Fi Technical

I am thinking about putting an FI Q 15 in a 2 cubic foot sealed box. I think that this size is on the bottom as far as recommended. Does anyone know how well the FI Q performs when it comes to small boxes like this?

Hi, Subs are 2 FI ssd 12 D2 BP Power . I know they are recomended for a 1.8 to 2.5cf box, Due to the room available I can only go up to 3.17cf after displacement and bracing with 50sqin of port. tuned to 33.5hz? Do they perform well in smaller than recomended enclosures? will be running about 2.5krms to them Thanks

Is the recommended sealed cabinet size of 0.2 to 0.6 cu ft after displacements given in 2007 for the high QTS driver. Also does anyone know what the high QTS is

What is the cabinet size for a Fi SSD 10 high QTS version

i suck at understanding ohms. i have 3 Fi Qs DVC and i want them to still maintain 1.4 ohms when i put them in a crescendo bc2000d amplifier. do anybody know how i should wire it. thanks for taking your time to help me

What are some specs on the ufo style btl 18"? As i cant ind them on the fi site. It was built in 2009,fully loaded dual 1 ohm,got it from a guy that never used it,still in the crate..my main question is what is the xmax on this style btl and are these still in production?? Any input is greatly appreciated..thanks!!

Have any of you used an SSD 10 for home subwoofer use and does it work well. I have a high quality 2 channel stereo system at home and use a subwoofer to fill in the bottom end. My present sub has an RE Audio SR10 dual 2 ohm driver and a 500 watt rms amplifier. I am wondering if I would get an improvement by using a Fi SSD 10 dual 2 ohm driver. It would be used in a sealed enclosure to get best quality bass and be the high QTS version. Any opinions would be welcome. I am a bit confused about cabinet size as I keep seeing different optimum box sizes quoted, ideally I would like to know what the HQTS actually is so that I can model it in WIN ISD. I assume all other T&S …

im ordering ssd12's and i dont know wat to pick between standard or h qts.. i have no idea wat it means, so if anyone knows please tell me. thanks

Like title says........what is the recomended port area for an X 10? It will be in .75cuft using aero port...............I'm thinking I read a 2.5" was enough once just need confirmation.

i currently ordered a btl 18 with 2100w amp and i also got a new high output alternator and kinetic HC 1800 high current power cell to replace my standad battery and was wondering if i need another battery?? just confused because do i need one under my hood and one next to the amp or just one? and if i need two can i get one smaller one for the back?

hey guys i was looking for someone to help me try to design a dual reflex bandpass for my 2 15's, idk if this is something that each sub would beed its own box, if so thats fine but i would like both of them to be in the same one. if this is gonig to be a bad idea just tell me and i can make a slot ported box for them. i would just going to try something new. hoping to have them tuned to about 32-34hz i will be running them off a BC5500d. i have 4 yello caps, with another under the hood. i am using 4 RF power series, 2 6.5's in the front and 2 6x9's in the back running off a rf T8004. big 3 done with fat mat everywhere. planning on using MDF with a lot of fiberglass on th…

ive spent about 4 hours trying to figure out how ohms work. i feel like im the only one that gets confused on this subject. apparently is simple. someone help. im going to get a btl 18 inch but im not sure if i need to get a dual 1 or dual 2. i want to run a Hifonics amp thats at least 2000w. but if someone could tell me what the ohms have to be on the amp for me to get. or if someone could suggest a Hifonics amp for me. that would be greatly appreciated. on another subject...... what are some decent quality speakers that go with this? (6.5 inch speakers) or just tell me some good companies to buy from

I have a fi q 12. I didnt choose the high qts option because i had planned for a ported box, but ported is wayy to big for my little trunk lol Would it matter if i put the sub, without the high qts, in a sealed box? If it matters, im going to put it in the smallest bOx possible. I dont plan on running the sub to the max, just some extra bass for daily driving. Also, i hate rattling, so you can bet i wont run it any where near max output.

I have a fi q 12. I didnt choose the high qts option because i had planned for a ported box, but ported is wayy to big for my little trunk lol Would it matter if i put the sub, without the high qts, in a sealed box? If it matters, im going to put it in the smallest bOx possible I dont plan on running the sub to the max, just some extra bass for daily driving. Also, i hate rattling, so you can bet i wont run it any where near max output.

I bought a fi q 12 last year. I bought it with the intention to put it in a ported box. I have a genesis, the box is wayy to big for my trunk. I kept the sub in my garage until now. im planning on making the smallest sealed box possible for the sub, which i beleive is .8 . I selected a whole bunch of options, cant remember which ones though. Are there any options on the fi website that says the sub would have to be exclusivly for ported boxes? I know they have the high qts option, for sealed boxes. Im not too good with all these subwoofer terms, lol. I just want to know if i can put the sub in a sealed box without worrying im going to mess the sub up.

Hello, i want to build a box for (2) FI Q 15s, here is the size of the area i have too work with WIDTH = 32 INCHES HEIGHT = 18 INCHES DEPTH = 29 INCHES I will be able to add height to the box if I shorten the depth for a sealed box i can use the cutout sheet that FI recommended at 2.5 c.f., i'll just build two seperate boxes then just bolt them together. now for a ported box i have no idea what volume or what to tune it to??? i listen to metal, rock, country, blues,everything inbetween, but i don't listen to rap. FI specs for a ported box is 2.8 - 4 cu. ft. and use 12-16 sq. inches of vent area per cubic ft. of volume. i would like a box that would not be too boomy, i lik…

I was wondering if 1.75 net cubes per side is too small for a set of 12 inch Q's???

so im looking to build a new box for the blow through in my truck. trying to think of some new designs to make it interesting. is there any benefit to having the subs angle towards eachother? i was thinking having them facing eachother down the center with plexi on each end so you can see the inside. thoughts?

Hello everyone It has been awhile since ive las longed on to this accound but now im back. I got a Fi Bl 15" about 3 yrs ago and i would have to say it was the best/ loudest/best built sub ive ever come across. I had my box made by a guy out in Canada. His company name was Pound That Sound. Since i havent been on this website in awhile ive noticed that he no longs makes enclousres.... Ive been looking around for someone to help me with my next built since ive gotten a new car. Im sticking with the BL and i going to have the same set up likelast time, 1 BL 15" w/ hyper pole option. Now my question to anyone who wants to answer is... is there anybody you would recommend for…

hello im building a sealed box for 2 q15 subs in my 1996 honda civic hatchback, i have a few questions? 1.... should i have each sub in seperate chambers or the same chamber? what is the pros and cons of doing either? 2.... what kind of difference in sound should there be between the largest recommended size encloser and somewhere inbetween? and whats the pros and cons of each? 3.... what kind of effect would there be having the subs down facing? Now for my front stage i want some more midbass, i have 2 different types of 6.5 inch woofers, infinity perfect 6.1 and older set of diamond audio hex series, i was thinking of putting the infinitys in the doors and getting some …

Do you need big power to make the BL series subs play at their best? Will they play low and deep on 1,000 watts?

ive had a fi x 12 for a while now in a standard ported box i built. i want to spice it up a little by building a 4th order bandpass. Problem is i dont know the calculations for it. If someone could give me a hand in this it would be much appreciated. iw ould like to tune it to 35. if not that than 40.

Im considering eithet a 15" or an 18" Fi BL. I have an alpine mrd-m1005 amplifier (approx. 1100 watts rms @ 2 ohms). I want to stick this thing in a ported enclosure in the trunk of my cutlass, facing backwards. What would be the absolutely optimal enclosure size for these applications (both sub sizes)?

I'm just curious, what in the heck is the cause of my Fi SSD 15" terminals on basket to melt? I've think It's killed my amp - A kicker ZX1000.1 with little warning. I had everything wired correctly and it's been bumping flawlessly for several months when last week I noticed my amp was off. I started looking over all my wiring starting from the hood, to the amp, to the sub. When I pulled my sub out I noticed on one side of the coil the positive and negative, well rather the positive melted towards the negitive post and caused a short. Im just curious as to what caused this? I'm still running a stock alt in the car and I know the kicker amp drawed alot of power to whe…

Hey all, I've got two 12" SSD's coming in the next few days and I decided to get a headstart on building my box. I've raped the search tool and can't seem to find what I'm looking for. If anyone has some spare time and wouldn't mind doing a fellow enthusiast a HUGE favor, it wouldn't go unnoticed. I'm hoping to get a cutsheet for 2 12" SSD's (ported) for my 2008 Mazda 6 sedan. Here's the preferred specifications. W: 42" (MAX) H: 16" (MAX) D1: 21" preferred D2: 16" preferred Tuned from 30-33hz I'm thinking it'd be cool to have the subs forward-firing at an angle with the seats. Then I could just mount my amp on the trunk side. The angle would take much more advantage o…