For Sale/Wanted

1. Product: Mmats Pro Audio 3500.1 2. Specs: The amp is rated @ 2700 rms at 1 ohm. You can check out the specs on Mmats website: http://www.mmatsproaudio.com/pdfs/2004-2008%20Manuals/D3500.1_D3500.05.htm. 3. Description/Condition: 7/10 Cosmetic 10/10 Function 4. Price: I'm asking $600 shipped for one the other is sold. 5. Pictures:

1. Product: Phoenix Gold Elite.2 2. Specs: The Elite amplifiers feature only the finest in audio components such as Burr Brown op-amps, Monolithic signal capacitors, and dual-package Sanken output transistors. This result is unparalleled sonic performance in a mobile audio amplifier. The sheer breadth of the Elite amplifiers' dynamic range conveys a musical realism that transcends standard amplifier designs. With seemingly unlimited frequency response and smashing dynamic range the end result is the finest sounding amplifier Phoenix Gold has ever built, period. Oh yeah, they are also built like a brick house and drive low impedance loads without breaking a sweat. …

Item(s) for Sale: 1. PPI p900.4 2. PPI P1000.1 3. MB Quart Onyx 1500.1 4. Soundstream LW4.500 5. Lanzar optix3b 3 way active crossover Item(s) Description/Condition: 1. Both in great condition, pictures are of them installed in my car. Barely any marks on them. I still have the plastic protecting the logo on them. Specs are here: Power-P900.4.html'>Precision Power P900.4 (p9004) 4-Channel Phantom Car Amplifier 2. Same as the two 4ch. Specs are here: Precision Power P1000.1 (p10001) Monoblock Phantom Car Amplifier 3. In decent condition, got it in a trade, functions perfectly. I have the bass knob from an MBQ Discus amp that I can include, not sure if it's the…

1. Product: Precision Power ProMOS-450 2. Specs: Specs: 50wrms x 4 @ 4ohm 100 wrms x 4 @ 2ohm 200 wrms x 4 @ 1ohm 200 wrms x 2 @ 4ohm 400 wrms x 2 @ 2ohm Measurements 2.1" x 8" x 24" 3. Description/Condition: It is in very good shape for it's age. There appears to be very small dents in the heatsink that have been touched up by a previous owner. There are scratches on the bottom panel. I did my best to show this in the pictures. The seal is still intact on the bottom panel. 4. Price: : $500 shipped with insurance and tracking. I will ship no later than two days after payment. The shipping carrier will be FedEX. 5. Pictures:

The motor is off of a sx 15 D4 the bottom is kinda scratched up. 75 Shipped

.

Not sure how many people here know what these are used for or what they are, but I thought I would still post it just in case anybody sees anything they might be interested on. These are from a project that I had to cancel because I started college a few years ago and money became insufficient to finish it up. All prices include shipping CONUS. Paypal only please. No international shipping. Let me know if you have any question. I also take offers if you buy more than one item. heatware: slim142 eBay ID: presler142 TFC Xchanger 480 Quad Radiator NIB - $95 TFC 120mm Fan Shrouds NIB - $60 for all 4 (each includes red, blue & green LEDS!) Pentek In-…

I have a 12" SSA DCON for sale. It is a single 4ohm version, and is the newer model. The only reason i'm selling is to upgrade to a GCON since I have a little more power to play with now. Thanks for looking! $90+shipping

I decided I'm either going to try something else, but haven't decided yet one what. Try the Evil series when it comes out or something else. But I'm thinking 200 for the sub is a good price plus shipping. I'm thinking the sub is still pretty stiff since I never really put a ton of power to it.

This is one of the 18's from Lance's Yukon. I picked it up with the intentions of using it and was never able to and I need to get rid of it now haha. It is in great condition with just a few chips in the ferrite part of the motor and a small nick in the spider. It plays fine though. I'll take 410 shipped or 350+ shipping to you, whichever is less. If you're local to 76708 (Waco, TX) I'll take 325 just to save the hassle of shipping. On to the pics Small nick in the spider. Nothing big. I will take trades for a Crescendo BC2000d if we split shipping on the Zcon or a Zcon/Mayhem/BTL N2 12". I will also take a pair of Xcons or Icons + Cash. If you have any other t…

1. Product: Sundown SAX-100.4 2. Specs: 4/3/2 Channel Bridgeable Class-AB Amplifier MOSFET PWM Power Supply Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load Variable Subsonic Filter Independent 1/2 and 3/4 Channel High Pass Filter Variable with x 10 Range Selectable Switch Independent 1/2 and 3/4 Channel Low Pass Filter Variable with x 10 Range Selectable Switch HPF/FULL/LPF Selectable Switch Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable Switch with 12dB and 24dB Octave Variable Input Level Control Input Sensitivity : 200mV ~ 6V Subsonic Filter : 10Hz ~ 500Hz Signal Input and Line Out RCA Connectors Multi-Way Protection circuitry (Thermal/Over…

Includes all parts in the briefcase needed for operation. It does not have a software disc but that is not needed anymore. Simply go on to the site and download the full install to your computer, that's what I did. This includes an active membership for up to 2 computers (I will de-activate mine that it is on) which cost me $69 this year. Also includes a brand new ethernet cable I just purchased. Over $80 invested this year. $500 Shipped or best offer. Cash negotiable based on offers that come in. Do not need trades, do not need product, sorry. The Term-Lab is coming from Toronto, Ontario, Canada. I plan to have the item insured for shipping. Although my posts do …

Ive decided to go to a Sundown SD-3 shallow mount setup as family travel became to difficult with a 4.8ft^3 enclosure in the cargo space of my SUV. For sale I have two 15" Xcons (dual 1 ohm). They are both a little over a year old, purchased brand new from SSA. I originally started with one and loved it so much I ended up buying a second. But I never did get around to install it and has just been boxed up in my basement, so is brand new in box...just a year old. The one I am using in my SUV at the moment has been run with 1400rms @ 2 ohm. I take very good care of my property and so is in excellent condition. The other, again, is brand new in box. Prefer local pick…

Up for sale is a used when I bought it single 4 ohm 15" SSA DCON sub. It's in great condition showing the usual signs of having been mounted before. I bought this from Sean (W140) awhile back with no real intentions except that it was a good price at the time. I'm getting nickeled and dimed to death at the moment so I need it sold. $120 shipped to anywhere in the CONUS.

SOLD!

This have been barely used, only hooked up to test and verify that it works correctly. $250 shipped and insured UPS ground Mikro I is a mono block rated at 200w at 4 ohm and 300w at 2 ohm.Low Pass CrossoverHigh Pass (subsonic) CrossoverEqualizer with 40Hz centre frequencyLevel control allows amplifier to accept up to 8v inputRemote port with level control module and clip LEDDual rail supply for ultimate efficiencyRegulated power supply for immunity to battery voltage changeWeighs less than 3lbs(1.36Kg)

Up for sale are my 2 Icon 12s. They are the triple slug Icons with the vented pole piece and inverted dust caps. One is Brand new still in the box and plastic in side the wood crate. The other one is slightly used and has sat in my closet for about the last year and a half. The reason I am selling them is to fund my new project that will consist of Xcons. I am in no hurry to sell and price is OBO. Not looking to separate at the moment. Will entertain trades however more than likely will only take cash.... Price $550 shipped for the pair again OBO I will take offers... So offer away. Pm me with any questions offers or concerns. On to the pictures The used one is in f…

Item(s) for Sale: American Bass 1000.1 Item(s) Description/Condition: fully functioning 10/10 function 7.5/10 cosmetic, some light scratches, It has a black plexi bottom. Price: Looking for two single larger amps such as BC5500s's, an American Bass 1100.1, Ns1's DC5k's, etc cash wise I'd look for around 1250+ half shipping cont us. Shipping and Miscellaneous Item Information: Item Pictures: (List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedba…

^^^^ The xcon is a dual 2 ohm, bought it LNIB from godsmack in the summer and I've taken good care of it Looking to get $350 shipped firm or trades for a 12/15 + cash. Ideally I would like a 12 that is 4th order friendly, something like an obsidian 12 or sundown 12. Functionally this sub is a 10/10. It was running off my 2200 @ 1 ohm so it wasn't really being pushed to its limits; never smelled coil from it. Cosmetically it's a 9/10 just cause it's used and has some very minor wear on the bottom of the motor.

For sale is my Custom Ascendant Audio SMD 18" D1 Carbon Fiber Dustcap 7 Stiff Spiders. Brand new, Never seen power. A few years ago I got with Ascendant Audio and my friends at 6651 Customs in Las Vegas to build this sub. I got the parts unfinished from Ascendant and the guys at 6651 painted (Candy Green) and hydrodipped ($100 bills) all pieces. I'm selling this because I think i'm going to go a different route with my build and need the money to help build it. $850 Have the original shipping crate and will ship to continental US at buyers expense. (This sub weighs on the heavier side of 100lbs)

Getting rid of all my car audio equipment. Prefer to sell the big subs and amps locally in southern California, but I'll ship. Up for grabs: P.S. Also giving away for free 50sq ft of RAAM BXT II sound deadener ($175), 15ft of KnuKonceptz 4 gauge ($15), 13ft of Trystar 1/0 gauge ($25) to buyers while supplies last. ***(2) BNIB SOUND SOLUTIONS AUDIO SSA ZCON 15" 2250 RMS D1*** These are top of the line daily driver/competition subs. Never been used or plugged in and in original packaging. $375 each shipped. ***(2) DC AUDIO LEVEL 4 XL 15" 2000 RMS D1*** Beastly sub with clear lows and clean sound, great as a daily beater. Ran for …

Simple hammer crimping tool. Works with 6 gauge - 4/0 terminals. $25 shipped via USPS We do accept paypal or credit/debit card payments.

I have to old school Orion hcca amps for sale. The small one is the 225r and the big one is the 250r The 225r is in 7/10 condition cosmetically. The 250r is in 3/10 condition cosmetically. I've seen both been used previously but I have not test them since I got them. They are missing the plugs for the input and output. 7$ a piece on eBay. Just haven't had time to mess with them. The 225r I'll let go for 60+ shipping The 250r I'll let go for 70+ shipping. All prices are Obo. Trades welcome

Used Hertz EP1D 1000w amp, $210 shipped full specs: http://caraudiosecur...ts_id/8116.html Output Power (RMS): 400W x 1 @4-ohm 750W x 1 @2-ohm 1000W x 1 @1-ohm HP Link mode RMS Power: 1500W x 1 (4-ohm - HP LINK) 1700W x 1 (2-ohm - HP LINK) Low Pass Filter: 25 - 250Hz @24dB/Oct (L+R) Subsonic: By-pass / 10 - 50Hz @24dB/Oct Output Phase Selector: 0/180 Degress EP LINK mode: Master/Slave Bass Boost: 0-18dB @50Hz Output Filter: Continuous 0-180 @12dB/Oct T.H.D. (100Hz @4-ohm): 0.15% Bandwith (-3 dB): 10 - 250Hz S/N Ratio (A weighted @1V): 100dBA Damping Factor (100Hz @4-ohm) >100 Pre-In sensitivity: 0.3-5Volts Pre-In impedence: 15 kohms Speaker-In sensitivity: 1.4-24Volts …

Sup. I had these in the doors of my Explorer. The drivers side was hit by another car and slightly (very slightly) damaged one of the mids. The basket is a little bent and the mounting hole cracked. I fixed the crack with some JB weld and bent the basket back into place as best I could. It still plays and sits 90% flush (but if you torque it down it won't leak at all.) The other mid is in great shape. Pics of Damage That's JB weld on the basket, not cracks or scratches or anything. Here's it sitting on a baffle From the side: And directly facing it And that's without any screws in the baffle so with a little torque it'll sit flush in there. 105 + Shipp…