pillar pods , highs freferably on-axis or close to it . amplification will be a good 200watts @4ohms per kickdriver and 90watts per tweeter by 2 seperate amps as for sound I'm looking for what everyone wants , smooth l…
-
1
Reputation Points
- 30 replies
- 3k views
-
-
I feel bad for only giving it 600 watts right now until I find my new amp. Hunting a PPI a1200 or PC2350 badly for it. But damn does it still sound incredible with just 600.
-
0
Reputation Points
- 30 replies
- 2.9k views
-
-
my budget for sub(s) is $400, I've been looking at either getting two sa-12s, two dcon 12"s, or a single xcon 12" My goal is to get loud, (don't want it for burps and competition tho) enclosure will be ported, I have plenty of room (3-6.5cubes) I'm assuming two sa-12"s would be louder than the dcons and louder then a single xcon. But then again I could be full of s***. I'll be powering it with an sae-1200d (1200watts). What would you do? I know the xcon is an amazing sub, but I also figure there is no replacement for displacement AND i'll only be running 1200watts so it won't be at its full potential. P.S: the only subs I have heard besides mine (10" type-r...) is two r…
-
0
Reputation Points
- 30 replies
- 3.4k views
-
-
Sorry for a long explanation (shorter one below long one), but this is potentially a great find for me, and I could really use some advice... long version: Today while perusing the world of Craigslist, hoping to stumbleupon a rare gem, I found a used 2005 RE XXX 15" in what looks to be a pretty decent box. After communication with the seller, and getting more pictures, I notice that there is some sort of blemish on the surround. Turns out it is something he referred to as "goop" which he put on the surround after it was "rubbed by his dogs bone". At first i was skeptical of the story but i could see the bone in one of the CL pics and the sub is down firing. So its believa…
-
1
Reputation Points
- 29 replies
- 6.9k views
-
-
i'm looking for a new amp for my 12" magnum about 1200 wrms @1 ohm and wanted to hear your guys suggestions. i have a stock electrical system so i want something that makes rated power at like 13 volts instead of 14.5 volts and doesn't strain my electrical system. the most i want to spend is like $350. an amp i have in mind is the elemental designs nine.1, but i'm leary with what i have been hearing about ED. i also have been considering the cadence z1200. i know it's asking a lot but please help me choose. thanks
-
0
Reputation Points
- 29 replies
- 3k views
-
-
after much frustration, a blown amp, and unnecessary investments...my system is finally working...it consists of 2 maw 15s running off a viper 1200.1d, some nextar canadian tire deck, cerwin vega components, infinity rears(now blown, heheh)....i am amazed with it...with a very conservative gain setting, no bass boost or equalization it absolutely pounds, and blends fairly well with the speakers...ive heard alot of bad things about 15 inch subs being muddy and undefinined...but hot damn the maws sound sharp, just as crisp and punchy as a pair of 10s imo...i have yet to actually listen to the system at its full potential, as i blew the rear speakers and im going to put new …
-
0
Reputation Points
- 29 replies
- 3.5k views
-
-
Was trying to see whats the best frequency to set on my alpine mrx-f35 amp. for the alpine type R 6.5's, i listen to alot of r&b and Rap. i like to play them at high volume but with good clarity, my current eq settings (avic z2 HU) and amp settings, they sound slightly harsh or "Screechy" at hi volumes
-
1
Reputation Points
- 29 replies
- 4k views
- 1 follower
-
Who's Online (See full list)
- There are no registered users currently online