Ascendant Audio

okay so i was wondering what i should do...the gains were set with an o scope, everything installed correctly, box size was good, no clipping ...it literally just tore straight in half...has to be one of the colest things i have ever seen...everything looked right in the box but when i pulled it out the cone was in half..i know there is no fixing it but i was wondering if maybe i could just get a new cone/dust cap put on the old basket ....by the way it is a 12" aresenal......i still have the voice coil and spider and the motor and basket are still in mint mint condition and i feel it would be a waste to just throw it......so can i "fix" it anyway or should i just make a …

Just ordered a Havoc 18 to replace my 4 tens. I will try to do some kind of review when I get it, although the only thing I have to compare it to will be my 4 tens. Wish me luck!!!

What do you guys think i should get? 2 15" BTL or 2 15" SMD. Not for SPL but i want my daily driver to hit. Im getting a sundown 3500 for which ever i choose to go with. Is the SMD more expensive then the BTL?

have fun

Anyone have T/S and other specs on these guys? Looking at picking up a used one for my Dad Thanks!

I got them today alomost got them in finishing the install tomarerow they look great cant wait to hear them in my truck goign ot be sick. O and when did the subs come with pics that that was bad ass

I was just curious what sizes do the sets come in 5.25in, 6.5in. 7 in, 8 in, etc? Also is there a passive crossover included or do i need to build one myself? (I'll probably be running active but just want to make sure at first). Also, what are the tweeters? The last time i remember they were Morel, and from the other comp sets i've seen they look like Morel tweeters. Thanks, Julian.

Well, it has been almost 1 year since the new line of subs and speakers were suppose to be released, and it has been only a few months since the subs have been on the market and the website has not been updated since about December 2006. Most threads on the forum have been directed to Fi to resolve problems, concerns, or questions. As an AA fan I would like to know what the future holds for AA. Will the company remain or melt into Fi. I'm not upset, just curious as to what Chad and the rest of the company has planned. More to come.........

I am looking for a monster sub. either FI audio or Ascendant audio. I know they are in the same family but they make great subs. I am chasing a great sounding sub that can still achieve good numbers on the meter. My choices are the Mayhem or the SP4 What do you think about these subs based on my goals? Please only those that have experience with each.

i wanna know how the havoc compares to the fi bl. i have the fi bl but im thinking of switching to the havoc. im not sure though because ive never heard the havoc but by reading the reviews its way better than the q. is it better than the bl? how so?

Hey guys, i wanted to know guys think a 15' aa mayhem would fit in my hatchback mitsubishi eclipse 99... And what amp do you guys think would be good with that sub? I was thinking saz 25/30/3500?? And if you guys have an amp that would compliment the sub i would be more then interested to purchase! Thanks

Hello, I'm new to the forum and would like some help with a box for an 8" assassin. I was wondering if someone would be interested in designing a slot ported box for me that would fit in the following dimensions: 17" wide by 14" front to back. I am not too concerned with height, just dont want to go over 12" if possible. The box is going in a 2007 Frontier Kingcab, behind my driver seat. I think the specs on the AA site say .5@35, but have read threads where people are saying .6@40. I mainly listen to rock/alternative music if that helps with the tuning. I am getting ready to order a new one next week from the TeamSSaudio website, and would like to build the box before it…

Im currently wanting to try something new and I was wanting to know what would be a better choice.. I have 2 5000rms amps for each 12" woofer I intend on using. So Im wanting to a setup with 2 12's and its between the AA Mayhem or the Fi BTL 12".. I dont have any dealers of AA in my area and it don't seem like they do much of the speaker customizing like Fi does... So whats everyones input? BTL 12" vs. Mayhem 12"?

Something seems slightly wrong on the AA website regarding the dual 2 ohm AA Chaos 10 inch. Using the T&S figures given on site the box size for a sealed enclosure seems wrong, when I calculated it out if the box is 0.6 cu ft (min. size) the system QTC is 0.55 which is of course very low and for 1.0 cu ft (max. size) the QTC is 0.49. So what is wrong the T&S figures or min and max box sizes.

I recently got 2 of the new Havocs with the solid pole and improved cooling, and I must say these subs are AWESOME. I've owned the older model havocs before (2008) and these are much better! Each is powered by a RF T1500-1bdcp (1800+ rms) and they seem like they need more...LOL. Box is 11.85 after displacements tuned to 29hz. No vids yet be will have some soon

good evening . ive bought a Ascendant audio mayhem 15 dvc 2. now is my question in what size of box it will operate it best. y want a ported box tuned between the 40 and 45 hz yust allround music tuned. here are the t&s http://www.bladeice.com/mayhem.php and how much diverence makes it to makes it lower. y mean is the size of the box the same as on higher freqs like above. and y have to change only the port . y hope you can help me. y heard allready 2 difrent sizes so y hope you can help me to make tje right choise thanks allready grtz erwin.

Im looking for the Chaos sub specs, the website doesn't show them just the other models. Assassin, Arsenal, and Havoc. I have 2 1000 watt amps and was think of going either Chaos or Havoc.

Hi guys, here is an attached pic of the box i'll be soon going to get made, Using .75" MDF and .5" mdf for inner port walls. The box shape will remain unchanged, took many hours to decide the slot port for this. And new suggestions opinions are welcome.

What's up? There hasn't been much going on around these parts. I figure I'd kick up the dust and ask is tjete anything in the works or is Ascendant Audio getting wrapped up? I did a quick search on the net for Ascendant Audio, but nothing. :/ Hope to hear some interesting news.

Im one of those guys who can look over some t/s specs and not know what the hell im lookin at lol.. Basically AA is new to me, i went straight for the Fi BTL, but ive been seeing these for sale locally lately (craigslist) and im curious.. For the most part i need to know what each sub is good for.. as in SPL, SQ.. Ive been eyeballin these 2 havoc 12's but dont really want to buy them knowing nothing about them.. AA is a good name, that im sure of. just need more details, if someone could point me in the right direction i would really appreciate it. At the very least someone who knows the havoc series please fill me in.

just the soft parts.. need one price shipped to 13214 please pm me

Havoc 18 runin on like 1.8kW ....

Aight I was bumping hard for bout 20 min or so, and then all the sudden my sub just stopped playin, and my whole car smelled like.. well you know. Rotten eggs or something. Amp is still on perfect, all connections checked. I know what happened, but I guess I just need someone else to tell me so I'll admit it.

Hi I want to buy a couple SMD 18's for my next build but I cannot find any They are the baddest subs ever and I need them I do not want used I want fresh built Does AA ever intend to build these again? Can I pre-order the V2? Thanks

I got my arsenals today they are a pair of 15's