ricksi30
SSA Regular
-
Joined
-
Last visited
Everything posted by ricksi30
-
-
Where did you buy it?
-
maybe 4 inch? idk, never really messed with aeroports. are they hard to install? how do you do it? No you would need way too many 4" ports. Aero's probably won't work in this scenario.
-
That will work fine. If you port between the two subs that will help brace it too.
-
Yes you could be right around there, just depends on how much bracing. Use wooden dowels or all thread to save space.
-
1"
-
What are your max dimensions? Vehicle?
You can get ~4 cubes with 75 square inches of port area and a 34hz tuning. With NO bracing.
Even at 75 you will have less volume than you want.
Less port area will work, just shoot for around 75 and you will be alright.
Which makes it even harder to do what you want.
Not a chance, unless you have an external port.
I have my single XCON (on 600 RMS) with a single 6" aero and it seems fine. When I build my final enclosure for both of my XCON's on more power I'll be using a bit more.
Never mind I can't read. Pm Shizzzon, he has the same car maybe he can help.
What kind of car?
Awesome! I will have my bank account prepared.
So Skip the mdf and make a fibreglass layer bonded right to the metal, just making the roof thicker and more rigid than the crappy tin roof? Or are you saying have metal, then glue on kerfed mdf, then fibreglass the bottom (inside) of the mdf on the inside then head liner? The more mass you can add the better.
Have fun guys!
The kerfed mdf should help, then as Julian said use some fiberglass.
Good luck my friend.
Get the D1 N2s and run the amp at one ohm. Do you have the electrical to back this power up?
Have you tried emailing them at Sales @ ficaraudio.com? (no spaces)