Subwoofers / Speakers

The title was supposed to say "I got specifics", but apparently that was too long, LOL. I know these are always awful, but I swear I've done my reading/searching and I'm not just saying "OMG U GUYS I WANNA SUB 2 POUND". I am, however, criminally indecisive so I might need a boost here. I drive a 2010 Honda Fit. If you've seen one, you know there ain't a lot of space back there. I have a 12" JL w3 in a PWK designed box (built it myself, woo) and a 2.2cu ported box takes up this much space: So space is kind of a premium here. There's maybe an extra inch of depth I have but that's it, so nothing that'd need a big box (which is why I'm sticking with a 12, I'd need to strangl…

I have 2 18" Zcons I recently got, and I just realized the baskets are slightly different. 1 sub stands a little taller then the other, one basket has the option to be a quad terminal, and has different cooling. Wondering if I can still wire subs together to 1 amp with no worries. All coils read 1.0

Been awhile since I've been on here. Had to put my system on hold there for a while. Finally got my Fi Q installed about a month ago. I will have to update my build log here soon. Anyways my Q is rusting all to shit. Like I said it's only been installed for about a month. Which has me wondering how bad it's going to look further down the road. Since my box has a plexi viewing window its quite the eye sore. Was thinking about picking up some rust remover and seeing if that takes care of it. Is there anything else I can put on it to protect it from rust?

Hi guys I'm getting ready to do my first full system build and I'm looking to be clean and loud.My question is would I be able to run 2 ssa gcons safely off a crescendo bc 3500d or should I just go ahead and buy the icons?

by using the re audio box calculator and attempting to account for the displacement of the sub listed on the ssa site ive come up with these specs i would like thoughts please and thank you im going for a mix of rap country and rock on probably 400 rms i figure once i get my components my midbasses would be mainly responsible for the kick is that correct where as if that is the case i would like for the sub to go low and hit the deep bass my available area is w38in h 15.5 in d 18.5 in the re box calculator says 36.5x12x13.5 with .75 for mdf would give 2.249 ft3^ that is with the ssa listed sub displacement of .14 included it also shows port height 10.5 width 1.5 length 1 …

Hi, so I'm doing a build of two icon 15's in my dodge Dakota crew cab, I have one set of amped hertz hsk components in my doors and just got a second set and wondering if I should put.a second set in the front doors or the second set in the rear doors? I'll have them both amped with about 75rms each. Looking for sound quality and what will have best staging Thanks,

What would be louder an sa12 in a tline or a sa 15 in a lport? Amp suggestions?

Hey i am thinking about picking up one of these. I was wondering if these ever come up used? Not really looking to spend 400 on a sub right now but if i have to i will.

I have a 2010 silverado. I currently have 2 10" cvt in a Probox but I'm looking for something much louder and especially DEEPER. Looking for atleast 12s. I know a guy that makes custom boxes so i mighy be able to fit 13.5. Money is not a factor. also if you could link me to amps that push is great that would be appreciated. Thanks in advance!

So yet again for the umpteenth time I am changing my sub bass setup. Now that I have an excellent sounding front stage an over powering sub system ruins it. My front stage is also very loud, loudest front stage I ever had. Although I am not looking for the output I have had in previous sub bass setups it still needs have a volume level to match my front stage. One thing I can not have is a large enclosure. Largest possible would be 3 cubes gross. I am thinking about going IB. I would not have to mess around with an enclosure and from what I have read they are the most accurate sounding sub bass types. I keep eyeing up the Fi IB3 series but what other options are there? M…

hi, i am looking for box design for 1 pioneer 309 can anybody provide me with one ported box as i have no skill how to do it correct thnx

I used a pair of Skar IVX 12's for midbass? I came across an extra Two Channel amp, and bought two fifteens before my Skars came in, because I'm the worst impulse buyer, ever. Would it even work? I mean, setting my HPF on the fifteens to like, 60 hz, running the skars from 60-100, and then my components 100+? All of them on different amps, of course.

Hey everyone. Just wanted to know which sub do you think would have great spl and good sq. Between Mayhem 15 Ascendant Audio and a 15 Zcon. Thanks for your input.

Hey everyone, I just wanted to get some opinions on these speakers for my fronts (6 1/2") and rears (5 1/4"). http://www.ebay.com/itm/HITRON-5-25-5-1-4-SPEAKERS-4-WAY-PAIR-300W-HS-5254-CHEAPER-THEN-KENWOOD-ALPINE-/120972470424?pt=Car_Speakers&hash=item1c2a856898 Now before anyone says anything about the "max" power RMS rating, I'm not looking for that. I'm just looking to replace factory speakers without any hook ups to amplifiers or anything of the sort. The reason being is that the ones that I have now with the factory radio already play distorted, and I'm almost 99% sure that when I install a new HU in that they will pop. If anyone has any other suggestions or spea…

Ok I just got my Xcon 18 sub installed and am having a frustrating issue. At higher volumes and low tones the sub rattles! The moment I noticed it started I looking for the cause. I tried tightening the screws and adjusting the seal just in case there was an air leak and quickly figured out that was not the issue. I then thought maybe it was the box (a 6.5 cube ported box) but was able to conclude it was not. I then decided to push slightly with my thumb on the center of the dust cover while the sub was playing hard (and rattling) and the noise stopped. Is my dust cover loose? If not, what is the issue? The sub is brand new and literally just installed. It sounds so nasty…

So I know, I know.... "no VS threads" .... Not totally sure whether this completely falls under that but here we go.... So, I've realized I made the wrong decision for tweeters in my car... LPG aluminum tweets .... Cannot be crossed lower than 4k and that is with lower power/lower volume.... 5k is much better.... This will not work for me anymore... I've learned that now and need to move onto something better for me... Currently using my Pioneer HU for active setup and going through a MB Quart 4.125 .... I am looking at these guys: Vifa NE25VTS-04 Morel CAT 378 I have been eyeballing the Vifa for quite some time now but not pulling the trigger just yet.... The Morel c…

Whats a good amp for 500 rms at 2ohms just got big three done and stock alt in single cab. I may just be a noob but ia it better to run at 2 ohms rathrr than 1 to not tax the hell out of my electric

Mine sure does sound sweet powered by a aq750.

What are the advantages of running 1 8" mid versus running 2 6.5" mids up front? I'm looking for clarity, loudness, and width (of the stage I guess? I don't really listen to much that requires great staging). I can do the work to fit the 8 behind the panel but it will be up high. If I do 2 6.5's then one will be in the door and one in the kick. One 6.5 isn't giving me the volume I need...well it is, but only when it's crossed at 120+hz which sucks. Doors will treated and sealed minimally (Not keeping the vehicle for long.) Right now I'm not looking at any drivers in particular. I'd rather use passive sets (using only one tweet) because I don't have good enough x/o's. I ha…

I just recently bought a pair of IVX 12's on impulse because of the sale, ha. They're rated at 300 rms, conservatively (As stated on their website). I've also heard that Skar is just booming like crazy, and getting all sorts of comp wins. Anyways, anyone here have any experience with how much clean power the IVX's can take?

I have a 1998 GMC Jimmy. I'm running 2 Sundown SA15's on a Hifonics BRE1600.1 I'm getting ready to start a new box because i realized a measured the last one wrong so i only have about 4.5 cubes net. Clearly not enough for the subs . Here are my maximum dimensions. I can go 37 wide THE'ts right on the wheels wells would probably have about a 1/4" on each side. I would go 25 deep. Gives me about 7 1/2 inches to the back hatch. 24 high gives about a foot to the roof. Any idea's for a box. Probably just gonna stick with 35hz and I want it to be very loud but i want to be able to listen to music not just do burps. I think that's all the needed info right?

Single cab 2003 tacoma. What i have to work with is length: 46 inches depth:11 inches height: 28 inches could go higher if need be and have bench seats so the sub would have to go in a bottom corner. Any help is much appreciated

is the re box calculator a good tool to use?

I'll be upgrading my system next summer but I'll buying the gear over the winter so come summer it will be build time. I need help pick out subs and some components speakers. As for what vehicle its going in, I'm not sure yet I'm planing on buying a second car also next summer. I'm just trying to have all the gear ready for when I do buy a car, but most likely will be a 2 door car as it will be my car to go to work mostly. I have decided on the amp I will be picking up over the winter, Crescendo BC2000d for the subs and C1100.4 for the mids and highs. Depending on the car and if I have room, I may also down the road pick up a second BC2000d. For subs I have been looking …

I am wanting to do two 10 inch sundown sd2 series. I have never built a box before but helped my friend build my box for my bl in my other car so i know the basics.how do i upload pics of my truck. It has bench seats. L=46inch w=11 h=28 could go higher if needed any help is greatly appreciated