Leaderboard

Who wouldn't want to have this guy at work or home or even at the mall???

It sounds like your sold on psi before even making this post asking for opinions? I wouldn't extend the leads myself, not a fan of band-aids, I would just wait for the recone.

Im stoked for them as well Put the last 2 spacers in and tightened things up as much as I could. Its very hard to get to the top two screws to fasten the rack in place. Takes quite a bit of patience with a wrench and awkward angles. Hooking everything up once the project db adapters get here. Happy Easter everyone!

Follow the noise troubleshooting guide. It will take you step by step through the process.

I would love to see an update

They now need to take their time and come up with a better name and logo.

PSi parts are garbage. Do not deal with them. Get Fi parts, they are multitudes better.

No, that has nothing to do with it. Nor having the speakers wires by the RCAs. There is a sticky at the top of this section for troubleshooting noise: Noise Troubleshooting Guide.

I wish win could get me some dirt cheap equipment... lol

Here is a few more pictures. I added the spacers to the sundown amp but still need 2 more spacers for the rack to sit perfect on the chassis. **** hardware stores closing early on Saturdays... Really liking how the amp rack has turned out so far. Love how it sits slanted for a professional look and I should have just a perfect amount of room to plug everything in at the bottom. Here you can notice plenty of room for the trunk arm and spring to slide freely

Funny how kids change the way you do everything in life.

gorgeous fish tank

Do you have a traction/sway bar installed? I missed it if you already said. As of yesterday I have bigger sway-bars than stock. Some came with, some came without a rear sway bar. Mine didn't have one. And I will probably build a traction bar after the ugly wheel hop in deep snow.

did you get a demo? and thats what a team members car IS FOR!!!! thats fucking awesome

did you get a demo?

Nice scores, Xcons hanging in there with Nightshades I see.

You're sure about that ? With such a little system I thought it would be possible. Maybe not for hours of play, but it can be done on some cars. not on mine though ! OP : you can be good, and safe with a smaller amp for those little monsters ! IMO

I agree but I'll raise my post count in the mean time

Beastly looking XLs... Loved my original pair of XL 12s. Sure you will enjoy those.

I Finally got my double run of 1/0 put in. With only the one run under the carpet it was already breaking my trim pieces. So I went under the car. Made a bracket to mount the two waterproof fuses under the hood.... Had to bend the bracket..... with the air filter tube re-installed Another view.... looking from the front of the car..... from the back of the car....notice where the dip up is, Thats the center of the car where it scrapes so the wire should be safe. I am also installing a fuse at both ends of both wires..... Coming into the trunk....ignore the exrta hole, it has nothing to do with anything.