StreetLegal
Members
-
Joined
-
Last visited
Everything posted by StreetLegal
-
To run that comp. set while utilizing the full use of that 4 channel amp to do so, is to hook it up into stereo bridge. Place switch into 4 channel position. rca from head unit -------------------- amp front right ------------------------------ rear left front left ------------------------------ front left rear right ------------------------------ rear right rear left ------------------------------ front right turn off filter on head unit (if it has one) and set amp x-over switch to full or all pass for both front and rear channels on the amp -
awesome !
-
would prefer fi over kicker any day ...
-
looks great !
-
-
-
It is larger writing than stock, that is what Sean requested.
-
Looks darn good, however, the writing looks a little big as compared to the original, the original writing is well proposionate to the size of the woofer, especially for the tens, also, different colours could be an option too.
-
looks very tempting
-
HBD, have a great one !
Impressive!
Thanks Duane.
whats ur take on the sundown Z? and ya i was looking at the icon also dont have any experience with the z, but from what I have read it's also a good sub and a good company... The fi q is another good option.
If you are set and have the money then buy the idmax, it's a very good driver. If not, an ssa icon is right up there, I would personally choose the icon, because its cheaper, cheaper to recone, and I have guaranteed direct customer service. JMO.
x^2 All the best on your special day.
Another great addition to ssa. welcome!
Having the same problem with windows 7, I can only close it with task manager.
amp is a good choice for you budget.
amp should work fine whats your budget for the amp?
dual 2 ohms as mentioned above
With reference to subwoofers, which I would assume you are talking about; dual 1 means a subwoofer with 2 voice coils, each having an impedance load of 1 ohm per coil dual 2 means a subwoofer with 2 voice coils, each having an impedance load of 2 ohms per coil It would be better to give info on your amp, or more so, what are you trying to put together overall ?
Rick u are bad..
Very good machining! However, from experience, I can tell you that using a single set screw to lock onto the battery post will become loose after time especially with the body of the terminal extending to accomidate the wires (some what of a lever effect), using two set screws 90 degrees apart would have been ideal. Overall, very good, you got some skills there dude keep it going.