RL-i8 Sealed In My 97 Reg Cab Dakota

[troy_audi0 0]

Hey,

Ok RL-i8 Sealed In My 97 Reg Cab Dakota

I was going to go ported but Im going to be adding more amps & doing an active setup

I was going to put 360x1 to the RL-i8 ported 1.2^ @35Hz

Here's the deal..

Im going to move from one shop to a new shop the new one dose not sell Arc

So I will be running Zapco I like'em better anyway..

Zapco Refrence 350.2 on the Sub(350x1@4Ohms)

Zapco Refrence 350.2 On The Mids (100x2@4Ohms)

Zapco 200.2 On the tweeters (50x2)

But now Im looking at 350w sealed..

what do you think will it be good, great or outstanding? Or is it a Bad idea..

Lookin at just under 1^

The pic is from the drivers seat..

Here's the deal..

Im going to move from one shop to a new shop the new one dose not sell Arc

So I will be running Zapco I like'em better anyway..

Zapco Refrence 350.2 on the Sub(350x1@4Ohms)

Zapco Refrence 350.2 On The Mids (100x2@4Ohms)

Zapco 200.2 On the tweeters (50x2)

[Aaron Clinton 2,372]

I think it will be good. You wont be flexing your windows with it, but it will do well in a small cab.

[mrray13 30]

350w on that sub, ported or otherwise, will make it move, lol. jsut under 1ft^3 net is going to allow it to drop really low, but won't offer the flattest response. mike has shown .17ft^3 net as the flattest sealed alignment. and the rl-i8 has plenty of output in that size!

in your cab, where it's located, with 350wrms and ~.9ft^3, it's going to rock! like denim said, may no tbe flexing windshields, but it's going to let people know it's there!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[troy_audi0 0]

right on guys..

Oh keep the shop swap on the DL..

Thats why I posted it here.. got CYV & the others on the work computer..

Thanks.. PS May open my own shop real soon

Thanks Troy