swift

Good luck and I hope to hit my first 50+ at that show

With my pods and kicks looked that good, lol

Looks great

DId Aaron or Mark come on here and say, "JP was banned for this or that?" No, so when you say, "It was made very clear why JP was banned," that is another assumption, hence my foot in the mouth comment. Yes many people are aware of some of the reasons that led to his banning, however there may be but two people in this thread who know every reason. Everything else is purely speculation. I havent recieved a warning or pm or anything? All I do is share my videos, I dont troll or anything That is just it, you only come over to spam your D4S logo all over your videos. We do not approve of this type of behavior. You are only here to promote you own site. We don't let anyone else get away with this, and you shouldn't be any exception. If you remove all of your logos etc in your video's we have no problem with you posting them here. I am sure you can understand this, it would be like us coming to your site simply to promote our store or subwoofer line with out paying your vendor fee's etc. Especially since you have now moved up to "competitor" status selling XS Power, I am sure you see where we are coming from. We protect the house we built here. Maybe you should remove your foot? Lol

Not even remotely close. Seems like the exact same thing. Why because crazy hair doesn't have his own site YET? Do you not think his goal is the same thing? At least the JP vids were decent. I thought this was a place to voice your opinion? Seems like only one person here disagrees.... If I post ten videos of my bare white ass while wearing flip flops with a beeper will that be ok? You stuck your foot in your mouth right there. You, just as others have, made an assumption. Admin bans people. Admin does not come out and make a post and say why they ban people, yet people THINK they know. This guy has done nothing wrong. He doesn't cause any trouble, just posts his videos. People assume he is doing it for whatever reason they want. He's doing nothing wrong, violating no TOS, unlike another previous member who keeps being mentioned. Now, feel free to post whatever and however many videos you want to as long as you don't violate the TOS, and by posting your bare white ass, you would be in violation. Not quite sure how I stuck my foot in my mouth? Lol Is the guy a supporting member? Is the guy a approved Vendor? Because he sure does promote his LLA in every single post. It was made very clear why JP was banned, he was becoming a competitor or at least in the eyes of the powers that be, how may views or dumb kids that follow before crazy hair does the same thing? I highly doubt he would be remotely capable but still, no different. Honestly I don't care, I just said his videos suck. I'm not some Internet sheriff that is even suggesting what a site should do. Good luck and I will stay out of this thread from now on but the fact remains, his videos suck.

Not even remotely close. Seems like the exact same thing. Why because crazy hair doesn't have his own site YET? Do you not think his goal is the same thing? At least the JP vids were decent. I thought this was a place to voice your opinion? Seems like only one person here disagrees.... If I post ten videos of my bare white ass while wearing flip flops with a beeper will that be ok?

Pics of rear area would help.

I would do subs forward port up. Also you should be able to go much wider than 30in if you removed the rear seats.

Horrible videos, horrible installs, shitty boxes, what more could we ask for...... Go jump start a car with some jumper cables or install some used kicker cvr's in some poor bastards car. Lol

You will be way better off getting a component set that comes with the necessary crossover and getting a decent 2-4 channel amp. It will sound great and easy to setup. Set the amp at hpf to 80 hz and be done with it.

That's gonna be nice

Your basic SQ setup......haha Crazy thing is I cant believe how good I have gotten it to sound with some EQ'ing. The Rockford PA's do a great job. I have them set at 80-4k and the FT1's at 4k up. It does much much better than I was expecting, it sounds better than my previous components. I know, every time I go to upload to YouTube remember I held the damn phone wrong. Stupid. Yes I can load that song to cloud, it drops alittle lower on each verse, really good for demos. I will pm you with a link this afternoon

Bass Ballin edit I did, its quite mean, sorry for always holding the Iphone wrong lol

Both are very good quality amps. Sometimes things happen. I would wait and get the Crescendo back in before dropping the coin on the RF.

Thanks guys! I love the new setup, sounds incredible, Had several bailouts already and subs not broken in yet,LOL... Voltage is alittle better with the extra batts but still could use a D3100 I think. Here are some daytime pics of everything, headunit it Underhood HDR rear window view Another rear window view showing port (207sq in) I can see perfectly out rear window, Its not below window line but functional.

Badass!!

Thanks! Was a pure bitch wiring those other bats, I need longer 1/0 for the connecting runs. I had to attach them while they were under that floor, not easy!

My nightmare Both bats in and cleaned up, not much room to work with just enough. Cover panel back on and finished Sorry for the shitty pics.

Dinner plate!

Copy paste FAIL, lol It goes Silver Copper Gold Aluminum Molybden Zinc Lithium Tungsten Brass, carbon, Nickel, etc etc Zinc coated all thread is perfectly fine for what you need, Im running a BC5500 through it and put money no audible difference would be made by switching

Electrical conductivity (10.E6 Siemens/m) Electrical resistivity (10.E-8 Ohm.m) Thermal Conductivity (W/m.k) Thermal expansion coef. 10E-6(k-1) from 0 to 100°C Density (g/cm3) Melting point or degradation (°C) Silver 62,1 1,6 420 19,1 10,5 961 copper 58,5 1,7 401 17 8,9 1083 Gold 44,2 2,3 317 14,1 19,4 1064 Aluminium 36,9 2,7 237 23,5 2,7 660 Molybden 18,7 5,34 138 4,8 10,2 2623 Zinc 16,6 6,0 116 31 7,1 419 Lithium 10,8 9,3 84,7 56 0,54 181 Tungsten 8,9 11,2 174 4,5 19,3 3422 Brass 15,9 6,3 150 20 8,5 900 Carbon (ex PAN) 5,9 16,9 129 0,2 1,8 2500 Nickel 14,3 7,0 91 13,3 8,8 1455 Iron 10,1 9,9 80 12,1 7,9 1528 Palladium 9,5 10,5 72 11 12 1555 Platinium 9,3 10,8 107 9 21,4 1772 Tin 8,7 11,5 67 23,5 7,3 232 Bronze 67Cu33Zn 7,4 13,5 85 17 8,8 1040 Carbon steel 5,9 16,9 90 12 7,7 1400 Lead 4,7 21,3 35 29 11,3 327 Titanium 2,4 41,7 21 8,9 4,5 1668 St.Steel316L EN1.4404 1,32 76,0 15 16,5 7,9 1535 St.Steel 304 EN1.4301 1,37 73,0 16,3 16,5 7,9 1450 Mercury 1,1 90,9 8 61 13,5 -39 Fe. Cr. Alloy 0,74 134 16 11,1 7,2 +-1440 st.Steel 310 EN1.4841 0,14 720 14,2 17 7,75 2

TIBTECH Electrical conductivity (10.E6 Siemens/m) Electrical resistivity (10.E-8 Ohm.m) Thermal Conductivity (W/m.k) Thermal expansion coef. 10E-6(k-1) from 0 to 100°C Density (g/cm3) Melting point or degradation (°C) Silver 62,1 1,6 420 19,1 10,5 961 copper 58,5 1,7 401 17 8,9 1083 Gold 44,2 2,3 317 14,1 19,4 1064 Aluminium 36,9 2,7 237 23,5 2,7 660 Molybden 18,7 5,34 138 4,8 10,2 2623 Zinc 16,6 6,0 116 31 7,1 419 Lithium 10,8 9,3 84,7 56 0,54 181 Tungsten 8,9 11,2 174 4,5 19,3 3422 Brass 15,9 6,3 150 20 8,5 900 Carbon (ex PAN) 5,9 16,9 129 0,2 1,8 2500 Nickel 14,3 7,0 91 13,3 8,8 1455 Iron 10,1 9,9 80 12,1 7,9 1528 Palladium 9,5 10,5 72 11 12 1555 Platinium 9,3 10,8 107 9 21,4 1772 Tin 8,7 11,5 67 23,5 7,3 232 Bronze 67Cu33Zn 7,4 13,5 85 17 8,8 1040 Carbon steel 5,9 16,9 90 12 7,7 1400 Lead 4,7 21,3 35 29 11,3 327 Titanium 2,4 41,7 21 8,9 4,5 1668 St.Steel316L EN1.4404 1,32 76,0 15 16,5 7,9 1535 St.Steel 304 EN1.4301 1,37 73,0 16,3 16,5 7,9 1450 Mercury 1,1 90,9 8 61 13,5 -39 Fe. Cr. Alloy 0,74 134 16 11,1 7,2 +-1440 st.Steel 310 EN1.4841 0,14 720 14,2 17 7,75 2

Looks good

I just use the standard Zinc coated all thread from Home Depot on all my builds. Never had a problem, If your picky you can order Aluminum all thread also. I believe 6061 is what you will want. I drill a slightly smaller hole and tighten my chuck on the all thread and screw it through the hole for a tighter seal, Then just silicon it up to be completely airtight. I use 1/4 in on smaller builds and 5/16 on large builds.

Its dropping down to 12.9-13.0 at idle and red lights with the sound system OFF. This is with the 2 new XS d3400's under hood. They agreed its something wrong and said send it back.