REVpuggie

bet this will be a monster (in the smallest sense) looking forward seeing testing vid's / demo of these does this mean there are going to to be new frames with bigger spiderlandings for the 10's 12's and 15's too?

11,25 a gallon here ... filling my car up costs 98 euro (about 144 USD)

what is the problem ? you will most likely run active anyway ..any DSP will have the option to switch the phase ..just listen to what sounds right and keep that setting . if your not running them active then switching the wire shouln't be that hard eighter

very nice score !

We normally cut the entire rear deck away and weld a crossed frame in place for optimal results... you could use a design that uses the skihole efficently ...

I'd opt for two 12s on that budget ... but first you need to figure out what you are willing to do to get the sound from the sub from the back to the front ... if you are not willing to spend time and money in that it will be pointless to advice anyting ......you know anyone who has his HT subwoofer placed in their neigbours livingroom ? .......... I don"t !

Why has nobody asked what options he has on the Q ?

someone as knowledgable but a with fresh view on things could be sufficiant .

maybe the problem is that some people just want their goals to be achieved but are not willing to gather the knowledge to do so , they just want ready to buy/build answers , which is fully understandable but not very realistic . M5 , the way you write up stuff is pretty blunt at times ,but honest . and Yes some people just can't handle the combination of the two when all they want is those ready to buy/build answers for too small spaces , not big enough budgets for their skyhigh expectations

If I knew you , I'd slap you as soon as you showed it to me , what a waste of good equipment ! but hey , you came to the right forum ... look around , use the search button and read , see and learn .

The guy certainly seems sane and smart enough , unfortunately that cant be said of all of the rest off todays youth , and thats where the problem is I think . on a note , in the 60's ans 70's they sang about heroine and lsd , today many of them are regarded classics ... those songs ff'ed up some kids too

I''d say : give Jaqcob a call , why should we as forummembers be involved in this ?

I dont like having it set that low, unless you have a really low slope, i prefer to set at 80 and have a -12 db slope. The lower Xover point seems to mess with the lower freq. where you want the most output, so you're not getting the most out of your system. Hence why the comment was meant for the TS , often tuning that high causes problems in phasing between the sub and mids causing a muddy sound , if your comps are run active you could filter the mids a bit higher , nevertheless when kickdrums are played primarely by your mids it will always have the potential to sound better and have more impact , some aftermarket comps would be required though. crossovers for one driver set to close to each other will cause problems yes but with a hp set at 30 and an LP set at 63 or 72 should not cause problems , I seldom use a 12db slope ,I prefer 24 or higher depending on driver and use

please remove post , made mistake

Usually a lowpass set at 80hz is too high for a sub, try 63 or so

Nice score! Got pics of how the install was made?

maybe a high Qts Fi Q or an kicker solo classic is for you if your sticking withy the one cuft idea * edit* just saw the budget , aw hell , we all end up spending more than we thought ,right ?

Exactly what I was thinking ! So they stole a good looking design ,probably for all the wrong reasons ... that idea does not do well with me

thought this thread was dead and gone ... my initial idea didnt come across to most of SSA i guess . ps: Denim I'm checking that big boards button of yours regulary , damn SSA is goin strong !

4 fifteens defenately got enough to do 150+ if done right installs of guys I know : 4 fifteens chaos walled 16 cubes of 5kw , 154+ 4 fifteens Q walled 4th order bandpass (32cubes total) on 8KW 157+ on the TL on music in european competition , metered at headrest they're not on this forum though

What do you think will happen with that enclosure if you were in an accident @ 30Mph ? please take those backseats out and secure that box on the floorpanel , safety man bass is not worth dying for *edit* nice truck by the way and the bass problem is probablt because the port and sub are not aligned right , so if you were to build a new box , try facing port up behind driverseat and sub facing forward between the seats or facing up behind passengerseat .....no guarantees , but will most probably work better in your truck

congratulations !

Never met any goal using polyfill .. make a propper size box , no polyfill , the effects of polyfill aren't that big anyway