Leaderboard

are these your song's, open access, or are you selling someone else's work?

The way I see it is these guys spend their hard earned money and more importantly their time on my product I need to try as hard as possible to ensure they know they are supported and appreciated. One of my most important goals is to cater to the needs of people who sometimes without even thinking about it has the biggest impact on sales for my company. As long as my budget allows and it is not against any comp rules I'll be here to help.

I figured I would start this log since I have been getting asked what I've been working on. This has been in the works for a few months and I'm still collecting equipment. All equipment under the window line and behind the b-pillar. No blow through. Amps and electrical in bed. Not to exceed the heighth of the bed and 36" back from the front of the bed. 92 Chevy S10 ext cab. 3 15" Ethos (stock built) 2 B2 Zero.7 amps 2 Mike Singer 350a alts A few super capacitor banks. No batteries. Questions, comments, rude remarks welcome. ## rebuild on page 52

I've looked at the 4.3 in depth. I would remake the whole braket. It would be pretty nutty, but thats the only way i see it being done. I dont really see where an add on braket could be placed. Lemme look some more.

How about this? Plastidip aluminum.

Yeah I also thought of that and that's exactly where they are is mounted under the rear deck through the inside of the trunk. Could always just put something in rear door panels then. What would be a good mids and high build? Not wanting to spend an arm and a leg really but want a decent quality. skip the rear deck and rear door speakers all together. just get 1 set of components for the front. amp them and look into sound deadening. 1 set of decent speakers will always sound better than several sets of shitty speakers.

Anyone that is on instagram can now follow team pics @team_iak thanks to Senchez Thanks lil bro!

If you want people to take you seriously then you better rethink your policies.

In a vehicle with that kind of factory speaker setup and your first set of new speakers I would suggest going with a single set of components and a two channel amplifier to start off with. You can install the woofer/mid of the component set in the factory location of the door and put the tweeter up in the dash where the factory tweeter/4x6 is. The Incriminator Audio 6.5" components seem to be a well regarded set by the folks who've used them. Now the IA set may be 6.5" but it's not hard to remove the factory plastic baffle the speaker mounts to and make some custom ones for the new speaker to fit the 6.5" size. Not only is it not that difficult but the work involved is well worth the effort because it is MUCH better for the speaker to be mounted to a solid surface than a flimsy plastic one. A flimsy baffle can cause unwanted resonances and rattles coloring the sound and a loss of output due to the loss of acoustic energy. With a solid baffle the speaker will have better bass response and cleaner midrange along with increased output. Most GM vehicles with speakers in the doors usually have a plate with a tweeter mounted in it up in the 4x6 locations in the dash board. If that is the case just remove the factory tweeters from those plates and install the aftermarket ones. If that's not the case it's not too horribly difficult to build and mount them in plates yourself. You'll have to run your own wires from the amp to the crossover for the component set, then a separate wire for the tweeter and the mid to each of their respective locations. Mounting the crossovers just under the dash or behind the kick panels will make it a little easier to get the speaker wires to those locations. There's a hundred different ways it can be done though and whichever you're most comfortable with is the way to go. Don't worry about replacing your 6x9's. Having speakers play music from behind you ruins the sound stage and confuses what you're ears are hearing. Generally recordings are made and designed so that it sounds like the listener is sitting in a seat in a room with the band playing in front of them. If that recording is of remotely decent quality settle nuances that give away instrument placement, singer location, etc. are all reproducible through the speaker system. All that recorded information gets messed up and muddied when the same frequencies are playing from different sources in different locations. You could do like most other people do and just buy whatever coaxial speaker you find cheapest that fits each of the factory locations and replace them all but if that was really the best way to go I wouldn't have gone through all the trouble to explain everything above.

Not sure. I want something extremely nice and professional. Not some cheap dickies button up shirt.

Ferrari knock off anyone?

He drew my big arm piece. Thanks for the kind words J. I look forward to putting the finishing touches on the one sleeve and jamming out the other arm! Aaron, I wish I could of done the tattoo for you also. I have visions of a b&g super realistic one up the back of the other arm! As I started tattoo'ing out of enjoyment and to be that guy that tatt'ed up all his friends and family. I love leaving a piece of me on people for life and also their souls. I am honestly considering doing another one on the left arm. This one took 14 hours. But then again, a sleeve is something in the back of my mind also. Not to say homie was slow but I personally could of done it in quite a bit less time. I am VERY deliberate and don't mess around as time is money. With that being said, I will tell you the same I told Jordan. A plane ticket, rental car and hotel are probably less than paying someone to do 8-12 hrs of tatt work on you as I would do the work for free if you make it here. I can't accept free work. Meh. I usually tell friends and fam to just pay enough to cover supplies and overhead. I would already have done a cross country trek to ink and meet all the SSA brothers, but life has not permitted it. Aaron, Take the time to take this man up on the offer. I am hoping to make the trip in May or June for my next session. Bring the lady along to see CO too. J If its meant to happen, it will happen. The offer is there for you Aaron. I know how you are about taking things for free as you wouldn't even let me give your boy Lego's without giving something in return. Which btw was worth about double what I sent you.

i neeedzzzz me some its moving alot on only 500 watts wow

JBL A6000 GTi

I sell flash drives with 270 bass enhanced songs for about $35 each.. It's mostly rap though, with a small amount of dubstep. Less slowed songs than decaf and a hell of a lot less Gucci Mane lol...