Subwoofers / Speakers

Alright, well i saw a local add up, and look what i ended up getting! BTL N2 18" Picked it up used for $380. Looked pretty good in shape, im not going to be picky because Fi subs are very few up where i live. The only real 'damage' that i saw was the surround was a little bit frayed, but not too much. Here's a picture of it. Anyways! Im stoked. Somebody local has a Soundstream TDX2000D for sale so im pretty sure ill be picking that up to power this baby. All i need is my box design and i should be murdering my Impala.

My son really likes the SA8s and wants to upgrade his stereo system. Can someone help with a box design? I assume someone has done this already and has posted a box design of what they did. I've been looking but have found some crazy installs. We only want to do two subs. Ported since that is the recommended design. If going sealed does not hurt that much, then that would be an easier build. This will be our first sub project together so want to do something on the easy side. We built a pirogue so have skills. BTW, he will be powering these with a Cadence ZRS-2002 going with 2 channel, 2ohm loads. http://a248.e.akamai.net/pix.crutchfield.com/ca/learningc…

I have my 18" fi ssd running off a Sundown sax-1200d... I really want to upgrade or try something new, but I don't really want to spend tons.. If i don't get another 18 that can fit the box I already have, then I will probably just build a sealed box next. Some ideas i had but need input on are, an 18" xcon if I could find one used or a 18" btl used.. these could fit in my box already and use same tuning. OR I thought about like 3 SA-10's sealed? because someone on here has 4 sa-10s for sale.. But I dont know if sa-10s sound good/loud sealed, and are 3 sa-10s going to be much of an upgrade to an 18" ssd?.. I wish I could get like 3- 10" icons but noone has them used eve…

Been a while since I've posted on here, but I still have my Fi Btl 18" on a sundown saz3000d. However, I'm wanting to try something new and perhaps smaller. I'm in a toss up between ssa xcon, icon, or fi ssd. I'm wanting to do 2 12" subs, same amp, i listen to all types of music. I'm just wanting to get more acoustical sound in the sub stage, and go with a smaller box and hopefully have some nice sounding lows with as much output as the 18", if that makes any sense. I'm also open to any other sub suggestions. Thanks in advance!

alrighty lets try this again.. earlier i noted that i was looking for new 6.5 mid drivers. luck as i would have it my drivers side 6.5 went out the other day... so ive been looking around and the cadence cwm6 componets have caught my eye. however, im not entirely sure if they will fit due to the size of the magnet. aswell as depth... here is what i have to work with... here are the window tracks that make me question if they will fit.. just shy of 2 1/2 inches and here is the MAX depth before the window.. just a little past 3 inches with spacers maybe its possible to push the speakers forward? it almost seems i have about 3/4 of an inch to push forward.. i want to …

In my introduction thread, i had a few set ups for my dodge intrepid that I had in the past and the present one that I do have. My new project is my suburban ls What I am looking for out of my subs is just something that is really hitting hard and worth my money. my thoughts have been -four 15 in subs -two 18 in subs (fi btl's) the amp i plan on running on any set up will be the 2500d orion i am really interested in the Pioneer Premier TS-W8102SPL. has anyone ever that sub as a set up or know any good information about it? i just need some ideas and some knowledge on what will work best for me.

Hey guys, I'm finally biting the bullett and putting some bass in my 2012 Mustang 5.0... It has the shaker 500 system, but I def need more thump. My available dimensions are 38"W x 15"H x 11"D Those are the Max dimensions for the space I want to take up. It calculates out to 2.7ft^3 using the max dimensions. I am trying to pick between 3 10's in a sealed box, or 2 12's sealed, or one 12 ported.... I initially wanted a single 15 sealed but I just don't have the height as my MAX height is 15" for the box. I will be powering it with a Hifonix bxi1610d (1600wrms@1ohm). I have been looking at 3 10w3v3's, or type-r's, as those can both be had fairly cheap online. Any ot…

I was wondering if there was anyone around that can recone 6.5in mids? One was defective when I recieved the set and the store I bought it from wants me to uninstall the entire comp set and then pay to have them warrantied (not happening). Anyway, I haven't done much research so if anyone knows anybody who can do it then great. They are the mids from the Cadence CWM-6KIT. The recent ones, they're all over eBay. Thanks in advance.

What would you say is better for a single sub set up in general after giving whatever power needed and space required? I've been comparing T/S parameters but just want other people's opinions.

I got my brand new DC lvl 3 15" today. To start off i have to say the build quality is very good! It has 5 stiff spiders. Everything looks similar to what would be on an Fi sub/Ascendant/Sundown.. As for entry level. On to the sound... The low end is killer, top isn't as nice.. Dosnt play anything too audiable from 65hz and up. Enclosure is 7.2^ft gross, 3.7 cubic ft net tuned at 30hz, peaking at 45hz. Power handling on 2200rms isn't at its best but it can definatly take it for short burps/demos. I would recomend around 800rms to get this thing moving good. Overall it is a good sub and can get loud. Dosn't have the SQ of my old Fi Q but maybe its the enclosure... Output-7…

Alright so I have had my 18" fi ssd for about a year and want to upgrade, A guy locally on c-list is selling a 12" Fi BTL and I thought about buying that as an upgrade to my 18" ssd.. Question is, will i really gain much from this upgrade? I believe it is a new btl n2 series 12". Since my current sub is an 18" and tuned to 32hz it hits pretty freaking loud and low, So im just trying to see if any of you with more experience in different subs know if it will be noticeably louder?? its only a 12? Currently I am running a Sundown SAX-1200d but i could also sell that/trade for an AQ2200 if needed to get more power for the btl if it will even help or make a difference. I just…

So I have an 08 Grand Prix GXP currently with one 12" xcon in a khaotic enclosure and it beats hard and sounds good. Powered by a stetsom 1.5k. But I havent done a project in a while and I kinda want more bass in my car. Recently added memphis pf 6.5's and 6x9's powered by my p400-4. I found 2 12" 1500 series dd's a guy has for sale with a custom built box with 6.5 cf for $225. Would this beat harder than my xcon. I know its a good deal but if it dont get me anywhere no need for the buy. If this isnt a upgrade let me know what you guys think would be a better 2 sub combination than my single xcon or even a better single combo just figured might as well throw another sub i…

well, decided to jump on the bandwagon again. i've decided i want some decent entry level comps. i've been looking at morel maximo 6.5s.. anything else around $120 that would suit my needs? wanted to stay right at $100 but unfortunately i saw nothing in the classifieds that would suit my needs

I have narrowed my selection down to the dayton rss woofers and either the Fi x10 or dcon 10. I would just like to know what the differances between the Fi and x would be? I know the Fi is rated a little higher power handling but that is really not important to me. I have heard the dcon is a pretty good SQ driver, is the X also? I'm not concerned with which will be louder, because I think these two 10's would be pretty close. Also would like to know if they would play up to around 80hz or so without rolling off real quickly. Anyone with any insight to these two woofers your comments would be appreciated. Tony Nelson

Hey guys i built a 4.0cuft.box tuned to 30hz for two Dcon 12D4's, but they not back in production yet. So i took a look at the IA187 12-D4, how do they sack up to the Dcon,i would like to use the same box i have already built. Sould I wate for the Dcon or buy the 187 ? PS. my amp is a R/F T500-1 bdCP. help me out please, thanks guys.

Im thinking of getting (4) Selenium 6w4p speakers and curious which four channel amp you guys would recommend for them? Im not sure if around 150 bucks will give me a decent amp or not, but that's prob as high as i would like to go price wise! Let alone. What do you guys think of Selenium? Im def in need of better midbass and those seemed to catch my eye. So throw me some amp suggestions and that would be great!! Thanks guys!

My homie thinks that two 200rms MTX thunders sound better than one 600rms sa12 What do y'all think? I'm pretty sure one SA12 sounds better because it will have 600rms of power to it compared to the mtxs with 400rms of power to them. Which do you think will sound better musically? The mtxs will be sealed and the sa12 ported and both powered by true rms power and same vehicle say a 99 honda civic same electrical and everything, which would sound better? Im gona go with the sa12 because mtxs aren't that good of subs and the sa12 is very good. Determining an answer will determine his decision on what to pick for his system. Two 12" MTX thunders on 400rms sealed Or One 12" …

ok my speakers have been working fine. i get in my truck today and the right side is like screaming with static the left side works fine. i turn the stereo off and it stops. any ideas help? edit: i have ia comps

My 96 Saturn SL2 has no trunk so I was going to move to infinite baffle to gain trunk space. I currently run a Zapco Ag650 pushing Image Dynamic HLCDs, 6.5s, and a pair of Aura Bass shaker Pros under the seats. My subs are currently Orion HCCA 12D4s driven by a Mark Antony MK2500D and according to my amperage draw and ohms law it tops out around 1600 watts. I may be reducing equipment to cut down on the room taken up. My wife has children and we are expecting twins. I have an Audiocontrol Epic-160 in the dash to dial down the bass on the subs. I am hoping the bass shakers give me the bump I want to feel without being to much for the family. I am considering either using a…

recently just got my hands on four of these guys for 40 bucks was wondering if anyone knew anything about them? found they want .75 ported but id like to do something fun with them, 4th order bp maybe for the hell of it?

What is your opinion on the SI MAG v.3 12"? What year were they made and what year did they stop making them?

well my solo x's will be here monday, so id like to get started on box plans. my max dimensions are 50"wide,21"tall, and 15deep which if used all that with no port is 7.388 now i know once i add port, and displacment of the sub, it will go down. id like to get atleast 3.0cf for each sub.the more the better lol as for tuning, im not so sure. i like lows so i was thinking around 32Hz?? if anyone has a better suggestion, please let me know.im building 2 seperate boxes so when i sell them, they will be much easier to sell. the recommended ported box for 1 10 is 2.25-6.0cf. as for an amp, i am saving for a audiopipe 3000d (315 shipped w.warrenty) or if i can find a better amp…

SO... im trying to gat an idea of what im going to do for my setup in the wagon. I will be walling it off. As some of you know... I bought a new daily driver that I gotta get running. So this build will be after all that is done. I just want to get an idea of what I will be doing. my original idea was to go with 4zconsa on 4saz3ks. But I was thinking... would a bunch if Dcons get louder? My goal id obviously to get loud while sound good doing it...that's why im going with SSA. I was thinking of doing something like a clamshell if I do the icons. Maybe like 16 12's or 10's. Something like that. Maybe on 2 saz3500s. Just trying to get some opinions.

which sub do u guys think is louder? both in there optimal boxes with rms power going to each in the same vehicle. iv been watching video on both and it got me thiinking

I am looking at the skar vvx 12's and AA arsenal 12's, right now I am leaning towards skar 12's. they will be powered by mb quart discus 1500