Sound Solutions Audio (SSA®)

http://www.soundsolutionsaudio.com/store/categories/Sub-Woofers/SoundSolutionsAudio/XCON/ Re: 3.7 Fs: 33.2 HZ Qms: 4.87 Qes: .37 Qts: .35 Mms: 202.5 g Vas: 15.27 l Sd: 310 cm^2 Bl: 20.65 Spl: 83.7 1W/1m Xmax: 29mm Wattage: 1750wRMS Displacement: 0.15 cuft 10" Enclosure Recommendations Sealed: .75-1.00ft^3 Sealed Optimal: 1.0-1.25ft^3 Ported: 1.25-1.50ft^3 @ 27-34hz Ported Optimal: 1.5-1.75ft^3 @ 27-34hz Outside Diameter: 11.000" Inside Diameter: 9.250" Mounting Depth: 6.000" http://www.soundsolutionsaudio.com/store/categories/Sub-Woofers/SoundSolutionsAudio/XCON/

Man I had to list this on here for people. Killer deal here! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110617679132&ssPageName=STRK:MESELX:IT How much power do these need to get moving? Also does anybody know how they perform compared to an ICON series sub? Thanks.

I just got my ssa xcon 12" and all i had was a 250 watt amp so I hooked it up to see what it sounded like and omfg this thing is really the best sounding subwoofer I have ever heard and got loud of the little power I gave it , so now im looking for an amp to power this beast. It is a d2 so any suggestions on a good amp besides sundown ? Thank you. Bavarian Beast.

Hey, here very soon I will be buying an xcon, the problem is i drive a 1995 honda prelude and the trunk is not very big at all and to put a 15" in the trunk i would most likely need to build the box inside the trunk, and I've been through that before, it sucked. my question is how much of a difference would there be between the 12 and 15? it would be hooked up to an saz 1500. thanks Jordan

I was wondering why the Xcon is able to have such a high BL despite only having a single magnet slug?

Here are the results to the SSA xCon 15" sub woofer in WinISD the enclosure is 4.0 cubic feet tuned to 28hz, I hope this helps. I noticed no one else has one out yet and these always help me greatly.

will the xcon handle 3000rms?? i know it says 1750 rms but i see alot of people over powering it? and can u get any upgrades on this sub >??

My brother just bought a ssa xcon 18 from mark and a audioq 2200d it is going into a trunk of a 09 dodge charger. the box is being built tomarro should it get really loud.

Added some great video's from through out the net from SSA customers and team members. Trevor from PTS made the front page. http://www.youtube.com/user/SSaudio1 If there's anyone out there with a great video of an SSA product that we missed, let me know and i'll add it to our channel. Thanks for your continuing support!

I almost had a hear attack a second ago when i went to the ssa home page. My speaker volume was up pretty high and all the sudden i hear gunshot sounds. Haha damn fireworks. Has that happened to anyone yet?

Our very own Dr. Lindsey's YouTube channel kickoff video! Show her some support, and go to her YouTube channel and hit the subscribe button. #ArriveLoud http://www.SSAudio.com Dr.Lindsey_SSA YouTube Channel: https://www.youtube.com/channel/UCWMBKrOufGKcvPeJLFaHG3A

Name will be finalized shortly, as will specs, price and availability, so if you ask any of those questions I don't have an answer just yet. This is long over due, as we have needed an 8" sub for a decade now. Those of you who have been along for the ride, might remember we had a Dcon8 built 9 years ago, but production never happened due to cost of making it here in the USA. Production has not been kicked off yet, but we are VERY close. Some minor changes inside (unable to be seen from photos below) are being made to the design before we kick off. I am very pleased from the performance of the prototype and the output is very strong for an 8. It is a lower Qts.…

6.9 cuft@32hz. 101.75sqin of port. I shortened it by about 5 inches, widened it 1 inch, and made it 1 inch deeper.

We are going to be keeping a 30 driver inventory on hand for more efficient shipping time. This will be a great buffer between SSA and the build house, so in most cases after our inventory arrives, SSA subs will have a 24 hr shipping time frame! This is all in effort to get YOU, the customer a better shopping experience! :drink40: :drink40:

I feel really dumb asking this, but are the prices on the Dcon what they always are? I can't remember from when I bought my first Dcon, but they seem to be lower than I remember. If that's the case, then I know what I'll be getting for my birthday (a 12" this time).

Where can I get a new surround for a 12" icon? How much are they? Will it be hard to replace witht he fact that they have a paper cone?

Here are the T/S Parameters we promised: ICON 10" SUBWOOFER DUAL 2 OHM COILS Re 1.5 per coil (specs measure in series 3.0) Fs 30.7 Qms 5.60 Qes .41 Qts .38 Mms 190 g Sd 310 cm^2 Vas 19.1 l Bl 16.4 Spl 83.1 1W/1m Xmax 20.5mm Wattage: 1000RMS Displacement: 0.12cuft ----------------------------- ICON 12" SUBWOOFER DUAL 2 OHM COILS Re 1.5 per coil (specs measure in series 3.0) Fs 29.9 Qms 5.87 Qes .45 Qts .42 Mms 212 g Sd 480 cm^2 Vas 43.7 l Bl 16.4 Spl 86.0 1W/1m Xmax 20.5mm Wattage: 1000RMS Displacement: 0.16cuft ---------------------------- ICON 15" SUBWOOFER DUAL 2 OHM COILS Re 1.5 per coil (specs measure in series 3.0) Fs 26.4 Qms…

So when are these team EVILS available?

First off I want to say I'm not trying to start anything just a thought that came to my mind. As a team are you guys more the daily/ground pounder type? I know ssa subs are geared towards sq/groundpounders so I was just wondering if you guys do the sq thing or if you do go for numbers?

First video is rendering, we got a ton of footage down there on mulitple camera's, going to be putting a hand full of "win" video's together tonight. First up is the Team SSA Blazer owned By Justin a.k.a. "Jesus" Stay tuned.

In the next few days we will be adding a Technical Section to the home page. here you will find detailed enclosure plans for all of our subs; ported, sealed, dual ported and sealed Here's a taste of whats to come. of course, if you need custom designs built, contact JBLCAMRY, he'll be happy to help out out. (for a small fee or course)

I bought an SSA Icon 10 from my son a while back. My son is SQJEEP here. We got around to building the box for it. We used the box design in the tech section. Fantastic box design....We built it exactly to the design and holy shit this thing pounds. We did the 1.35 cubes. It's not finished yet but here are some pics.It's running off a Zed built Usacoustics USA 2150 bridged and rated at 500 watts. Please note....The panel sticking up in the back is the amp rack and it is going to be replaced. It's the old one and it's just in there temporarily. Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01 Shot at 2011-05-01

got it a couple days ago but my camera batteries died off