September 20, 201014 yr Author big three is done!! it has worked wonders for me! went from 14.2 volts to 14.6! the engine even tuns over faster ! ill try to get some pics up tonight.
September 20, 201014 yr my home music system for now.thats all i got for nowThose some rs-150's or 125's? Did you design projects and xo's? or use someones build?
October 28, 201014 yr Author Ok, so it's been a while since iv updated this build log, but last week I decided to go ported. I just got a email conferming my 2 of 4 4" aeroports have been delivered. I'm not home right Now so no picks till later. The box should be around 7 cubes after port displacement. Guna be tuned to 30 hz. Stay tuned for updates!
November 12, 201014 yr Author alright, i should have updated this sooner, but anyway here are some pics of the aero ports i have added so far. they are 4" psp aeros and will be tuned to 29 hz. i decided to go with 3 aeros instead of 4 because 3 4" aeros give me almost exactly 16^2 inches of port area and also because the ports will already be cut to length to get a 29 hz tuning ftw!and just the side project i have been working on during this whole build.first time i have ever used veneer and a wood finish like this. tell me what yo think, ill be putting a build log of my ht system here when its all done. and for the price, these are some of the most amazing woofers i have ever usedwell thats it for now, ill put up some pics of my big 3 as i have not done so yet.
November 12, 201014 yr Author good job! that sub is massive!!!!Sure is! Also one of the cleanest subs I have ever heard
November 13, 201014 yr Looking good man.That amp kit wore was a joke. Someone brought one of those kits to the house the other day. I didnt want to hate on his 4ga but damn. My 12ga wire for the mids and highs had more copper in it. lol
November 13, 201014 yr Author Looking good man.That amp kit wore was a joke. Someone brought one of those kits to the house the other day. I didnt want to hate on his 4ga but damn. My 12ga wire for the mids and highs had more copper in it. lolLol same here my speaker wire has 3x as much copper, and the kit was actualy cca! Lol!!
November 14, 201014 yr I always liked carpet.Paint can be so shiny !I hope you planned some window tint ? Be careful:peepwall: ya I will probably go with carpet and yes, I will most definitely be tinting the windows. Thanks for your input!carpet takes off deee beeez
November 14, 201014 yr Author I always liked carpet.Paint can be so shiny !I hope you planned some window tint ? Be careful:peepwall: ya I will probably go with carpet and yes, I will most definitely be tinting the windows. Thanks for your input!carpet takes off deee beeezI'm guna actualy be doing beadliner, seems like it would last longer
December 6, 201014 yr Author Ok, so now it's frontstage time. I originaly was going to try and put my own set of drivers together but now think maby just going with available set would be better. What do you guys think of the bravox cs60k's, been seeing allot about them here lately. Or if you guys have any other suggestions
January 25, 201114 yr Author just installed my 1200 d today and i did a small hair trick!!!!! vids tomorrow!!!! the q 18 moves a hell of a lot o air off 1000 watts. FTW!!!!! Edited January 25, 201114 yr by Bobobass
January 26, 201114 yr Author Bring on the vids!!!Teh vids are done!!and yes i need some damping. there in none right now.http://www.youtube.com/watch?v=ZpTrUlYKCO4http://www.youtube.com/watch?v=aSsQH0_bc1I
February 20, 201114 yr Author finaly got to mounting the q with t nuts. way better than dry wall screws.
February 20, 201114 yr Bring on the vids!!!Teh vids are done!!and yes i need some damping. there in none right now.http://www.youtube.com/watch?v=aSsQH0_bc1ILITTER BUG!!!... I hope you picked up that menu/pamphlet... lolzVideos are nice... What is your voltage like when bumping?
February 20, 201114 yr Also with t-nuts... how did you install them? Pilot hole smaller than the nut and hammer in? I just haven't decided on what to do about mounting my subwoofer... On my old box I am almost sure I had a leak and it was killing the sound... I kind of think the same thing is happening with my new enclosure... Looking for a more secure method..
February 20, 201114 yr Author Bring on the vids!!!Teh vids are done!!and yes i need some damping. there in none right now.http://www.youtube.com/watch?v=aSsQH0_bc1ILITTER BUG!!!... I hope you picked up that menu/pamphlet... lolzVideos are nice... What is your voltage like when bumping?my voltage goes from 14.6 to 13.9 on this song. seems pretty decent for a stock electrical. and dont worry, i picked up the paper lollol dont wory i pi
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.