Subwoofers / Speakers

Looking at changing a grand prix from a 15" L7 to two 9510-4's. The amp is a kicker 1000.1. The kicker L7 is ported and in a box I guessed to be 3cf. It is under the rear deck and does not come behind it at all. Using kickers rec. tuning I modeled it and the 2 9500's. I found that the L7 is louder but doesn't go as low. If I increase the power to the MTX's they can get just as loud . Does anyone have a thought about this? Are the 9500s a upgrade over an L7? I have never heard a L7 but will hear this install on Friday. I'm just trying to get a better idea what to expect.

So today I was all set to order my crescendo 2000 . I had planned on a single xcon 15..... anyways. My wife needed me to run to the store and right when I was leaving a person accepted an offer on a mmats 3500.1. Now I have no plan. Are there any 15 subs that run on 2750 daily and can play in a 3cf box?

Does anyone own these components ? The have a closeout deal on these only a few bucks more then the ctx models

well my buddy bought the solo x 10's for 350 plus 75 shipping. he ran into major car troubles and asked if i wanted them for 300 no questions asked lol. im sure most of u know i totaled this chicks car a few days ago and have fines to pay SO i sat down with the parents and they agreed to lend me the cash for them ( thank god) i have to pay back $50 per week plus $10 a week intrest so its not all that bad. so i got the solo x's for $360. iv sold my mtx 1501d ( got it fixed) and am using the money from that for a 220 amp alternator. ill also be getting 2 optima yellow tops in the back.so now the big question... the subs are dual 1 ohm, so would i have to get 2 zx 1500.1's,…

In terms of SQ, are these two the same? Amp is Hifonics BRZ 1700

My idea, 25Hz tapped horn using Kicker CVXs, was stolen by Kicker, by Deon screen name dB-Kicker. I didn't do any of this design work or build, it was just an idea, but an idea shared between 2 men in private messages. Since my private message turned into a very public build, I took it upon myself to do the same...share private message information. I made a comment/reply in his thread about it, he ignored it and sent me 3 PMs confirming guilt. I gave him a day to reply, then started my own thread. It was ignored, then deleted, so here you go! KW Jordan Powell Private Message 08-17-11, 10:46 PM dB-Kicker Member Join Date: Oct 2008 Location: Stillwater Posts: 75 Re…

08-17-11, 07:25 PM dB-Kicker Member Join Date: Oct 2008 Location: Stillwater Posts: 75 CVX vs Solo X -------------------------------------------------------------------------------- Solo X's.... Aren't going to be around much longer. And the CVX's are a Natural to TH's - the X's didn't like TH's.. The 4 CVX 15's met and exceeded the performance of the X's in every way as TH's vs our 'large low tune" recommended ported enclosure for the X's at max power with only 1kw per driver. IOW these are a FAR more accessible driver - and system combination. The system requirements lead it to be something 'everyman' could aspire to. Did you see that F/R? Un Equalized. 135d…

Im building a ported sub box for two 12"Dcon D4's.im in to SQ more than SPL, witch would be better a 3.2ft^3 iternal volume tuned to 30hz with 45.in^2 port area. or a 4.0 ft^3 internal volume tuned to 30hz with 60.in^2port area? im new to building ported boxes so any help would be a help...lol... thanks,,,,,,PS im runing a RF T500-1dbcp

my buddy wanted me to ask u guys. is 2 solo x 10's (just subs) for $300 a good deal? i told him to jump on it but what u all think????

like the topic says, i'm looking to do a budget build. I already have an old 500/1 amp. I'm looking to pick up a used 10w3v3 on ebay for like $110. I want to build a 2.0cf box with a 4" port tuned to 32hz. Question is: is the 2cf box and 4" port too big? or am I still within the realms of "should be ok". I'll be giving it 500 watts. What it's rated at. thanks. PS: If anyone can name me a better sub for around $120 new or used, I'm still willing to listen.

I recently bought a 2000 s10 from my grandma. It was my grandpa's truck who passed away over a year ago. It has less then 40K miles on it and hadn't been driven more then 200 miles in the last 4 years. Anyways, I've been thinking about a new system for it. I pictured in my head that it would be cool to build a shelving unit above the sub box in the back of the s10 (extended cab with 3rd door). Would include two open bins on either side of truck, with open space in between with metal rack to bungie to. Not sure if you can picture that but I think it would be useful. I've narrowed it down to using woofers no bigger then 10", due to height. Currently I have a 12" xcon…

anyone have experience with these looking for how they react to port area do they like a lot or little ? i was thinking about running 2 of them in 2cube each box tuned to 34 or 33 htz with 2 4 in flared ports but using the aero ports 4in its either 2 which is like 6.25port area per cube or 3 which is 9.30 port area per cube Any advice will be welcome thanks reggie

Alrighty, Sadly it looks like my Infinity Reference 5.5" speakers are dying. (guess it more sounds like that...). Anyways, my one speaker sounds fine.. but the other one is starting to sound quieter and not nearly as sharp and i think its time to switch it up a bit. What i was looking at were the Bravox CX50CF coaxial speakers or the CX50K components.. My first main question i guess is from the SSA store do these come in pairs? or are the speakers priced individually. Also iv heard good reviews from other Bravox speakers but i havent really found any reviews on these particular ones. Obviously im looking to stay in about the same SQ range as the Infinity's, …

Hi there. My son is contemplating an upgrade to his sub. He has just one 8 and was wanting 2 SA8s. Then we talked to woofersetc and they suggested 2 SA10s. He has a trailblazer so enough room. Hi is running a Cadence ZRSC9 running 2 channel to the fronts and other two channels bridged to his current sub. He is just looking for more bass, doesn't really want to build a box. Input appreciated. SuperDaveTX

how much do these go for these days in good working order

Alright guys im looking for a little help. A guy i work with has a 97 single cab ford ranger is wanting to get a little bass in his truck. there isnt a lot of room behind the passenger seat(havnt had a chance to measure), but what would be a good shallow sub that would work well in a small sealed box? i was looking at the new sundown sd-2 but im not sure how well that would work. any ideas? THANKS!!!

Sup guys just sittin here thinkin about what speaker setup I'll have in my sentra. Nothing too much or fancy but better than stock and budget-minded. It'll be coaxials and I've researched for some good budget speakers like pioneer kenwood massive audio planet audio etc. The other day I was at walmart and I checked out what they have for sale and I saw pioneers! 6"1/2 pioneer TS-g1643R's 180w max These were actually really nice looking (I asked to look at them) But the fact that it's from walmart sort of prevented me from buying.. I mean pioneer is pioneer right? Where it's sold doesn't really affect it's quality.. But out of curiosity would you have bought them and p…

I Order an Audioque HDC3 12" sub and I was wondering is a 3 cubic ft box tuned to 35Hz is good? I really want deep bass and I want to know if this well get loud? It will be powered off a MB Quart onx1.1500d.

So as most of may know the car that is crashed does not have the speakers or amp....so imma buy these things. for the rear imma go with 6.5 coax's and in the front imma go with components but the hard thing i am finding is which ones i am on a 150 dolllar budget on speakers. I found these 3 way speakers but i dont know if these are better or worse than the regular 2 way ones. If i go to 2 way imma go RE Audio Components not the xxX i have had them before and i liked them. I can get all 4 speakers for 150 and 100 for the XT800.4 amp from RE /US amps i had this setup before but now im just trying to figure out if the 3 ways are better or what? Or maybe you guys have better …

After looking into a bunch of speakers , i would love to get the Hetz but cost is way too much . i think i may go with the BEYMA SCK65 . Just wondering are they worth it being there made in China and i don't understand the 25rms rating on the tweeter , ? sounds very low .

Alpine SPR-60C Any opinions on this speaker and does it compare in quality to the high end brands like Hertz,Focal etc...?

I have a audio pipe amp 1300 amp rated at 300W RMS@4 Ohm (<1% Distortion) 600W RMS@2 Ohm (<1% Distortion) 1000W RMS@1 Ohm (<1% Distortion) and a sealed box for a 12" woofer at about 0.9 volume What sub would you guys purchase under 200$$ Link tp my build

I've been looking online for subs. Since the best buy near me doesn't have anything. Here are some of the ones I'm looking at sub 1 sub 2 subs 3 subs 4 I'm on a lowish budget, and I'm trying to get an enclosure & amp combo. I obviously want the best for the buy. Post links of ones you think are better, or which one would you suggest. Thanks guys !

Hey Guys I'md so exited I will be picking up my IP G37s 6mt on Wednesday and the first mod I want to do is add an amplified sub enclosure to add some bass to the Bose system. I am looking for clean sound with a good amount of kick for a budget while I save up for my full audio system upgrade. I have listed my 2 choices below with links any advice would be great. Rockford Fosgate R300-10 Rockford Fosgate R300-10 500W JL Audio Subwoofer + Realm Amplifier Bass Bundle 500W JL Audio 12" WX Sub + Realm A200.2 Amp + Kit + Subwoofer Box