StreetLegal

id do it that way but more than 2 amps and id run a relay ^ x2

Its the dual 4 sa-10, and the amp is a Soundstream stealth 1200D. The amp is rated at 700wrms at 2ohms Should match well.

need more info. Give us as much info on the sub as possible, and amp if possible. Is it the dual 2 ohm or the dual 4 ohms sa-10? Is that 700 watts rms or peak? and at what ohm?

nicely done...

product manual says external fusing, 250 amps for the brz2400, I would put one 250 amps fuse as close to the amp (around 10 or 15 inches, thats just me). The fuse under the hood is to protect the zero guage wire and rated for that wire, but I would use a 250 amps fuse there too, and it should be close to the battery approximately 18 inches or so...

that's alot of amp

some pics of the screws would certainly help if you can get a vice grip to lock tightly on the screw head it may be able to turn. Sometimes the manufacturer uses loctite to bond the threads. In trems of drilling, start with a resonably small drill bit drilling straight through the screw, then increase the size of the bit until the screw becomes loose, be careful not to break the bit or damage the threraded portion on the vehicle frame.

^2

Merry Christmas everyone.

^2

excellent vid, very professional

true

good alternative

sax 1200D... you cant go wrong with sundown

wow...wdf

all the best on your special day ...

A spacer ring is a good idea...

excellent choice