SoundQubed

Hey guys I just ordered 4 HDS3 12s. I saw the break-in time frame somewhere before, but I can't find it again. What is the recommended time frame for the break in period?? Thanks!

Our partners over at Atrend USA are offering up a sweet deal on all SoundQubed enclosures for the month of February. 15% off any enclosure Start Date 2/9/2015 - End Date 2/16/2015 PROMO CODE: https://atrendusa.com/soundqubed

Currentlt own a HDS212 with a 750.1. I plan on getting a HDS3 very soon with a 1200.2. Now the problem is idk if u should get another 12 or try a 15. My theory, louder (which I want),capable of hitting more notes, like higher and lower hz's with a 15 compared to my current 12. But I'm trying to plan ahead for future build in my next car (which I hope it'll be an Acura RSX). So I'd like to consider how the HDS312 or 15 will sound in a hatch with good box made for the sub. Any opinions or questions needed answered to help me figure out what I exactly want. Thanks ahead of time!

Check out this super sweet awesome deal we are having for tax season!! www.soundqubed.com

Hi all, just putting together my first setup to go into a 2007 VW R32. Just ordered a Q1-1200D amp to go with a second hand JL 10W7. I've just finished the box for the sub and i've already got some 14ga OFC speaker wire. Do you think this will be ok or do I need 12ga as recommended by SQ? Sub is rated at 750W RMS. Cheers

I really like lows and good sound....im looking for 2 good 18s to be powered by a taramps 8k...my temp box is tuned to 34-35 about 11 cubes. Im between the hdc4s, sp4s, fi team, dss ethos...

Just wondering if the new HS310's would work well in a 4th order application ? i cant seem to find anything about box recommendation etc. and also if they will work in a 4th order application will they work well in .5 seale each im looking at doing 4 10's in a 2:1 ratio 4th in my trunk. Thanks

This year we are going to have a load of sales going on! Black Friday: Starts at Midnight November 28th (Black Friday) and ends Midnight November 29th. Cyber Monday: Starts Midnight September 1st and ends Midnight September 2nd. Everything (excluding glue, recones, and misc parts) will be 10% off site wide. We will also be discounting our Woofer Bundles. Friday Trunk Busters 25% off Q1-3500 20% off Q1-750 30% off Earbuds Monday Trunk Busters 20% off Q1-1200 20% off Q1-2200 30% off Earbuds Also, Make sure to read over our shipping policy! We offer free shipping and signature ship for $5.00.

I have 2 12inch HDC 3.0 and need to know what i should set my AQ 2200 amp to for the settings.

Hey guys, So I bought a HDS212 D2 and 750.1 little over month ago. Love it but I wanna get louder. So looking for input on how I should spend money. -Do I buy another HDS212 and 750.1 and hook it all up together in a new box -Buy another HDS212 and a new 1200.1 amp plus box? -Get a HDS312 or 15 and 1200.1 and possibly use same box (unless I go with 15" obviously) Also, for electrical, I'd probably have to get a second battery? And I'm still looking towards the big 3 in near future. Currently in a '01 Corolla with an interstate battery (550 CCA) Off topic question: if I made a wood floor and put my box in place of my backseat, would it sound better than being in the trunk?…

I've heard of this problem before, but can't recall the solution. As soon as I turn the key the bass note starts playing non stop unless I unplug either one of the RCA jacks. Doesn't matter which, then it will function normally. What causes this?

Ok, I recently made the jump to buy some new gear to replace my old dual 15" old school Kicker Infuse subs. Mainly due to I needed my trunk back as the box took up the ENTIRE trunk of my 2008 Focus SE. I went ahead trying to budget and got a good deal on a Power Acoustik RZ1-1500D. Its stable at 900RMS at 2ohm which the single sub will be wired up as. Now, I know it states 600 RMS & 1200 watt burst for the HDS woofer. My main concern is, do I run a large risk of blowing the speaker using this amp? The box it will be going in is a single 12" ported enclosure: Belva Sub Box 1SV12G (Gray) with a air volume of 1.8 Cubic Ft. tuned to 36hz. Mainly due to cost, size, an…

what is the cubic foot needed per sub??? im going with these in a slot ported box tuned to 34hz port area is 256in will this work?

Alright guys so this is my first "big" system. I have 2 soundqubed hdc3 15 d2's in a 10 ish cu ft box tuned to 32 hz. I have 2 soundqubed q1-2200 amps. I plan on strapping them. My mids and highs I got on lock so they're not important. I have a 180 amp ho alt by singer alternators. This is the absolute biggest he could make it. 1 xs d5100r under the hood and 2 xs xp3000's in the back. Nothing is installed yet I'm waiting for all my install accessories. Do you think I have enough batteries and is my alternator sufficient enough to handle 500 amps of max current? I'm waiting on my xs charger to come in to install everything because I need to fully charge my batteries. Also…

Which would be a better choice on that power? Also I want to be able to recone either speaker can they both be reconed?

Getting two hds212s and wanna know what amp to get(sq brand) , and if i should get dual 2 ohm or dual 4 ohm. And if youve done this build, what are the box measures

Would this be a good choice for a daily driver? I listen to mostly rock music. I know there are better choices but this is in my budget range.

So I just made my purchase for a HDS212 and Q1-750. Wanted to get some input on how to properly tune it. I don't have any meters, dd1s, anything like that, but I may be able to borrow one. But anyways, what is the process of tuning the Q1-750? Also, this will be my first system with a bass knob, so I'd appreciate help on tuning with that. Thanks ahead of time

What is he recommended box size for a HDS210?

whats the displacement of the hds3 12

So I just finished my recone on my HDC3-15 copper D1 and could not figure out which dust cap to use. So I started looking at what I could use that would make it a little different from everyone else. So hre is how it went: First thought Second thought And the final, which is how I believe Sounqubed should be selling/shipping the subwoofers I took their 8 inch carbon fiber cap and trimmed it down to 6 inches to fit in the original cap area and "I like it alot".

I see on the site listings for ported. Any recommendations on sealed?

At Texas Heatwave, my truck The Black Nasty managed to pull off a 160.1 db for DB DRAG during my bassrace run. Final average was 158.55 in bassrace 159.9 class. 6 HDC4 15s 6 Q3500.1s 12 volts That is all....

Okay guys, I thought I'd share my most recent build with yall. I work until 5:00 P.M. so please excuse the low light pictures. Most of the work was done at night. Ask me questions so I can make this a more complete build log! I wanted to put this here for SoundQubed, but if a mod thinks it needs to be moved to the build log section, then feel free to move it. Equipment: Two HDS215s, JBL GTO 1400.1 amplifier (1500w RMS @ 2 ohms), XS Power D3100 battery, Alpine CDE-123 head unit, Sky high 10ga wire for subs and 1/0 for power and ground. Stock alternator, and I still haven't done the big 3... I need to get around to that.. But my light dimming isn't too bad with this batte…

I'm trying to copy/paste my build log from another site, but I can't manage to get paste to work... I've tried ctrl+v, as well as the button. Nothing seems to work. Any suggestions?