Subwoofers / Speakers

As the title states... Im looking for the recommended box sizes for the subs (both sealed and ported). The place where they should be listed on Sundown's website are all blank. Tried searching as well... but no luck. I at least found the displacement on the 10" is .25 Thanks in advance for your help fellaz!

Due to certain events in my life the build with the Chrysler 300 is getting put off, but I still want to have a little more bass in the bronco in the mean time. The only thing I have left to buy for the build in the 300 is two more pm1s, 1 more crescendo 3500, and the wardens. I had plans to sell the Sp4 18 I currently have, and buy one of the Warden 21s. So I bought one of the warden 21 yesterday, but I am having second thoughts considering the warden is more geared towards higher frequencies that what I am used to. Also due to the fact there are no specs posted, and no one really knows anything too helpful about the new wardens. I haven't sold the SP4 yet because there…

Is the sp4 some kind of magical woofer? I mean I been looking for a while for sub that can take a lot of power and sound good and good for daily, so I been searching on different forms looking for options and almost 80% of the time the sp4 is getting recommended. It have to more subs out there that is equal or better THE the sp4 for output and sq

I have two E12s being hooked up to a 800rms amp. I want to wire them to 2ohms but I don't know how, I need a diagram or something.

ok i have been reading back through several posts on this forum and others, and i have some questions regarding ssa subs. from what i read most people consider the icon to comparable to the fi ssd and i have seen people comparing the xcon to the q mostly a few have said its like a bl..is this pretty acurate? i was truly considering a 18 xcon but if its more toward a sq sub thats not really the way i want to go. But if its more like the bl i am more likely to order it. Still torn between a few different subs but keep coming back to thew xcon for some reason. thanks

Just had a simple question is it better to do a slot port box or one that uses an aero port

Is it possible to just replace the surround on a sub, let's say Xcon? Can you do it without having to actually do a full recone?

My choices are a Fi ufo BTL 18D2 for 250 shipped, or a dc level 6 18 with enclosure, for 800. Is the dc a good value? I simply want loud as fuck. Which would you choose, and why? I don't know which is better for what i'm looking for; obscene low end. I am focusing on these two, because they are both purchases from friends, trying to help them out, as well as help my sound situation

Looking into a system for my 2012 Extended Cab Silverado. Wanting the box under the seat. Will not be able to fit anything more than a pair of 10's, but the question i keep pondering is if 2 8's with more breathing room will be more in-line with what im wanting than 10's. Looking for a good street beating system, if an SPL contest comes around my area, ill go compete for fun, but quality sound is a must at lower levels, but I want to be able to feel/hear it when I wanna roll the windows down and cruise. The little i have been researching, the Sundown Audio E8's , Incriminator Audio I8's, Alpine Type R's, and IDQ's seem to always have good reveiws. Im a fan of being differ…

I found a pair of the red stamped steel basket MTX road thunder twelves next to a dumpster outside my apartment the other day; while not being as loud, they sound considerably nicer than my lanzars; they seem to be an ancient model, but I was wondering if anyone could point me in the direction of finding a few more for a low power install for my coworker? http://www.parts-express.com/pe/showdetl.cfm?partnumber=293-352

Is it better to install the tweeters in the dash or somewhere else? For a component set of speakers.

So I'm not sure how much you can tell from winISD by modeling subs, but if anyone wants to help me out and model 2 sets of subs for me in winISD that would be great! Also, exactly what information can you get from modeling subs?

Hello I write from Italy and I'm here to ask for help, I apologize for my English. Would like to know the difference between these two subwoofers, audio sx10d2 both King and I wonder if I can fit them together. Specifications should be the same for both subwoofer. thanks http://postimg.org/image/c4e15rt2r/

I know every sub dont do very well in fourth orders , so what are some subs that will do very good in a fourth order? just to throw it out there,I see some people that are somewhat quiet then on the other hand i see some people with two subs that have the whole vehicle flexing. I know box design play a big part also

I'm putting together a budget system in a Ford F-150 I have a custom box with .69 cu feet sealed available for 2 10" subs. There is a lot of options I've been narrowing it down so far I'm leaning towards the Sundown Audio SD 10 Dual 4. I am going to be running a Class AB Mono channel amp rated at 1400 Watts RMS into 1 ohm load. There restrictions 6 Inch mounting depth 300 dollar budget looking for Dual 4 ohm subs or single 2 ohm subs (Want as much bass as possible from a 2 10" subwoofer sealed enclosure) Thanks for any help with picking the right pair of tens!

I've been thinking of doing 4 DCON 15"s. I need help deciding if I should do s4 or d4 voice coils. I haven't chose an amp yet because I wanted to make sure I was getting the right equipment.

Why does a lot of people prefer subwoofers that is made in the US over others? And what are some good US made subs?

So I have everything but my subs and I'm killing myself trying to decide on subs! I have an Arc 2300se for sub duty, birth sheet says 1400w bridged @ 4ohms. So I'm looking for two 12s, sealed for space issues, separate sealed boxes that is. 700 watts a piece with SQ being a priority, some Xmax for output maybe, as I do like my bass and want to be able to flex my muscles. Full legatia se 3 way front stage to blend with.

I have been following the V3s for a while & have emailed 2 different emails a few times. Anyone know how to preorder them or when they are coming out? I may end up going with the AB XFLs instead

RE's website claims 88.7dB/1w/1m SPL for the 10" SEXv2, but only 84.4dB on the 15" version. 1) Wouldn't that mean that at any given power level, the 10" would be louder? 2) That sounds unreasonable, so either I'm wrong or there's a typo? http://www.reaudio.com/products/woofers_sex_v2.php

Has anybody used these? Interesting specs - XBL^2 motor design, copper coil, 3 shorting rings in the motor, high xmax. You can pick two of these up for $519 plus shipping(?). For car audio use they look like they ought to be good SQ subwoofers with good low end extension in the right enclosure.

Hey guys, so I'm looking for some pro input. Mids/Highs - EJS Audio Full Size Horns under the dash *powered by Linear Power 2202 (mod)@ 110 x 2 @ 4 ohm load. Midbass - Undecided at this point, might even be running ID8v1 or v2's in the doors *powered by Linear power 3002 (mod) @ 175 x 2 @ 4/8 ohm load. Subs - This is where I'm a little stuck. I'm trying to snag as much cone area as I can because we'll be in the trunk running two drivers. I'm probably going to be running 15's because I've got 3-5 cu ft to work with and I'll be running sealed. I know that running one driver ported will get me more output, but some music I listen to has very fast bass transit…

First if would like to say hi to everyone on the forum. I am 34 and have been buying stereo stuff since before i bought my first car. never got into box building or fabrication but i know a little bit about a thing or two lol. Ok my lasst set up was a single ssd 15" powered by a Memphis 400watt 2 channel amp...i know not enough juice by the us amps i had been running fried. Well i sold that a few years ago and looking into buying a new set up for my 08 gmc envoy. Its not going to be for competing unless some little punk tries being stupid and i have to show off a bit. But i am needing help on a choice. i am trying to decide between 4 different subs right now. all are du…

Hi guys, I have a very good deal on aDigital Design sub. It's a 9515, very cheap I've never heared any, in a correct box. I don't know how it will sound in a 3 to 3.5 ft3 ported box. That is what I can fit in the "trunk" of my Toyota auris. the Auris is like a little bigger Corolla hatchback 4 doors, with a very small hatch. I still have my 12" BTL n2, but I have a buyer...he's in the starting blocks, waiting to take it from me !!! Originally I was debating between an SSA Zcon and an AA Mayhem, but the DD9515 came and it costs "only" $300 locally ! I think I can't pass on this deal. My amp is a sundown saz1500. I saw some saz 2500 at db-r, but the DD is rated for 1…

Will a clipped signal cause the coils to run hotter and possible damage them?