Sound Solutions Audio (SSA®)

We are getting closer and closer to the new GCON 750W RMS Series Driver. We have been referring to this driver up until now as the FCON as we were unsure what to call it officially. We are going with GCON, becuase it's hits the "spot". Here is a sneak peak at the motor. Sorry for the crappy cell phone shot, but this is all we are releasing at this time. Please don't ask for more, they will come when we can get the professional photos done.

Hey guys! I jus wanted to know ur thoughts on potentional power of a single zcon 15 with a saz2500 ??

Test tone at 38hz on music, peaked at 44hz. Scores on the left are sealed on the dash and scores on the right are meca (meter was on a stand on the passenger seat) I was pretty happy with no tuning at all really. Wasn't really looking to max out the db's, just wanted a base to test the sp4's against when they come in.

hey there guys, so finally i decided going with my sub, ssa zcon 15'.. i just had question.. which one shuld i go with ?? the D1 or D2??? i will be running the sub with a sundown SAZ-2500d and i want the sub to powered what it requires?? so before i go ahead and order the Zcon, i just wanted to make sure which one. thanks!!

just installed 2 brand new 12 icons. got into an accident and an object broke the plastic face. Is this just a dust shield that can be remover and replaced or patched. or will it need to be sent in to be fixed? i havnt had time to remove it from the box to see more. thanks.

Ii was just wondering if ssa sold to dealers like kicker does or if the only way you can get them is on the internet because i had a dcon installed on my moms camry and my audio guy said he really liked them and said he wouldn't mind selling youre guys products if you would allow it

Well I think Im goin to go with a Zcon 18 for my trailblazer. I have enough room for the 18 but what would be best for the box size and tuning. I know 6 to 8 cubes is optimal with 31-37hz tuning but what have you done or do you think is the best? Also how should I have the sub and port face? I'm pretty sure sub up port back. For amp and electrical, I have a crescendo BC2k and a deka 9a31 in the back. I'm not going for numbers, just straight daily. I listen to mostly rap and that's what I want it to sound best with. My max dimensions are 46w x 32.5d x 20h. thanks in advanced and if you need anymore info please ask.

I have a 2003 trailblazer lt, not ext, and I was thinking about runnning 2 18 xcons. Not a lot of people are running 18s in trailblazers because of the limited room in there. Crazycricket12 on smd forum gave me dimensions of his box. It's 21h x 45w x 30d. He's using the torres box calculator. The box has a square port in the middle of the box facing back hatch. The dimensions for the port is 10h x 10w x 12L. It says port area is 100 ft2 with tuning at 32.75hz. The total net volume only excluding bracing is 12.41ft3. Would this work??

Back in Oct. 2010 I had a box designed for an 10" Icon at that time which I became pretty busy and never got a chance to buld it or buy the sub. Since then I've noticed the Icons been revised, I'm wondering if I should get a new box designed or if the new icons are pretty much the same as the old icon specs that the design I have will be fine??

are Dumax and/or Klippel measurement reports available for the Zcon series? Particularly interested in the 12".

Phase one of web upgrades comes at the perfect time. The turn of the new year. A radical new look for the homepage was made. Hope you like! All of the enclosure designs (downloads) are completed. Much easier to find information through tab browsing on the product pages, and we are now featuring a new video and team member on the home page monthly! If anyone would like to be added to the rides section, plesae send in your photos and system info to [email protected] Enjoy http://www.soundsolutionsaudio.com

Hey. I saw the weight that's listed in the store, but is that with packaging? Anybody know what's the weight of the 12" and 15" Xcon?

Hey, what would be an appropriate ported box and port length for 2 Dcon d4 12"s. I have ~ 1000 watts coming from a Rockford Fosgate 1051s. I did see the boxes listed in the tech section. I just wanted to make sure I read it correctly.

I recently picked up a used 12" SSA DCON and finally was able to find time to install it this last week. In this installation, I am running: Subwoofer: 12" SSA DCON single 4 ohm Enclosure: 2.00ft^3 tuned to 31Hz with a 4" aero port Amplifier: MB Quart DSC1500.1D at 4 ohms (375rms) I initially had low expectations, as this was my first single 12" installation. In addition, I have never used a low-power "entry class" subwoofer. After listening to this little guy for the last week, I must say that I am VERY impressed with its output and sound quality. I did a direct swap between a 15" Fi SSD and this 12" SSA DCON. The Fi SSD obviously gets louder, but the 12" SSA DCON is de…

Picked up a Dcon D4 for a really good price to throw into my little .6 sealed box. Wasn't expecting much,WELL I was wrong. I turned it up and it started to make my ears hurt and set off the neighbors alarm.Now I haven't adjusted the gain,etc,just wanted to make sure everything was working.Look like I have some fun ahead. I do have a question...Should I run it with 450rms or the full 600rms. I have been told that 600rms is no problem?

Welcome Home Xcon 10's.

i see that the free xcon enclosures have an optimum ported, but no dual optimum ported. regular ported is 2.6 cubic feet, what would be the optimum ported enclosure for 2 xcon tens?

So i was waiting patiently for the Xcons to arrive. After working for 26 hours i had to stay awake to make sure they made it into the house safely. Of course i got the same ol' thing from the driver, "This thing is heavy as hell" talk. As i put down the second sub i noticed some prick penetrated the box!! In any other scenario this would be normal but not this time. This is what i saw... My first thought was,"OH SHIT!! that better have not gone through the surround!!"

1920*1080 wallpaper one 1920*1080 wallpaper two Pictures a bit grungy / grainy, I don't have space at the moment to take proper photos.

Well I have had this thing for a little while now, and yesterday i had a fire lit under my................... Anyways i decided to install this thing in my old box i had my ICON 10 in, dont remember exact specs on it right now. But powering it is a Sundown SAZ-1500. I am working on a new enclosure that will be ported through the rear arm rest (blowthorugh style i like to call it) Vehicle is a 2001 BMW 330i. On to the pics and vids.

Hey every one i orderd a dcon 12 on november 20th and i dont want to sound like im in a hurry but... i wanted to ask people that orderd the dcon in the past about how long it took to get it and thanks in advance for all that respond

I have 16.72274606 cubic feet available (calculator copy/paste ftw). I want new subs. I can do 4 15" Dcons sealed...Idk about ported. I could squeeze 2 18" Icons ported, or easily seal them. I could port an 18" Xcon. Mainly I'm wondering how much I lose by going sealed. So Dcons or Icons do well sealed? Throw some ideas out there!

I'm looking at purchasing either an Xcon or a Zcon. The Xcon is listed as having an aluminum shorting ring in the motor. My question is whether the Zcon does or not? I am assuming that it does not have an inductance demodulation circuit in the motor since it is not listed under the features. Can anyone confirm this please? Thanks.

Has anyone purchased or done an install with a 10" xcon? If so can you post your feedback or info.