Sound Solutions Audio (SSA®)

When the new icons come out will I be able to get mine reconed and matched to a newer model so I can buy a new one to match? I will also need mine changed from d2 to d1.

I have my amplifier's gain set around 2500wrms. My commute to work is 50 minutes one way. I have been pounding on my XCON now for about a month (atleast a full hour a day) with well over rated wrms. So far it sounds clean, no mechanical noise or distortion that I can hear. The cone does get warm but no stinky. No coil rub at all. I need a recone due to a cosmetic flaw on my part. I accidently got expanding foam on the cone which has not affected anything but looks. So I figured on would pound on the sub and see what happens. So far the sub works flawlessly. 3" aluminum coil ftw. Good job to SSA. There is no doubt in my mind that this sub will function beautifully for yea…

Ok, I have done a lot of mods as of late to my Galaxy S Andriod Phone, and ended up making some cool wall pappers for home screen, and messaging screens, just wanted to share what I have so far. I'll update these as I make more... Right Click > Save As > then download to your favorite phone. (of download directly on your phone) My Favorite

Got my new shirts in!!! They look amazing!!! Thanks guys!!!

Hello everyone! I had an Icon 15 in a ported enclosure in my old ride and loved it. I would have loved to have had it in it's optimum sized ported box to see what it could really do, but the 3.75 cubes tuned to 34hz sounded kick ass anyway and got nice and loud. I had it powered by a 1200 watt JBL amp. The car I have now unfortunately can't fit the the Icon 15 enclosure height wise. I was wondering if an Xcon 12 in it's optimum sized ported enclosure tuned to 33 - 34hz powered by a SAZ-1500D V.2 could get as loud as my previous Icon 15 due to more motor strength?

I bought an SSA Icon 10 from my son a while back. My son is SQJEEP here. We got around to building the box for it. We used the box design in the tech section. Fantastic box design....We built it exactly to the design and holy shit this thing pounds. We did the 1.35 cubes. It's not finished yet but here are some pics.It's running off a Zed built Usacoustics USA 2150 bridged and rated at 500 watts. Please note....The panel sticking up in the back is the amp rack and it is going to be replaced. It's the old one and it's just in there temporarily. Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01

LET ME Know What You Think

Mark, This is in reference to THIS TOPIC.... I looked in the store but I cannot "order" or "add to cart" the 15 inch Xcon. Just curious about the shipping method since I need to ship to a P.O. box. Please let me know what we can do. Message me or respond here if possible. Thanks, Danny Also this: Just to make sure, enclosure recommendations is 4 cubes ported.... Inner dimensions I came up with are as follows: H: 16in W: 25in D: 18.5in is that right???

original original Anyone else got some dcon, icon, xcon, love?

Im looking for a good amp to power 2 12" SSA ICONS in a 2.35^3 sealed box for a nice daily driver application. Will the Sundown SAZ 1500d v.2 be enough to power those ICONS? I am not overly concerened with extremely high SPL just a nice punchy daily driver with a good mix of SQ.

Ok guys I have been looking at the DCONS for quite a while now and my birthday is comming up and I am looking at getting 3 of them for my truck and the amp I am looking at getting an audio que 1200D to power them all Do you guys think that will be enough power for them all also I will be making a custom box it will be 8 inches deep 59 in across 25 inches tall for the 3 12s do you have any ideas on what to do with the inside of the box build different chambers for each sub or put holes in the different

Dear SSA techies, I am going to be running my 15" XCON in a ~2.5^3ft sealed enclosure. I am curious if when the 15" ZCON is available will I be able to do a direct swap in my sealed enclosure? Thanks, edub

We only have a handful of Xcon's left in stock, so if you are looking to grab one, do it now before these are gone until the supplies come in.

Letting you all know about our group on AA. The site is getting very close to launching officially. Come check us out over there! http://www.audioaddicts.net/index.php/community/groups/viewgroup/2-Sound+Solutions+Audio.html

here's a shoot of one of my doors I just finished!! First ever Customization. Might fiberglass in near future if I buy another set of the Cadence Mids

I was asking a question on "that other forum" about some different setups and this was one of the replies that I got: So the 10" Dcon isn't a good sub, and the enclosure built to optimal specs isn't efficient?

The build house is caught up and all Dcon's are shipping out this evening or first thing tomorrow morning. Those who are interested, send me a PM, I am offering a $10 SSA Store credit towards a future purchase as a thank you for holding on a little extra time for the delay. The Icon's are still on the way, but there are a couple more parts that are held up before production can start and a final prototype has to be tested to make sure everything with this new version of the Icon is all buttoned up and ready to roll before production. There are around 6 or so Xcon's in stock. After those, there is still a wait on steel supplies for them, ditto on the Zcon's.

First competition will be today. I'm entering with my Ssa icon 15s. Will let you guys know how they turned out. http://www.bassbattles.com/

Heard on facebook there was a delay on some subwoofer parts, I think this has affected the xcon availability? If so, when will the D1s come back in stock? I will be ordering 2 very soon. Thanks

Going for a new mid highs setup!! Taking out the ken woods. I have two SSA Icon 15s for my lows. Looking for 2 6.5s and 4 6x9s... And I'll maybe keep my crescendo super tweeters. Any suggestions?? What would yall put in y'alls ride if you had a price limit of 250 for each. (I want to hear about y'alls goals) saying you had two 15 icons!!

Or should I just go with two xcons or maybe even a zcon if they ever decide to release it.

Forgive me if this is a redundant question but I am curious what is the minimum mounting depth I can get away with for an ICON 12" sub? I know the optimal sealed is 1.35 cu ft and the minimum depth is 6.5". Provided I can get my cu in length what is the minimum depth I can have for my enclosure? Can it be 6.5" in depth? Cheers K

After our monthly crew meeting at work one of my coworkers was driving in front on me. We both ended up at the same bank and he came up laughing at me. I asked him what was up and he said he could feel my bass on his back in his truck while driving in front of me. Thought that was pretty funny with 2 15" xcons sealed.

What's up guys. Looking to do this install in my 2000 Dodge Intrepid. Having figured out the exact box demensions but looking at somewhere around 2.2 cubes @ 32hz. What are you guys opinions and suggestions? Anything is appreciated! Thanks.