Sound Solutions Audio (SSA®)

As I'm still going through early stages of planning for my upcoming system, I have been trying to figure out the subwoofer combo I can come up with to maximize the output of my vehicle. And as I was looking at different drivers, wanting to stay with SSA, I thought I was set on 6 12" zcons. But for shits and giggles, I looked at the SMD driver as well, and noticed how much less space they require when comparing. Utilizing the demensions I have available, I could potentially comfortably fit 4 18"s SMD drivers. So my question is, being a die hard SSA fan, I was wondering if there are any works in producing a simliar driver. I won't be ready to purchase for at least another 8…

We need some updates on some scores using these bad ass SSA Subs. What kind of numbers are being put up using the Xcons now that they have been out awhile? How are they holding up? Numbers on 12s, 15s, 18s would be nice. Lets go SSA guys!

Got my Zcon 15' D2 today nd my god... WTF is this BEAST!?!?! This monster is SO huge i have never seen anything like this!! My old sub wasnt even half the size... When i took off the plastic nd placed it on the ground i just got stuck looking at it for a good 10 mins. Im really scared now... For my car that is! This beast will tear it apart in no time!! Cant wait to get this in and running!! Thanks alot SSA!!

Okay I have a icon 15 and inverted with the basket outside of the box and today as I was getting outta my truck, I touched the magnet and it was considerably warm.., s this normal or is the sub getting too hot?

How low can two 10" Dcons go?? I wanna make a ported box tune to 30hz but I listen to a lot of hip hop, dnb and dubstep. So, I want them to hit low, to vibrate my car pretty good(94 Corolla sedan). The power is 500w rms.

I am thinking about getting 2 DCON 10's D4's and wiring them to 4 ohms and my amp is 1000 watts @ 4 ohms and I want to know is 500 a piece is to much for these, also what will be the best size ported enclosure and what should I tune it to

how much would it be to put a new dust cap or cone( or whatever the correct term is) on a 15" ICON? It is brand new only played music for maybe 30 minutes im guessing and then a friend put a beer on my sub without me knowing and it hit and now has a huge crack in it. sucks to not have it in after all the waiting ive already done.

I have 270 alt. Big3. 4gauge wires. Kicker 750.1 I plan on running 1 this month an how much clean juice can she take? Hthinking about picking up hi phonics brz2100.

I am trying to get my 15" xcon reconed, whats the best email to get a hold of SSA? Thanks for any input!

hi id like to order an ssa subwoofer (maybe xcon) but how to do so? i live in europe.

im sure mark and aaron youve heard it how does it sound? because yea just wondering. those are the subs im debating against

Finnaly pulled the trigger and ordered a mighty XCON!! I love what you guys are doing and I can't freakin wait to get my Xcon!! The sense of community is really one of the many things I really like most about you guys and I love supporting the smaller business. (Especially when they have the capability to kick the arse of most of those mainstream companies!) Been out of the game for a while and it really wasn't like this last time I had a system. I was so close to getting JL its not even funny. Thats before I stumbled onto the SSA forums and the rest as they say is history. I've learned a lot from you guys on all of the different SSA froums and I truly appreciate it!!…

i got it workin thank god! i couldnt get it by myself so i let a local shop do it. he says its runnin at 1ohm. but it was goin into protection the way you showed me. so he hooked it up to both channels still with 1000rms a piece. and my god is it loud! pics will be up soon... i hope its acceptable to wire it this way. thanks for the help pics will be up soon.

Hello everybody, I made up my mind : I really want to buy the 15" SSA Icon sub. I receive a few messages of AAron, but I am still waiting with my money burning my pockets :bigclap: I cannot order from the website because of the shipping info needed. What a pitty I know it will take a long time to be shipped over here in the Carribeans, but I want it, and that's it !!! I already know what kinf of enclosure I will build : a simple 3 cu feet sealed enclosure. I would like to try it ported, but it needs more room, and I don't want to go over 3 cu ft. If you have somme advices, I take everything! Don't worry!

Is this like a Bass eq or a gain knob? It has a clipping indicator which I've never seen on a Bass EQ knob. Oh and my install is nearly finished. I ran short on power wire (6" short uggh!) so I ordered some more. I would pick it up locally but it's hard to do with 'rona around

I would like to know if it would be a waste to get an ICON and run it in a sealed box with only 800wrms ?

I just gotta tell you guys that after i think 8 months of owning this i FINALLY got it in my truck. I had never heard of you before this sub and let me just say that you definitely exceeded my expectations! This thing hits and HARD. I know exactly where Ill be going next time I need a sub!

I have a customer that wants to use either of subwoofers mentioned for a silverado install. Which ever model is used is dependent upon which subwoofer will fit given the design of the enclosure and the customer has already told me he has tired to obtain the same information with no response.

I was wondering if anyone has any experience with a 10 inch ICON in the single ported enclosure sold in the ssa store? It seems to be a little small for the ICON

yesterday i took my box with my icon in it out of my car because i had a leak in the trunk and it ruined part of the box. and when i took out the icon out of the box i noticed that the bottom magnet had cracked all the way around it. is this something to be worried about? sub was in a box 1.35 cubes at 32hz pushed by a saz 1000d set at 1000 watts. and the sub is no more than 3 months old.

Wondering when the Icon 10's will be back in stock and possibly with the new dust cap??

So i have 2 icon 10s sitting around at home. Not using them. But my car won't support an amp for two. So i am going to build a box for just 1. I was talking with a friend who builds boxes all the time. And we were talking about a box for one of them. I was thinking sealed since i listen to all types of music but i like to get loud too. But he seems to think that a 7th order box would be best. What do u guys think? Has anyone but an icon in a 7th order box? J/W thanks guys

I may be totally blind, but I could not find this stupid spec anywhere....what is the mounting depth of the 10" Icon. I have .6 cubes per sub and a mounting depth between 5.25" and 5 7/8". thanks.

Icon 12 2.25 cuft @ 35 Hz

can you turn a 12 inch icon into a 18?