Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

is the sundown 1500 .5 ohm stable?? for daily use? Using it for 2 15" SSA Icons

Yes but it voids the warranty.

What coils do your icons have? And your planning on switching to xcons and wiring to .5?

In my honest opinion, don't be cheap and run it at .5, if you need 3000watts buy a 3000d.

And if you do end up running it at 0.5 you better have a good electrical setup.

I beleive the V1's were stable @ .5 ohm but not the V2's

Can it be done? Yes. Should it be done? Probably not. Can you do it? That we don't know. For daily you shouldn't run your amp that low unless you really know what you are doing and know you have the electrical support for it. Get a second and strap them if you are already stuck on that load.

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Yes and to me the OP is just skimping out of buying a 3000watt amp.

I also know distortion will rise a bit, not sure if it'll be audible or not.

To me this is like buying a subaru wrx, adding a mbc and boosting it from the stock 14.5psi to 25psi and going YIPPIE I'm race ready!

I beleive the V1's were stable @ .5 ohm but not the V2's

The v.2 does everything the v.1 does.

I beleive the V1's were stable @ .5 ohm but not the V2's

The v.2 does everything the v.1 does.

I stand corrected. Thank you.

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Yes and to me the OP is just skimping out of buying a 3000watt amp.

I also know distortion will rise a bit, not sure if it'll be audible or not.

To me this is like buying a subaru wrx, adding a mbc and boosting it from the stock 14.5psi to 25psi and going YIPPIE I'm race ready!

Hey, hey! Not everyone can get their hands on an STI

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Yes and to me the OP is just skimping out of buying a 3000watt amp.

I also know distortion will rise a bit, not sure if it'll be audible or not.

To me this is like buying a subaru wrx, adding a mbc and boosting it from the stock 14.5psi to 25psi and going YIPPIE I'm race ready!

Hey, hey! Not everyone can get their hands on an STI

Your an idiot. :bigok:

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.