SoundQubed

Are you an avid Amazon shopper? Or perhaps you just prefer Amazon over other pages. If this is you we now offer all the same products and benefits through Amazon that we offer on our site. •Free Shipping •Same Day Shipping •Price Matched •Warranty We have set up a super sweet 10% OFF promo code for SSA Members for the month of February. Just copy the code below and paste it in at checkout and you'll be good to go. B6WXQ86P (Start Date - 02/06/2015 5:00 PM PST End Date - 02/28/2015 11:59 PM PST)

Please welcome them to SSA and check out their items on the SSA Store. They will be here to help answer product questions and share information on them.

Anyone own seen or heard the new subs from soundqubed? Looking into possibly running one of the 12" version

New Amplifier Line Up! Posted by SoundQubed on 2/5/2015 to Product News That's right the rumors are true! We have discontinued the Q1-3500D.1! Don't fear, we have replaced it with a bigger badder model that we aptly named the Q1-4500D.1. This amplifier utilizes the Q1-3500 casing and features the new SOUNDQUBED laser etched logo on the heat sink. The Q1-4500D.1 is on back order and are slated to be in mid April. If you would like to purchase one at the pre sale price you may do so HERE. Once the amps arrive the price will adjust to $839.00 shipped. The New Q1-4500D.1 does 4560W @14.4v at 1 Ohm. (1% THD) We have also upgraded the Q1-2200D.1 to the new version the Q1-22…

Perhaps you should sticky this info. http://www.soundqubed.com/Box-Sizes-and-Tuning-_ep_68.html

The HDS200 series is a revised version of our SDC2.5. The major differences you will see is the switch from a cast basket to stamped, and the addition of push connectors instead of the direct leads. These woofers also have an added cooling option to the backplate, which the SDC2.5 was lacking. With these changes we were able to drop the prices for you all. The HDS200 series is a great woofer for those not looking to upgrade their charging system but still want to rattle their car. At 600W RMS with a 2.5" coil they are capable of fitting in smaller enclosures for placement with stock installs and everyday street beat. We do suggest putting these, along with all of our woo…

Ok so I made a few boxes for my hdc4 and it sounded good except on a particular note. I believe it was a higher frequency seeing as how I still hit the lows and moved air fine. If you listen to "candy shop by 50 cent. It's that bass note through out the song. My sub makes noises like a knocking noise. I can hear in the port and I can hear it when I listen to the sub. Any ways I thought it was the tuning so I made quite a few boxes but had same results or less noticeable, but still there results. I'd listen to it free air and it sounded fine. I even switched the subs to a different brand and it didn't make that noise. So I was assuming it was the speaker. But th…

Hey everyone, new on this forum but not really new to car audio, I have a question regarding soundqubed's amplifiers. I am stuck between getting a 2200 and the 3500. But I have heard rumors that the 2200 has problems, shares parts with the hifonix brand things like that. The 3500 has its downsides too though such as requiring very stiff voltage, and being that much more of a bummer if I lose it to vibration, moisture, life kinda things. Should I save up for the 3500? Or buy the 2200 and strap them in the future if I want more powe. Thank you for your input

So i found a nice nice shape for age mmats mpa-2300 and dont know much about it besides it works, does anyone know anything about these and if they can do 2ohms stable bridged? Im not sure if ill keep it or not what would it be good on since i think its maybe 1100rms.. Lol if I could use mtx and mmats on two 15"s be nice without negative effects

so i have 00 s10 ext cab xtreme and got two 10" sq hds200 d2 with ported box and mtx 1501d amp but maybe since its been a week with these subs not broke in but still yet I dont think this will be enough bass for me, So im thinking of redoing everything maybe do 2-15" hdc3 with sq 4500 amplifier with custom built box. When I do the box has anyone had experience with the best ported box design? round ports,slot and also subs up or face foward and port location. Im just want down right beat me up bass and when I turn it up I know that it will impress others for sure.

Sup SQ Forum, So the problem: I re-tuned my amp with my knob and for some reason now on certain songs, I can turn the knob all the way up to the max without the clipping light coming on. (Didn't happen before) Before: I had my 750.1 and HDS212 hooked up, tuned the amp with a youtube video on my phone with a 40hz note (Gain) and 100hz note (LPF) using my knob's (Set to half way) clipping light to set everything. Never had the problem Now: Same 750.1 but now hooked up my new HDS312. Also, this time I downloaded and used a cd with a 40hz note and 100hz note. Same way, Bass Knob set to halfway and adjusted everything until the clipping light came on. But now I can turn…

What does everyone think about the soundqubed 2200? Has anyone ever had an issue with one?

Hi all, just putting together my first setup to go into a 2007 VW R32. Just ordered a Q1-1200D amp to go with a second hand JL 10W7. I've just finished the box for the sub and i've already got some 14ga OFC speaker wire. Do you think this will be ok or do I need 12ga as recommended by SQ? Sub is rated at 750W RMS. Cheers

Hey guys, I am needing some direction or reassurance in what I'm doing with my port. This is my first time working with an 18" sub and with SoundQubed equipment. According to soundqubed.com, the HDC3 18" wants a box anywhere from 5-6 cubes with a vent of 96sq" x 18" long. To me, that port seems odd. So I just got done designing my box. External dimensions are 25" x 25" x 26" but I'm using double sheets of .75 MDF, so each measurement take off 3". I calculate internal space at 22" x 22" x 23" = 11,132 inches = 6.44 cubes. Rough internal space after ONLY sub displacements is 6.4ish cubes. My desired tuning frequency is 31-32hz, because the fs of this sub is 31hz. So, I …

Hey folks. I've been considering this amplifier for a friend as the first step up to a decent amplifier, but I'm curious to know if anyone has any experience with these being used at 1/2 ohm and if they're stable that low. I can wire the drivers for 2 ohms, but I'd rather go lower if the amplifier can cope with it, even though something tells me we're going to have charging system issues well before any amplifier over-current scenarios. Thanks in advance!

What is he recommended box size for a HDS210?

I really like lows and good sound....im looking for 2 good 18s to be powered by a taramps 8k...my temp box is tuned to 34-35 about 11 cubes. Im between the hdc4s, sp4s, fi team, dss ethos...

Hey guys I just ordered 4 HDS3 12s. I saw the break-in time frame somewhere before, but I can't find it again. What is the recommended time frame for the break in period?? Thanks!

Hi, I bought 2 soundqubed hdc3 15" for a friend recently on the SSA store, and he already blew one. He uses a Taramps 8K on them ! Is it possible to order a recone kit on SSA, or do I need o go on Soundqubed website ? I can't even find the price for this kit. But I saw the HDC4 recone price, so it must be cheaper ! In case I need to order through Soundqubed, I hope they answer emails, because, I don't want to call them : my english may not be good enough, and my telephoen bill will jump too much with a super long distance call like that (to a foreign country) ! Waiting for some ideas. Thanks guys.

I am wondering about the soundqubed 4 channel amp and their component sets. Anyone have any experience with them? I am considering buying the amp and 2 sets of components for my 2004 2 door s10 blazer... anyone heard them that can vouch for their power?

Getting two hds212s and wanna know what amp to get(sq brand) , and if i should get dual 2 ohm or dual 4 ohm. And if youve done this build, what are the box measures

just place my first order on SSA for SQ 1 SQ HDS310 sub Q1-1200D amp SQ 4-Gauge Amplifier Install Kit cant wait for my goods to come, who here has SQ stuff?

Which would be a better choice on that power? Also I want to be able to recone either speaker can they both be reconed?

I'm looking at purchasing a couple HDS212D2's, but I'm attempting to plan out the build as much as possible before actually getting started. I see that the recommendations for box size per 12" woofer is around 2 cubes, with a 32"sq port (equating to 2"x16" slot size) at 21" long. This equates to a 40hz tune, which if recommended, so be it. However! Looking at the port velocity at this size, I see that the velocity spikes to over 70 at 38hz, and the driver over-extends before hitting 28-30hz. SQ doesn't recommend a smaller port cross section than 32"sq due to chuffing, but I see that a 16"sq by 27" long slot port will give a 25hz tune and the same air velocity, with t…

Currentlt own a HDS212 with a 750.1. I plan on getting a HDS3 very soon with a 1200.2. Now the problem is idk if u should get another 12 or try a 15. My theory, louder (which I want),capable of hitting more notes, like higher and lower hz's with a 15 compared to my current 12. But I'm trying to plan ahead for future build in my next car (which I hope it'll be an Acura RSX). So I'd like to consider how the HDS312 or 15 will sound in a hatch with good box made for the sub. Any opinions or questions needed answered to help me figure out what I exactly want. Thanks ahead of time!