Just a quick question on the Saz 3000d is it a MINIMUM for a 300 amp fuse or is it it MUST be a 300 amp fuse?

Thanks, Julian

Just a quick question on the Saz 3000d is it a MINIMUM for a 300 amp fuse or is it it MUST be a 300 amp fuse?

Thanks, Julian

I would go with what Jacob recommends. However I wouldnt go no lower than a 250 amp fuse. But good electric always plays a part

well i have a 500 amp fuse laying around and the closest CA shop is 40 mins away lol

300 amp fuse 6$ (ignore the pic)

http://www.knukonceptz.com/productDetail.cfm?prodID=ANL300

or

http://www.knukonceptz.com/productMaster.cfm?Category=Fuses

Depends on how hard your going to be pushing your equipment and what ohm load you are running at, that 300A maximum recommendation is if your at 1 ohm and going all out just to be safe. Remember music changes and your not drawing 300A's every second.

at 2 ohms.

do not use the 500amp fuse....hell even with 2/0 gauge wire the biggest safest fuse is a 400amp fuse....with 1/0 gauge the biggest fuse u are suppose to use is 325 amp fuse...

i would do the recommended 300amp fuse (at two ohms im sure u could get away with 200amp fuse)

if for some ungodly reason ur system shorted out it would pull more than 300amps and would burn the wire/short the amp out before a 500amp fuse popped...

At 2 ohms anywhere from a 175-200A, you could possibly get by with a 150A like I said it just depends on how you push your equipment.

before Id use the 500 amp fuse I wouldnt fuse at all

i used an 150A for a good while till i got around to getting a 250A. At competitions i use a 150A for my class and do demos and what not with no problems what so ever.

yep i went with a 200a fuse, did a little math and it ended up even if i was at 12v i would be pulling 125 amps so 1500 Watts divided by 12volt = 125 amps.

Kosher.

Thanks guys.