Leaderboard

SAX-125.4 Hmmm... this sure does look small, huh ? Tested Power Factory Spec : 138x4 at 4 203x4 at 2 438x2 at 4

BJ, is that you driving with Steve in the passenger seat?

Yep, that is what I need to do. Work warning yummy titties are shown! http://www.youtube.com/watch?v=NXpO2wKTzws

Just got my first pictures of the first completed prototype of the new SAZ-1500D v.3 model... so the cat is out of the bag on this one! As the model that got us started it is only appropriate that it is the first model to be shown in the 2012 trim! Newly tooled 2012 casing -- you can still tell it IS a Sundown amp but it is a refresher and also narrower. The FETs are mounted at a 45 degree angle to shrink the width AND avoid spring clips (which I've never liked). So we are getting the best of both worlds on that. * Fully custom tooled boards for all of our new 2012 models complete with fans. More photos to come as I get the other models done! Yes... you do see 16 power supply FETs in this amp along with four transformers. * We will use the fancier RCA plugs for production. So this has many things I've been asked for (smaller size and fan) and MANY improvements to design that were really just personal goals of mine. The entire line is stable to 19v as well. Power testing to come when it arrives... the SAX-125.4 model should be showing up within a week or so as well. Pictures of the completed prototype coming soon too!

I see now you typed it correctly.

Picture of said amp!!

You know what I have to do here don't you? That's right, not a damn thing! I feel your pain! Post away!

It was perfect and simple the way it was. Now it sucks in every way.

going going.....gone! It's not getting bonkers bro, its past bonkers.I have set my set myself I hefty goal though....streetbeat 4 world record holder before the end of the season. I don't even compete, but I notice a bunch of people going for that SB4 record. Most people I have seen are dropping down a class to run in SB4. Should be good as I have seen some good numbers out of people. Good luck Steve. Coming down from what? Sb4 is the highest consumer class. Sb5 is just for shops that can't compete in sb4.

Blowing both your side mirrors clean off the car. True story.

sorry if I came across as bashing . Just trying to help .this should be brought up in a diff section and thread its nothing to do with cresendo. its setting up radio and gaining amp.

I like blue and carbon fiber.

ripping sheet metal and breaking glass needs to be added . also very tangled hairdoos

Hey gents, posted my p9 combo for sale up here and DIY. If you haven't checked it out you should. Send me a PM if you have any questions for me. Hope everyone has been doing well.

Yes the A4 does have a center. But it still takes some modification to get the Dayton 3" to squeeze in nicely. Got quite a bit done once my speakers came in. I replaced all the dash speakers which are definitely the hardest to work on with the window being so close. Took a total of 5 hardware stops before I had everything I needed to complete the job. I replaced my center speaker with a Dayton 3" full range woofer and changed the two tweeters with the Vifa dual ring tweeters. For the tweeters I added about a foot of extra wire for if I decide to place the tweeters in the A-pillars later on. I fabricated speaker mounts out of a vinyl tile I got at home depot. The material actually worked out really well cause I had a wooden looking top for nice aesthetics while the bottom side was sticky so it wont budge at all when screwed in. For the center I had to modify the bottom under the speaker to get it to fit nicely. I also had to stack 3 layers of the vinyl tile to give it a little extra room. I made all the baffles by hand so it was tricky and took a while to get everything perfect. 60 grade sand paper helped me grind the center circle perfectly. Only got to listen to it for about 1 minute but it already blew my socks off. It sounded so much more natural and clean and im pretty sure It got even louder than the factory speakers. I have to test it out for a longer period of time and see how the factory amp responds. So far I'm very happy with the results. The Dayton 6" woofers don't come in till thursday but I wont be able to install those till I get my deadening material from SDS. Here they are :fro: Going to be running a sharpee over the silver screws. At the right angle and right light you can see them shine through. Easy fix though

Someone said the old ones look outdated? ~Facepalm~ I got a SAX-100.4 for sale. Who wants it? It's to outdated. lol

Part of it is just resonance. Same thing that creates rattles, buzzes, and other obnoxious anomalies.

http://www.youtube.com/watch?v=jdhmLUnexuc&feature=related

http://www.youtube.com/watch?v=Ejm6jn9AFA0

So you just built a box? No measurements? Just went for it.... I REALLY hope it isn't ported.

When I saw red for the last post I figured electronic/house was in store. Queen - Radio Ga Ga

Power handling may increase in a sealed enclosure, but don't be afraid to use less power then your amplifier is capable of. Head room is your friend.

Team SSA will not be responsible for erections lasting longer than four hours. Team SSA will be responsible for Haters hatin' Team SSA has noted the following side effects: -temporary loss of bladder control -sudden uncontrollable orgasms -blurred or loss of vision -excessive attention from complete strangers -rhythmic tremors -and in some reported cases Team SSA has noted severe colon evacuation in older individuals. Please contact your dealer if you want to experience these symptoms. Give your ears an orgasm, they'll thank you for it.