-
Recently Browsing 0 members
No registered users viewing this page.
-
-
Recent Topics
-
- 1 comment
- 111 views
-
- 1 comment
- 107 views
-
- 1 comment
- 103 views
-
- 1 comment
- 147 views
-
- 1 comment
- 270 views
-
- 3 comments
- 232 views
-
-
-
Similar Content
-
By XtremeEnclosures
FLASH SALE
10% off all Subwoofer Boxes!
Coupon Code: 052CD31EE75AA6D
Enter the coupon code at checkout
www.soundoffaudio.com
CUSTOM FIT SUBWOOFER ENCLOSURES
VEHICLE SPECIFIC SUB BOXES FOR
CARS-TRUCKS-SPORT UTILITY VEHICLES
WE DESIGN AND BUILD ALL OF OUR SUBWOOFER BOXES!
VISIT OUR WEBSITE TODAY IF YOU WANT A QUALITY, TOUGH, TIGHT BASS SOUND IN YOUR RIDE!
-
By antoinez28
So I'm been on the web looking at different types of 5k amps that are linkable amps, so I can upgrade my current amp set up...I'm looking for a amp out of these new or used- dd m4a, sundown audio 4500, crescendo bc5500, dc audio 5k, ampere audio 5000.1. It has to be able to do around 3800-4000 wire down to 1.3ohms.
Running 3-18s DSS ethos box is in the works....
Electrical is dual alts stock will run the truck, mid, and highs the singer 270amp will run only for the battery bank. 4 juice box blackcherry battery back, two runs of 1/0 wielding wire.
( would like more batts if space would allow)
( playing music daily and burbs on comps)
I'm not looking for a father and son conversation here just wanting to know which amp would be better suited for my set up that's all thanks for reading.
-
By YMforshort
For Starters it will be going in a 2004 Chevy Tahoe. My demensions i would like to stay in are:30Dx47Wx27H. Box will be for 2 18 inch DSS Ethos powered by a Soundqubed 3500.1
5cft net for each sub tuned to 32 hertz. I wanna do Subs Up Port back and havent decided if i want to go with aeros or a traditional slot port design. Which would be easier for a first time box builder?
Included some photos of "my hoe".
Thanks in advance for the help guys!!!!
-
By osiris10012
Hello everyone,
I wanted to get a build log going for my recent purchase. Just bought a DSS 15" Ethos (2 Ohm) and will be running it off my PPI BK1800.1 in a 3.32 cu ft net enclosure tuned to 32.13 Hz. Here is a list of my set up so far. Nothing special.
2006 Nissan Titan
Audio:
Sundown Audio E10V2 (4 Ohm)
1.25 cu ft net enclosure tuned to 36 Hz
PPI BK1800.1D
Sky High Audio 1/0 and 8 gauge wiring
Performance:
JBA Longtubes, Secondary cat delete with resonators, 2.5" to 3" borla catback and uprev tuned.
Future plans: Upgrade battery to diehard platinum and sound deadening
Anyways on to the pics up until now:
Picture of the Truck
Video of the exhaust set up:
First enclosure I built (1 cu ft tuned to 35 Hz):
Most recent enclosure I built(1.25 cu ft tuned to 36 Hz)
Amp Rack I built for under my passenger side seat(8 gauge speaker wire will be installed as soon as the new woofer shows up)
After Big 3 and terminal upgrade(battery will be replace very soon):
1/0 Sky High compared to my factory ground and old 4 gauge
Some Amp Pics of my PPI BK1800.1D:
Adapter harness my buddy made to retain my factory deck:
Small amount of deadening I had:
Picture of the new enclosure design for My 15" ethos when it gets here:
Thanks for Looking
-
-
Recent YouTube Posts