Sound Solutions Audio (SSA®)

About to do a build for a 15" evil to ran by a AQ3500 I'm thinking about 4cubes and 65sq of port at 34-35hz. What's you guys take on that open to better suggestions.

hey guys i am going to order a 15" Icon but im not sure what voice coil i should get to get a 2 ohm load on my amp. also when i make my box would it be better if i put the sub on the left side and the port on the other, or should i put the sub in the middle and the port on the side? oh it will be a 3.8 cu box what should i port it too?

just a feeler as to what everone is running their 15's as far as box and power.im going run one with 1000w at 2ohm.i see the rec. box range between 3.5 and 4 for optimum 27 -33hz. i have the space ,would i get noticeable differance . how does 4cbs at 30hz sound any feedback is good.

hi , i am wondering has anyone tried putting a 15" icon in a sub up port back type enclosure in a trunk car. i would really like to use a 15" but my trunk height is only 15.5 inches high so this is the only way that i can think of.

How much would it cost to recone an ssa icon 15"???? thanks in advance

well i have had my Xcon for awhile now and just love it ( it sounds really good right now )... i have it hooked to my Hifoincs BXi 1208d... 1200 X 1 @ i ohm... i had this amp when i bought the Xcon, it is a couple years old.. so anyway what i am wanting to know is.... will i notice any changes in sound or output if i buy like a SAZ 1500d or another quality amp that does 1500 watts ? ( is it worth the money ) it is ia a 4 cube box ported to 32hz.... i read the post on the guy who built a sealed box for his Xcon... i mite build a sealed box and see how i like it... i listen to alot of rock... nickleback... metallica type music... once in awhile some rap just…

I am gonna be building a sealed enclosure for my 15" xcon it will be powered by 300rms Its gonna be going in the front of my living room, Should I fire the sub down or point it at the wall? What size should my enclosure be for good deep bass response in a sealed setup? Any ideas or tips?

Hi I have someone who has heard of SSA and is interested in 15" ZCON He has a SoundStream DTR 3400.1 tower amp Before I tell him to order the sub.... I'm wondering if that sub and amp match well together? and which ohm to run the sub at? and the perfect box size assuming the car has unlimited space? the only reason i told him about the ZCON is because its the best of the best

I have 16.72274606 cubic feet available (calculator copy/paste ftw). I want new subs. I can do 4 15" Dcons sealed...Idk about ported. I could squeeze 2 18" Icons ported, or easily seal them. I could port an 18" Xcon. Mainly I'm wondering how much I lose by going sealed. So Dcons or Icons do well sealed? Throw some ideas out there!

I'm posting a few pics from this build for a friend of mine that drives for aliving. He wanted some serious bass in the truck so i provided him with the subs. A local shop in Northern NY did the install, here's a few pics of it. Head Unit: Pioneer AVIC-N3 speakers: RF power 6.5 components Subs: SSA ICON 15D1s Amp: RF T20001, RFT 4channel

What's the optimal box volume and port area for Xcon 18". I plan on going for 6cft net cause space in kinda tight.

Just got back from the AZ Sound USACI show. Got first in my class, I thought that score was respectable, but..... Next weeks show i'm adding a audio control line driver and gonna tweak a few things see if this daily driver set up can break into the 150's...anyways, here's a few pics of the score...

So heres the deal. Ive been waiting on the IA LI 10s to be released and take advantage of the free enclosure deal. SInce there is no real date to be released yet, im pondering the idea of doing 2x 10" Icons and powering with a SAZ-1500d. Quentin drafted me up a box to suit my space and came up with 2.5ft^3@32hz. My question is, will 750wrms a piece be enough for these to really shine? I currently have a 12" Q in 2ft^3@32 off the same amp. Im looking at changing my setup and going for more output. Does this sound like a reasonable option? I dont want to drop the dough and not be 100% satisfied. Thanks!

2 10" SSA Icon's I want ported, firing back in a trunk setup. Newer model Chevrolet Impala, so I have a lot of room to play with (in terms of the 18 3/8's width given, I can go more). Should I stick with the pre-designed enclosure numbers or do something different, because I have the space? 1k to each subwoofer. Hip-Hop & R&B - All the lows I'm getting someone to build the box so I only have 1 shot at this, so to say. Thanks guys.

I have a 98 s10 ext cab, have not chosen box specifications, or an amp yet. For the amp I'm thinking about getting a 1500 watt audiopipe. For the box I plan to go ported. Which would be louder and with deeper bass 2 12" gcons which are 750 rms or 1 12" icon which is 1250 rms?

Im looking for a good amp to power 2 12" SSA ICONS in a 2.35^3 sealed box for a nice daily driver application. Will the Sundown SAZ 1500d v.2 be enough to power those ICONS? I am not overly concerened with extremely high SPL just a nice punchy daily driver with a good mix of SQ.

I'm getting 2 12 ssa zcons. Going to put them in a 1998 Honda civic in the trunk. Need some ideas on a ported box for it.

So I have been thinking, If I wall off behind the second row I should be able to get about 14 and a half cubes. Subs on the outer sides and 200sqin of port in the middle. I would be uprading the electrical, with h/o alt, big 3, and atleast 5 batts(1 up front 4 in the back). Another saz 1500, and a shit ton of deadner. I will be upgrading my fronstage as well. I am hoping to do atleast around 146 or so. That would be double the cone area and double the power, aswell as aupgraded electrical. What do you guys think????

I have a 2003 trailblazer lt, not ext, and I was thinking about runnning 2 18 xcons. Not a lot of people are running 18s in trailblazers because of the limited room in there. Crazycricket12 on smd forum gave me dimensions of his box. It's 21h x 45w x 30d. He's using the torres box calculator. The box has a square port in the middle of the box facing back hatch. The dimensions for the port is 10h x 10w x 12L. It says port area is 100 ft2 with tuning at 32.75hz. The total net volume only excluding bracing is 12.41ft3. Would this work??

I'm looking for the most output in the trunk of a Nissan Maxima. On a SAZ-1500D the options are a pair of 12" icons (4 cubes @ 30hz) or a single 15" xcon (4 cubes @30hz). SQ is not a factor because it is not relavant to my goals. I only listen to rap and R&B, so "lows" are not an issue. Just looking for a daily ground pounding system. I hope I've provided enough info. Thx

i was thinking about getting 2 icon 12s and i was wondering what would be a good amp to run them? i would like to stay cheap but i want a good quality amp. it probably be in the loaded enclosure from fisher customs. so the specs of that box

We have two of these left. Come and get them! BNIB http://www.soundsolutionsaudio.com/store/products/15%22-SSA-ICON-15D1.html

I know the "is X better than Y" questions are annoying, but I'm looking to upgrade from my current set up and the DCONs seem to fit the bill. They fit the budget of $300 and the RMS ratings line up. Everything else I've looked at has much higher RMS ratings and would be better suited to running one sub off of the amp. For substage, I'm currently running four RE Audio REX 8" subs sealed in .42 cu ft each. They are being driven by an Alpine PDX-1.600 with 600w RMS (birth sheet says 666w, it's the Amp of the Beast). Overall, I have been satisfied with them - if do upgrade, they will go into my Silverado. That being said, I'm looking for more output and an upgrade in o…

Hey what's up SSA family, I'm new to the Ssa subs, but wanted to try them out!! Heard a lot of good things about them. I know you guys are thinking it will be a tight fit, and I'm ready for the challenge. Just wanting to get some input on what amp I should go with? All opinions accepted!! Will do build log!!

I finally took the time out to measure my trunk for a box for my brand new still in the box 2 x 12" Dcon d4 subwoofers. This is going in a 1983 Cutlass Supreme. Height: 14.75" Width: 38" Depth: 21 &1/2". I have no idea how those measurements would convert into cubic feet for the subs. Will a box built to these specs work with these subs? Amp is a Rockford Fosgate 1051s rated at 1100 watts bridged. I jumped the gun and ordered subs before measuring. I realize the trunk is wide but not tall, so box height would be limited, which makes for a somewhat smaller box. Probably should have gone with 10"s. But I'll try to work with what I got. I know in terms of sou…